 |
|
Size matters: Friction, adhesion change on atomic level
June 30, 2005Physicists have a pretty good idea of what to expect when friction and adhesion occur in the visible world. You jam on the brakes, for instance, and your tires and the highway interact to stop your car. You glue two pieces of wood together, and they stick.
But how slippery or sticky are things that are too small to see? When solid surfaces no more than a thousand atoms across brush past each other, will they respond like the rubber and the road? Will they adhere like the wood and the glue?
The answer turns out to be "It depends," according to Johns Hopkins physicists who used computer modeling to examine how friction and adhesion operate on the atomic level.
"Any surface made of individual atoms has 'bumps' of atomic dimension, and being able to vary the placement of atoms [in the computer models] allowed us to quantify the influence of atomic structure," said Mark O. Robbins, a professor in the Henry A. Rowland Department of Physics and Astronomy in the university's Krieger School of Arts and Sciences.
The modeling showed that surfaces from a few to a thousand atoms across, with the same shape, but with different local structures, or "bumps," behave quite differently, even if those surfaces are made of the same material, Robbins said. Local stresses and adhesion forces can vary by a factor of two or more, and friction can change tenfold, he said.
The research is reported in the June 16 issue of the journal Nature by Robbins and graduate student Binquan Luan. Their findings could one day help in the successful design of nanomachines, the name given to devices built by manipulating materials on an atomic scale.
"Everyone knows that matter is made up of discrete atoms, yet most models of mechanical behavior ignore this and think of atoms as being 'smeared' into an artificial continuous medium," Robbins said. "This approach works well when describing the behavior of larger machines, but what happens when the whole machine is only a few to a thousand atoms across? The answer is crucial to the function of man-made nanomachines and many biological processes."
Robbins' and Luan examined contact between solid surfaces with "bumps" whose radii varied from about 100 to 1,000 atomic diameters. Bumps that size might be typical of nanomachine surfaces or the tips of atomic force microscopes used to measure mechanical properties at the atomic scale.
Using computer simulations, the team followed the displacements of up to 10 million atoms as the solid surfaces were pushed together. They then compared these displacements and the total adhesion and friction forces to calculations of the same forces using the standard "continuum theory," the model that views matter as having smeared rather than discrete atoms.
"Knowing the exact atomic structure and how each atom moved allowed us to test the two key assumptions of continuum theory," Robbins said. "While it described the internal response of solids down to nearly atomic scales, its assumption that surfaces are smooth and featureless failed badly" at the atomic level.
In a "News and Views" paper accompanying the Nature article, Jacob Israelachvili of University of California, Santa Barbara, noted that these results have fundamental implications for the limits of theories that try to "smear out" atomic structure, as well as indicating "how surfaces might be tailored in desirable ways ... if atomic-scale details are taken into consideration." This work is important because of the growing interest in nanotechnology, in which unwanted adhesion and excessive friction can cause devices to malfunction or just not to work, Robbins said. "Hopefully, this will help in the creation of new tools needed to guide the design of nanotechnology" he said.
Johns Hopkins University
The modeling showed that surfaces from a few to a thousand atoms across, with the same shape, but with different local structures, or "bumps," behave quite differently, even if those surfaces are made of the same material, Robbins said. Local stresses and adhesion forces can vary by a factor of two or more, and friction can change tenfold, he said.
The research is reported in the June 16 issue of the journal Nature by Robbins and graduate student Binquan Luan. Their findings could one day help in the successful design of nanomachines, the name given to devices built by manipulating materials on an atomic scale.
"Everyone knows that matter is made up of discrete atoms, yet most models of mechanical behavior ignore this and think of atoms as being 'smeared' into an artificial continuous medium," Robbins said. "This approach works well when describing the behavior of larger machines, but what happens when the whole machine is only a few to a thousand atoms across? The answer is crucial to the function of man-made nanomachines and many biological processes."
Robbins' and Luan examined contact between solid surfaces with "bumps" whose radii varied from about 100 to 1,000 atomic diameters. Bumps that size might be typical of nanomachine surfaces or the tips of atomic force microscopes used to measure mechanical properties at the atomic scale.
