 |
|
Finding the true measure of nanoscale 'roughness'
June 17, 2005Straight edges, good. Wavy edges, bad. This simple description holds true whether you are painting the living room or manufacturing nanoscale circuit features.
In a technical paper* published in June, researchers at the National Institute of Standards and Technology (NIST) and SEMATECH describe an improved method for determining nanoscale "linewidth roughness," an important quality control factor in semiconductor fabrication. Their research shows that current industry measurement methods may be exaggerating roughness of the smoothest circuit features by 40 percent or more above true values.
As circuit features shrink in size to below 50 nanometers, wavy or rough edges within semiconductor transistors may cause circuit current losses or may prevent the devices from reliably turning on and off with the same amount of voltage.
"With this type of measurement," says NIST's John Villarrubia, "besides the real roughness there is also a false roughness caused by measurement noise. Our method includes a correction to remove bias or systematic error from the measurement."
Random noise, by definition, causes the measured value to be sometimes higher, sometimes lower than the true value, and can be minimized by simply averaging an adequate number of measurements. Systematic error, however, is consistently above or consistently below the true value due to some quirk of the measurement method.
The noise in nanoscale scanning electron microscope (SEM) images consistently adds extra roughness, says Villarrubia. The NIST/SEMATECH method involves taking two or more images at exactly the same location on a circuit feature, comparing the values, and subtracting the false roughness caused by measurement noise. SEM manufacturers should be able to incorporate the new method into their proprietary software for automated linewidth roughness measurements.
National Institute of Standards and Technology (NI
"With this type of measurement," says NIST's John Villarrubia, "besides the real roughness there is also a false roughness caused by measurement noise. Our method includes a correction to remove bias or systematic error from the measurement."
Random noise, by definition, causes the measured value to be sometimes higher, sometimes lower than the true value, and can be minimized by simply averaging an adequate number of measurements. Systematic error, however, is consistently above or consistently below the true value due to some quirk of the measurement method.
The noise in nanoscale scanning electron microscope (SEM) images consistently adds extra roughness, says Villarrubia. The NIST/SEMATECH method involves taking two or more images at exactly the same location on a circuit feature, comparing the values, and subtracting the false roughness caused by measurement noise. SEM manufacturers should be able to incorporate the new method into their proprietary software for automated linewidth roughness measurements.
National Institute of Standards and Technology (NI
Nanoscale News and Current Nanoscale Events RSSNIST studies how new helium ion microscope measures up
Just as test pilots push planes to explore their limits, researchers at the National Institute of Standards and Technology (NIST) are probing the newest microscope technology to further improve measurement accuracy at the nanoscale.
New 'nano-positioners' may have atomic-scale precision
Engineers have created a tiny motorized positioning device that has twice the dexterity of similar devices being developed for applications that include biological sensors and more compact, powerful computer hard drives.
Light touch: Controlling the behavior of quantum dots
Researchers from the National Institute of Standards and Technology (NIST) and the Joint Quantum Institute (JQI), a collaborative center of the University of Maryland and NIST, have reported a new way to fine-tune the light coming from quantum dots by manipulating them with pairs of lasers.
True properties of carbon nanotubes measured
For more than 15 years, carbon nanotubes (CNTs) have been the flagship material of nanotechnology. Researchers have conceived applications for nanotubes ranging from microelectronic devices to cancer therapy. Their atomic structure should, in theory, give them mechanical and electrical properties far superior to most common materials.
Self-assembling polymer arrays improve data storage potential
A new manufacturing approach holds the potential to overcome the technological limitations currently facing the microelectronics and data-storage industries, paving the way to smaller electronic devices and higher-capacity hard drives.
Turning Waste Material into Ethanol
Say the word "biofuels" and most people think of grain ethanol and biodiesel. But there's another, older technology called gasification that's getting a new look from researchers at the U.S. Department of Energy's Ames Laboratory and Iowa State University. By combining gasification with high-tech nanoscale porous catalysts, they hope to create ethanol from a wide range of biomass, including distiller's grain left over from ethanol production, corn stover from the field, grass, wood pulp, animal waste, and garbage.
Flexible nanoantenna arrays capture abundant solar energy
Researchers have devised an inexpensive way to produce plastic sheets containing billions of nanoantennas that collect heat energy generated by the sun and other sources. The technology, developed at the U.S. Department of Energy's Idaho National Laboratory, is the first step toward a solar energy collector that could be mass-produced on flexible materials.
New metamaterials that bend light backwards bring invisibility cloaks 1 step closer
Scientists at the University of California, Berkeley, have for the first time engineered 3-D materials that can reverse the natural direction of visible and near-infrared light, a development that could help form the basis for higher resolution optical imaging, nanocircuits for high-powered computers, and, to the delight of science-fiction and fantasy buffs, cloaking devices that could render objects invisible to the human eye.
