Science Resources RSS Feeds
|
 |
 |
 |
| View Larger Image | Arctic Silver 5 Thermal Compound 3.5 Grams with ArctiClean 60 ML Kitby Arctic Silver
| 3 New starting at: | $12.99 |
| |
| | Publisher: | Arctic Silver |
|
FEATURES | - *Arctic Silver 5 3.5g is Non-electrically conductive. Will not separate run migrate or bleed
- Thermal Conductance: >350 000W/m2 °C (0.001 inch layer)
- *ArctiClean 60ml kit Includes both ArctiClean 1 (30ml) and ArctiClean 2 (30ml)
- Easy to Use and Cleans heatsinks and other computer components in under a minute!
- *Bonus MicroFiber cleaning cloth included
|
EDITORIAL REVIEWS |
Product Description
*Arctic Silver 5 With its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles is optimized for use between modern high-power CPUs and high performance heatsinks or water-cooling solutions. *ArctiClean is a two-step cleaning process that removes existing thermal grease or pads and prepares the thermal surface for a fresh application of thermal interface material. ArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 Thermal Surface Purifier and some gentle wiping then removes the remaining residue and inhibits flash corrosion on copper or aluminum. *Bonus MicroFiber cleaning cloth included |
CUSTOMER REVIEWS (Average Customer Rating: 5.0 based on 4 reviews)
|
Reputation already established by Ralph Henderson (CO, USA)  5 Stars
August 30, 2009
Hey, it is Arctic Silver 5 Thermal Compound and that's why I ordered it. :-)
| |
Great Product by Ray (Florida) 5 Stars
March 29, 2009
This was my first time applying thermal compound to an aftermarket heatsink (I always used thermal pads before) so I decided to go with this kit in case I needed to remove it because I put too much or put it on the wrong way (which I did a couple of times). The kit has enough thermal grease and cleaning liquids to apply to at least 10 heatsinks (I know I wasted like 4 applications because I put on too much and it spread outside of the heatsink after moving the heatsink around).
The price for shipping may seem a little bit high but it still comes out to less money then it would if you buy it from any other major online retailer and you wouldnt get the microfiber cloth from other retailers.
I would highly recommend this kit if its your first time playing around with thermal grease, and a tip from me:
The best way to apply the thermal grease is to put a tiny little dot in the middle of the heatsink (not too much or it will go outside of the heatsink when you mount it on top)... I tried the "Line" technique that Arctic Silver suggested on their site for Intel i7 CPU's and it became a big mess when I placed the heatsink on top of it and moved it around a little.
| |
Cooled my CPU by 20-25C by Robert E. Lightbourne (NJ United States) 5 Stars
February 12, 2009
Until very recently my Sony Vaio desktop with 3.2GHz P4 had CPU temps between 40C and 80C, very frequently exceeding 70C whenever the CPU was exercised heavily.
I searched Amazon for a cooling solution. I could not find with certainty any mechanical heatsink+fan that would properly attach to my mobo. Then I noticed the listings for thermal pastes and was intrigued that one of the offerings, Arctic Silver 5 Thermal Compound, averaged 5 stars from 17 customers, indicating either a great product or false info, but I've noticed that on Amazon, falsely inflated 5 star ratings by shills for the manufacturer tend to be negated over time by angry buyers who had negative experiences.
I tried the Arctic Silver 5 along with the ArtiClean kit. Nothing false about the 5 star rating. It's worked very well on my system. The highest CPU temp yet observed is 55C, and the CPU typically operates at 48-52C once warmed up.
Nathan Beauchamp states that Arctic Silver 5 comes with poor instructions. It's certainly true that the kit itself comes with virtually no documentation, and my initial look at the website found nothing. However, after some further digging I found the following link that gives authoritative directions -- http://www.arcticsilver.com/arctic_silver_instructions.htm.
Quite frankly, I am amazed that a paste can have so much effect on cooling.
| |
A necessity if you're replacing your CPU by Nathan Beauchamp (Oak Park, IL USA) 5 Stars
December 22, 2008
Arctic Silver 5 (or AS5) is the best thermal compound on the market IMHO. It's basically an essential if you're installing a new CPU. This kit is everything you need to clean your heat sink, prepare the surface of the heatsink and your CPU, and ensure that your chip functions at the coolest temps possible.