Using computer simulations, the team followed the displacements of up to 10 million atoms as the solid surfaces were pushed together. They then compared these displacements and the total adhesion and friction forces to calculations of the same forces using the standard "continuum theory," the model that views matter as having smeared rather than discrete atoms.
"Knowing the exact atomic structure and how each atom moved allowed us to test the two key assumptions of continuum theory," Robbins said. "While it described the internal response of solids down to nearly atomic scales, its assumption that surfaces are smooth and featureless failed badly" at the atomic level.
In a "News and Views" paper accompanying the Nature article, Jacob Israelachvili of University of California, Santa Barbara, noted that these results have fundamental implications for the limits of theories that try to "smear out" atomic structure, as well as indicating "how surfaces might be tailored in desirable ways ... if atomic-scale details are taken into consideration." This work is important because of the growing interest in nanotechnology, in which unwanted adhesion and excessive friction can cause devices to malfunction or just not to work, Robbins said. "Hopefully, this will help in the creation of new tools needed to guide the design of nanotechnology" he said.
Johns Hopkins University
Atomic Level Current Events and Atomic Level News RSSNational Science Foundation congratulates Nobel Laureates in medicine/physiology, chemistry and economics
The National Science Foundation (NSF) congratulates the 2009 Nobel laureates, particularly those who have received NSF funding over the years: Jack W. Szostak, who shared the prize in physiology or medicine; Thomas A. Steitz, who shared the prize in chemistry; and Elinor Ostrom and Oliver E. Williamson who earned the Sveriges Riksbank Prize in economic sciences in memory of Alfred Nobel 2009.
U-M physicists create first atomic-scale map of quantum dots
University of Michigan physicists have created the first atomic-scale maps of quantum dots, a major step toward the goal of producing "designer dots" that can be tailored for specific applications.
Building a complete metabolic model
Investigators at Burnham Institute for Medical Research (Burnham), University of California, San Diego (UC San Diego), The Scripps Research Institute (TSRI), Genomics Institute of the Novartis Research Foundation (GNF) and other institutions have constructed a complete model, including three dimensional protein structures, of the central metabolic network of the bacterium Thermotoga maritima (T. maritima).
New X-ray technique illuminates reactivity of environmental contaminants
A chemical reaction can occur in the blink of an eye.
Cement's basic molecular structure finally decoded
In the 2,000 or so years since the Roman Empire employed a naturally occurring form of cement to build a vast system of concrete aqueducts and other large edifices, researchers have analyzed the molecular structure of natural materials and created entirely new building materials such as steel, which has a well-documented crystalline structure at the atomic scale.
Researchers unite to distribute quantum keys
Researchers from across Europe have united to build the largest quantum key distribution network ever built.
Atomic physics study sets new limits on hypothetical new particles
In a forthcoming Physical Review Letters article, a group of physicists at the University of Nevada, Reno are reporting a refined analysis of experiments on violation of mirror symmetry in atoms that sets new constraints on a hypothesized particle, the extra Z-boson.
Computer hackers R.I.P. -- making quantum cryptography practical
Quantum cryptography, a completely secure means of communication, is much closer to being used practically as researchers from Toshiba and Cambridge University's Cavendish Laboratory have now developed high speed detectors capable of receiving information with much higher key rates, thereby able to receive more information faster.
Particle physics study finds new data for extra Z-bosons and potential fifth force of nature
The Large Hadron Collider is an enormous particle accelerator whose 17-mile tunnel straddles the borders of France and Switzerland. A group of physicists at the University of Nevada, Reno has analyzed data from the accelerator that could ultimately prove or disprove the possibility of a fifth force of nature.
Catching the lightwave: Nano-mechanical sensors 'wired' by photonics
As researchers push towards detection of single molecules, single electron spins and the smallest amounts of mass and movement, Yale researchers have demonstrated silicon-based nanocantilevers, smaller than the wavelength of light, that operate on photonic principles eliminating the need for electric transducers and expensive laser setups.
More Atomic Level Current Events and Atomic Level News Articles
| © 2009 BrightSurf.com |