Science Current Events | Science News | Brightsurf.com
 

Carbon dioxide captured from air converted directly to methanol fuel for the first time

February 03, 2016

They're making fuel from thin air at the USC Loker Hydrocarbon Research Institute.

For the first time, researchers there have directly converted carbon dioxide from the air into methanol at relatively low temperatures.

The work, led by G.K. Surya Prakash and George Olah of the USC Dornsife College of Letters, Arts and Sciences, is part of a broader effort to stabilize the amount of carbon dioxide in the atmosphere by using renewable energy to transform the greenhouse gas into its combustible cousin - attacking global warming from two angles simultaneously. Methanol is a clean-burning fuel for internal combustion engines, a fuel for fuel cells and a raw material used to produce many petrochemical products.

"We need to learn to manage carbon. That is the future," said Prakash, professor of chemistry and director of the USC Loker Hydrocarbon Research Institute.

The researchers bubbled air through an aqueous solution of pentaethylenehexamine (or PEHA), adding a catalyst to encourage hydrogen to latch onto the CO2 under pressure. They then heated the solution, converting 79 percent of the CO2 into methanol. Though mixed with water, the resulting methanol can be easily distilled, Prakash said.

The new process was published in the Journal of the American Chemical Society on Dec. 29. Prakash and Olah hope to refine the process to the point that it could be scaled up for industrial use, though that may be five to 10 years away.

"Of course it won't compete with oil today, at around $30 per barrel," Prakash said. "But right now we burn fossilized sunshine. We will run out of oil and gas, but the sun will be there for another five billion years. So we need to be better at taking advantage of it as a resource."

Despite its outsized impact on the environment, the actual concentration of CO2 in the atmosphere is relatively small - roughly 400 parts per million, or 0.04 percent of the total volume, according to the National Oceanographic and Atmospheric Administration. (For a comparison, there's more than 23 times as much the noble gas Argon in the atmosphere - which still makes up less than 1 percent of the total volume.)

Previous efforts have required a slower multistage process with the use of high temperatures and high concentrations of CO2, meaning that renewable energy sources would not be able to efficiently power the process, as Olah and Prakash hope.

The new system operates at around 125 to 165 degrees Celsius (257 to 359 degrees Fahrenheit), minimizing the decomposition of the catalyst - which occurs at 155 degrees Celsius (311 degrees Fahrenheit). It also uses a homogeneous catalyst, making it a quicker "one-pot" process. In a lab, the researchers demonstrated that they were able to run the process five times with only minimal loss of the effectiveness of the catalyst.

###

Olah and Prakash collaborated with graduate student Jotheeswari Kothandaraman and senior research associates Alain Goeppert and Miklos Czaun of USC Dornsife. Their research was supported by the USC Loker Hydrocarbon Research Institute, and their paper can be found online here: http://pubs.acs.org/doi/abs/10.1021/jacs.5b12354

University of Southern California


Related Methanol Fuel Current Events and Methanol Fuel News Articles


Better catalysts for green energy
What is a catalyst? A material that facilitates (increases the speed and likelihood of) a chemical reaction. In general, catalysts are rare metals (platinum, for example), which are often used in the form of nanoparticles. In the field of renewable energy, catalysts are crucial, and scientists are striving to maximize their efficiency (in part also to avoid wasting these precious materials).

New concept of fuel cell for efficiency and environment
The Center for Nanoparticle Research at the Institute for Basic Science (IBS) has succeeded in proposing a new method to enhance fuel cell efficiency with the simultaneous removal of toxic heavy metal ions.

Environmentally friendly, energy-dense sugar battery developed to power the world's gadgets
A Virginia Tech research team has developed a battery that runs on sugar and has an unmatched energy density, a development that could replace conventional batteries with ones that are cheaper, refillable, and biodegradable.

Virginia Tech researcher develops energy-dense sugar battery
A Virginia Tech research team has developed a battery that runs on sugar and has an unmatched energy density, a development that could replace conventional batteries with ones that are cheaper, refillable, and biodegradable.