If you apply the compound correctly, the result is always a 4-10c drop in CPU temperatures under load. You will not notice a huge difference at idle. The real gains in heat dissipation come when the CPU is being pushed. Also, don't trust the board maker's proprietary software to tell you what your temperatures are; download a good program like RealTemp 2.41 or Everest for free (use google to find them). Either will give you more accurate numbers than Asus PC Probe, or whatever software your board manufacturer supplies.
The instructions provided with this kit are minimal (small text on the side of the bottles) and could be confusing if you've never used thermal paste before, so here are some detailed instructions that will help you do it right. Here is the process:
1. Remove the old thermal compound. This is accomplished by using the remover (bottle 1). Apply a several drops of the cleaner to the top of the chip and let it soak for 20-30 seconds. You might have to reapply more drops of cleaner again depending on how much thermal compound was present on the chip to begin with, or how hard it's gotten over time. Wipe all the waste off with a lintless cloth or cotton swabs. You might have to do this several times. Make sure you get it as clean as you can before moving to step 2.
2. Apply the surface cleaner (Bottle 2). Apply several drops, and then work them over the entire surface of the chip or heatsink in a circular motion. Make sure there are no traces of the old compound. You can tell that the surface is perfectly clean when you can wipe it with a new q-tip and it comes away pure white.
3. Apply Arctic Silver 5. DO NOT USE TOO MUCH! If you do, it will squish outside the edge of the chip, get on your motherboard, the CPU locking mechanism, your hands, etc... It makes a real mess. Start with a small amount and add more if necessary. The idea here is to get a THIN, EVEN LAYER across the entire chip surface. A toothpick actually work's really well at spreading the paste around. You should not be able to see any part of the metal of the chip when you're done. Less is more in this instance; many people think they need to slather this stuff onto the chip, but trust me that does nothing but make a mess.
4. Install your heat sink and fan assembly. I recommend getting an aftermarket heat sink as those provided by Intel are notoriously poor. Zalman makes some great ones. Do NOT buy on that uses push pins to lock in place. You want one with screws and mounting bracket so that it is very securely attached to the motherboard and in turn, your CPU. This is probably equally important to applying the thermal compound correctly, because all the compound in the world won't help you if the heatsink isn't making solid contact with the chip's surface.
If you follow those steps, you will see a massive improvement in your core temps. Just remember that heat dissipation is achieved by the fans in your case and heatsinks, not the compound itelf. The compound simply allows for a much better transfer for heat from chip-->heatsink. I swear by Arctic Silver, and I promise you it works if you use it correctly.
| |
SIMILAR PRODUCTS |
| Xbox 360 Repair Kit - X-Clamp Hardware Replacement
by Microsoft
If your Xbox 360 console has stopped working, then this is the product you need! Included with the price you will receive the following: 8 Thin Head Screws 16 Black Nylon Washers 16 Lock Tight Metal Washers With the above materials, you will be able to fix your Xbox 360 consoles in under 1 hour. No experience is required to repair your console. Step by step instructions are included along with 24x7 support.
| 
| Bondhus 12632 GorillaGrip, Set of 8 Star Fold-up Keys, sizes T6-T25
by Bondhus
Hex & Torx Keys, Drivers, & Sets Tool Type: Torx®/Hex End Combo Keys Fastener Type: Standard Hex/Torx® Measurement Type: Inch/Torx® Handle Type: Fold-Up Torx Size Range: T6 - T25 Container Type: Carded
| 
| Pico 9202K 5mm Metric Flat Washer 20 per Package
by Pacific Industrial Components
PICO's Metric Fasteners are the highest quality grade 5, zinc plated steel. All items are conveniently packaged in our consumer "K" pack.
| 
| Nylon Flat Washer,#10
by Dubro Products
Today, many modelers are using a socket head bolt with a nylon washer for wing bolts and many other uses.
| 
| Nylon Metric Flat Washer DIN-125 M5 5.30mm ID x 11.00mm OD x 1mm Thick (Pack of 100)
by Small Parts
Frequently used as a material for bearings and other wear surfaces, Nylon 6/6 offers low friction and good fatigue resistance. Nylon has been used in temperatures as low as -40F (-40C). Under flexural load of 264 PSI it endures temperatures as high as 158 to 212F (70 to 100C). Plus it stands up to a wide spectrum of fuels, oils and other chemicals.
|
|
|
|
