| On the injection molding of nanostructured polymer surfaces.: An article from: Polymer Engineering and Science | Digitalby Henrik Pranov (Author), Henrik Koblitz Rasmussen (Author), Niels Bent Larsen (Author), Nikolaj Gadegaard (Author)
| List Price: | $5.95 | | | Available: | Available for download now |
| | Binding: | Digital | | Publisher: | Thomson Gale | | Page Count: | 25 Pages | | Publication Date: | February 01, 2006 |
|
EDITORIAL REVIEWS |
Product Description
This digital document is an article from Polymer Engineering and Science, published by Thomson Gale on February 1, 2006. The length of the article is 7496 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.From the author: Well-defined nano-topographies were prepared by electron-beam lithography and electroplated to form nickel-shims. The surface pattern consisted of square pillars repeated equidistantly within the plane of the surface in a perpendicular arrangement. The width and distance between the squares both ranged from 310 to 3100 nm. All the pillars were 220 nm high. The nickel-shim was used as a surface-template during injection molding of polycarbonate. Secondly, a nickel shim, with a surface pattern consisted of a squared sine with a period of 700 nm and amplitude of 450 nm, was mounted on, and it was in good thermal contact with the upper plate in a hot-press. Polycarbonate/polystyrene was melted on the lower plate while the temperature of the shim was kept below the glass transition temperature. The upper plate was lowered until the shim was in contact with the melt. Experiments were carried out with a clean shim and a shim coated with a monolayer of fluorocarbonsilane. As a result of the surface coating, the amplitude of the replicated grating decreased from about 350 nm in polycarbonate and 100 nm in polystyrene to less than 10 nm. The experiments strongly suggest that the possibility to injection mold sub-micrometer surface structures in polymers mainly relates to adhesive energy between polymer and shim. POLYM. ENG. SCI., 46:160-171, 2006. [c] 2005 Society of Plastics EngineersCitation DetailsTitle: On the injection molding of nanostructured polymer surfaces.Author: Henrik PranovPublication: Polymer Engineering and Science (Magazine/Journal)Date: February 1, 2006Publisher: Thomson GaleVolume: 46 Issue: 2 Page: 160(12)Distributed by Thomson Gale |
|