Metal-free catalyst outperforms platinum in fuel cell
Researchers from South Korea, Case Western Reserve University and University of North Texas have discovered an inexpensive and easily produced catalyst that performs better than platinum in oxygen-reduction reactions.

MIT creates new material for fuel cells
MIT engineers have improved the power output of one type of fuel cell by more than 50 percent through technology that could help these environmentally friendly energy storage devices find a much broader market, particularly in portable electronics.
More Methanol Fuel Current Events and Methanol Fuel News Articles

Methanol Fuel Cell Systems: Advancing Towards Commercialization

Methanol Fuel Cell Systems: Advancing Towards Commercialization
by Dave Edlund (Author)


This book details state-of-the-art fuel cell systems incorporating methanol reformers as the source of purified hydrogen (rather than compressed hydrogen). Beginning with an overview of PEM fuel cells, the book discusses the various technical approaches to methanol reforming and hydrogen purification. A unique theme carried throughout the discussion is the practical aspects of commercial applications that favor one technical approach over another. The reader gains an understanding of the chemistry, engineering, economics, and agency certification requirements that ultimately shape the optimal approach for methanol fuel cell systems targeting commercial applications.

Brief Summary of the Technical Feasibility Emissions, and Fuel Economy of Pure Methanol Engines

Brief Summary of the Technical Feasibility Emissions, and Fuel Economy of Pure Methanol Engines
by U.S. Environmental Protection Agency (Creator)


The U.S. Environmental Protection Agency (EPA) was introduced on December 2, 1970 by President Richard Nixon. The agency is charged with protecting human health and the environment, by writing and enforcing regulations based on laws passed by Congress.

The EPA's struggle to protect health and the environment is seen through each of its official publications. These publications outline new policies, detail problems with enforcing laws, document the need for new legislation, and describe new tactics to use to solve these issues. This collection of publications ranges from historic documents to reports released in the new millennium, and features works like: Bicycle for a Better Environment, Health Effects of...

Fuel Cells

Fuel Cells
by Paul Breeze (Author)


Fuel Cells is a concise, up-to-date and accessible guide to the evolution of the use of electrochemistry to generate power. The author provides a comprehensive exploration of the history of fuel cells, the environmental concerns which came into prominence in the 1980s and the economic factors associated with this method of power generation. Examples discussed include Alkaline Fuel Cells, Phosphoric Acid Fuel Cells, Molton Carbonate Fuel Cells and Solid Oxide Fuel Cells, making this a valuable and insightful read for those in the power generation market and those in electrochemistry, such as engineers, managers and academics.Explores multiple variations of fuel cell technology and evaluates their cost and applicationProvides detailed historical context, beginning in 1839 with the...

Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology: Volume 2: In Situ Characterization Techniques for Low Temperature Fuel Cells (Woodhead Publishing Series in Energy)

Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology: Volume 2: In Situ Characterization Techniques for Low Temperature Fuel Cells (Woodhead Publishing Series in Energy)
by Christoph Hartnig (Editor), Christina Roth (Editor)


Polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) technology are promising forms of low-temperature electrochemical power conversion technologies that operate on hydrogen and methanol respectively. Featuring high electrical efficiency and low operational emissions, they have attracted intense worldwide commercialization research and development efforts. These R&D efforts include a major drive towards improving materials performance, fuel cell operation and durability. In situ characterization is essential to improving performance and extending operational lifetime through providing information necessary to understand how fuel cell materials perform under operational loads.

Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology,...

Fuel Cell Electronics Packaging

Fuel Cell Electronics Packaging
by Ken Kuang (Editor), Keith Easler (Editor)


Today's commercial, medical and military electronics are becoming smaller and smaller. At the same time these devices demand more power and currently this power requirement is met almost exclusively by battery power. This book includes coverage of ceramic hybrid separators for micro fuel cells and miniature fuel cells built with LTCC technology. It also covers novel fuel cells and discusses the application of fuel cell in microelectronics.