A First in Integrated Nanowire Sensor Circuitry
Scientists at the U.S. Department of Energy's Lawrence Berkeley National Laboratory and the University of California at Berkeley have created the world's first all-integrated sensor circuit based on nanowire arrays, combining light sensors and electronics made of different crystalline materials. Their method can be used to reproduce numerous such devices with high uniformity.
Argonne scientists discover networks of metal nanoparticles are culprits in alloy corrosion
Oxide scales are supposed to protect alloys from extensive corrosion, but scientists at U.S. Department of Energy's Argonne National Laboratory have discovered metal nanoparticle chinks in this armor.
More Nanoscale News Articles
 | Fabrication Engineering at the Micro and Nanoscale (The Oxford Series in Electrical and Computer Engineering) by Stephen A. Campbell Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication. Completely revised and updated, the text covers the entire basic unit processes used to fabricate integrated circuits... |
 | Introduction to Nanoscale Science and Technology (Nanostructure Science and Technology) Nanoscale science and technology is a young, promising field that encompasses a wide range of disciplines including physics, chemistry, biology, electrical engineering, chemical engineering, and materials science. With rapid advances in areas such as molecular electronics, synthetic biomolecular motors, DNA-based self-assembly, and manipulation of individual atoms, nanotechnology has captured the... |
 | Nanoscale Energy Transport and Conversion: A Parallel Treatment of Electrons, Molecules, Phonons, and Photons (Mit-Pappalardo Series in Mechanical Engineering) by Gang Chen This is a graduate level textbook in nanoscale heat transfer and energy conversion that can also be used as a reference for researchers in the developing field of nanoengineering. It provides a comprehensive overview of microscale heat transfer, focusing on thermal energy storage and transport. Chen broadens the readership by incorporating results from related disciplines, from the point of view... |
 | Nanoscale Science and Technology Nanotechnology is a vital new area of research and development addressing the control, modification and fabrication of materials, structures and devices with nanometre precision and the synthesis of such structures into systems of micro- and macroscopic dimensions. Future applications of nanoscale science and technology include motors smaller than the diameter of a human hair and single-celled... |
 | MEMS & Microsystems: Design, Manufacture, and Nanoscale Engineering by Tai-Ran Hsu Technology/Engineering/Mechanical A bestselling MEMS text...now better than ever. An engineering design approach to Microelectromechanical Systems, MEMS and Microsystems remains the only available text to cover both the electrical and the mechanical aspects of the technology. In the five years since the publication of the first edition, there have been significant changes in the... |
| Nanoscale Science and Engineering Education by Aldrin E. Sweeney and Sudipta Seal Foreword by Professor Harold W. Kroto, Nobel Prize Laureate Dr. Mihail C. Roco, National Science Foundation, USA Rapid advances in nanoscience and nanotechnology research indicate a need for corresponding science, engineering and medical education efforts. Issues relating to K-12 scientific and technological literacy become even more pressing concerns, given the extent to which advances in... | |
 | Nanoscale Science by M. Gail Jones, Michael R. Falvo, Amy R. Taylor, Bethany P. Broadwell Futurists predict that nanotechnology will be the next major scientific revolution one with an even greater impact than the Industrial Revolution. Help middle and high school students understand the big implications of tiny technology with Nanoscale Science. Using guided inquiry with open-ended exploration where possible, the book s 20 investigations teach students about the unique... |
 | Microscale and Nanoscale Heat Transfer: Fundamentals and Engineering Applications by Choondal B. Sobhan, G. P. "Bud" Peterson Through analyses, experimental results, and worked-out numerical examples, Microscale and Nanoscale Heat Transfer: Fundamentals and Engineering Applications explores the methods and observations of thermophysical phenomena in size-affected domains. Compiling the most relevant findings from the literature, along with results from their own research activities, the authors provide a useful treatise... |
 | Light Scattering and Nanoscale Surface Roughness (Nanostructure Science and Technology) This book covers both experimental and theoretical aspects of nanoscale light scattering and surface roughness. Topics include: Spherical particles located on a substrate, surface and buried interface roughness, surface roughness of polymer thin films, magnetic and thermal fluctuations at planar surfaces, speckle patterns, scattering of electromagnetic waves from a metal, multiple wavelength... |
 | Self-Assembled Quantum Dots (Lecture Notes in Nanoscale Science and Technology) In recent years, the field of self-assembled quantum dots has shown great promise for nanoscale applications in optoelectronics and quantum computing. Worldwide efforts in both theory and experimental investigations have driven the growth, characterization, and applications of quantum dots into an advanced multidisciplinary field. Written by leading experts in the field, Self-Assembled Quantum... |
| © 2008 BrightSurf.com |