A Life of Magic Chemistry: Autobiographical Reflections Including Post-Nobel Prize Years and the Methanol Economy

A Life of Magic Chemistry: Autobiographical Reflections Including Post-Nobel Prize Years and the Methanol Economy
by George A. Olah (Author), Thomas Mathew (Contributor)


The autobiography of a Nobel Prize winner, this book tells us about George Olah's fascinating research into extremely strong superacids and how it yielded the common term "magic acids." Olah guides us through his long and remarkable journey, from Budapest to Cleveland to Los Angeles, with a stopover in Stockholm. This updated autobiography of a Nobel Prize winner George A. Olah:

Chronicles the distinguished career of a chemist whose work in a broad range of chemistry areas, and most notably that in methane chemistry, led to technologies that impact the processing and utility of alternative fuels Is based on Olah's work on extremely strong superacids and how they yielded the common term, "magic acids" Details events since the publication of the first edition in 2000 Inspires...

The Book On Biodiesel: The "How To" Guide for making your own  biodiesel fuel - safely, with step-by-step instructions plus a great read on the subject, all here in Merv's biodiesel handbook.

The Book On Biodiesel: The "How To" Guide for making your own biodiesel fuel - safely, with step-by-step instructions plus a great read on the subject, all here in Merv's biodiesel handbook.
by Mervyn E Rees (Author)


If you would like to make your own biodiesel fuel, or if you simply want to understand the world-wide fascination with its extraordinary potential, you'll need to know all the basic facts around the manufacturing process of biodiesel. While reading this phenomenal pocket-sized book, you'll learn of the skills and techniques required to actually make this fuel at your own home, and you'll develop an exacting knowledge of the materials and equipment necessary for making biodiesel from scratch, whether for your own personal applications or for creating a thriving long-term business! In your ongoing process of discovery, by following these simple, step-by-step instructions and diagrams, you'll quickly become capable of using the necessary chemistry - and before you know it, as you develop a...

Methanol: The Basic Chemical and Energy Feedstock of the Future: Asinger's Vision Today

Methanol: The Basic Chemical and Energy Feedstock of the Future: Asinger's Vision Today
by Martin Bertau (Editor), Heribert Offermanns (Editor), Ludolf Plass (Editor), Friedrich Schmidt (Editor), Hans-Jürgen Wernicke (Editor)


Methanol - The Chemical and Energy Feedstock of the Future offers a visionary yet unbiased view of methanol technology. Based on the groundbreaking 1986 publication "Methanol" by Friedrich Asinger, this book includes contributions by more than 40 experts from industry and academia. The authors and editors provide a comprehensive exposition of methanol chemistry and technology which is useful for a wide variety of scientists working in chemistry and energy related industries as well as academic researchers and even decision-makers and organisations concerned with the future of chemical and energy feedstocks.

Direct Methane to Methanol: Foundations and Prospects of the Process

Direct Methane to Methanol: Foundations and Prospects of the Process
by Vladimir Arutyunov (Author)


Direct Methane to Methanol: Foundations and Prospects of the Process offers a state-of-the-art account of one of the most interesting and potentially commercial technologies for direct conversion of natural gas into valuable chemicals. The book thoroughly explains the complex and unusual chemistry of the process, as well as possible applications for direct methane to methanol (DMTM). It covers topics involving thermokinetics, pressure, direct oxidation of heavier alkanes, and more, and provides detailed appendices with experimental data and product yields. This book provides all those who work in the field of gas processing and gas chemistry with the theory and experimental data to develop and apply new processes based on direct oxidation of natural gas. All those who deal with oil and...

The 2018-2023 World Outlook for Direct Methanol Fuel Cells (DMFC)

The 2018-2023 World Outlook for Direct Methanol Fuel Cells (DMFC)
by Icon Group International (Author)


This study covers the world outlook for direct methanol fuel cells (DMFC) across more than 190 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region, and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized...

© 2017 BrightSurf.com