 |
|
ORNL mirrors powerful tools for studying micro-, nano-materials
July 21, 2005OAK RIDGE, Tenn., - Precision mirrors to focus X-rays and neutron beams could speed the path to new materials and perhaps help explain why computers, cell phones and satellites go on the blink.
In the last few years, a team led by Gene Ice of the Department of Energy's Oak Ridge National Laboratory has improved by a factor of nearly 10 the performance of mirrors that enable researchers to examine variations in structure and chemistry and even individual nanoparticles. Information at this fine level is essential to understanding composition and structure of materials, and researchers continue to push the boundaries.
"There's a worldwide race to develop high-performance mirrors that will dramatically expand the capabilities of major science facilities like the Advanced Photon Source and the Spallation Neutron Source," said Ice, a member of ORNL's Metals & Ceramics Division. "We are now able to see in far greater detail the three-dimensional heterogeneous-or dissimilar - structure of materials and study internal interactions of one nanoparticle next to another."
The stage was set a few years ago when Ice and colleagues developed differentially deposited X-ray micro-focusing mirrors. When installed on a beam line at the Advanced Photon Source at Argonne National Laboratory, these mirrors allowed researchers to obtain a resolution of 500 nanometers. One nanometer is equivalent to about three atoms in width. With recent advances in the optics and manufacturing processes, the ORNL team and collaborators at Argonne have now obtained a resolution of 70 nanometers. The ultimate goal is 1 nanometer.
The advantage of using mirrors instead of other techniques is that their focal properties are nearly independent of X-ray or neutron wavelengths. This allows them to be used to perform experiments that could not be done with other methods.
Neutron beams and X-rays both provide non-destructive testing of small samples of materials and allow scientists to examine grain boundary stresses, crystalline structure and orientation of the grains that make up material. Neutron beams probe deeper into a material and are especially useful for studying magnetic materials and structures with low atomic numbers - hydrogen, helium and carbon - while X-rays can examine individual nanoparticles.
The X-ray mirrors, which are similar to ones that received an R&D 100 award in 2000, are about 20 millimeters long, or about the size of a quarter. One mirror of the two-mirror system was fabricated using a differential polishing method while the other was made by profile coating an ultra-flat substrate. Both techniques produce monolithic optics more stable and more compact than is possible with dynamically bent mirror optics.
Neutron mirrors are much bigger - about 800 millimeters (31.5 inches) long - and increase the effectiveness of small neutron beams by a factor of about 100. Fabrication methods for neutron mirrors are further along than those for X-ray mirrors, which Ice describes as a work in progress. In both cases, precision is critical. The surface profile of an X-ray mirror must be within 1/10th of a micro-radian, which, to put into perspective, is equivalent to a deviation of just 6/1,000ths of an inch over a mile, Ice said.
This research addresses a number of goals of DOE's Office of Basic Energy Sciences, which seeks a better understanding of three-dimension grain growth, deformation of polycrystals and cracks at the so-called mesoscale-materials between 1/10th of a micron to hundreds of microns. With this knowledge, researchers hope to answer questions about electrical migration in interconnects within integrated circuits. Failures at this level lead to problems with electronic equipment in everything from automobiles to satellites.
This research has attracted considerable attention from NASA and several potential industry partners, including Ford Motor Corp. and General Electric, according to Ice, who describes the response as "overwhelming."
Other ORNL researchers involved in the project are Ben Larson, John Budai and John Tischler of the Condensed Matter Sciences Division and Eliot Specht and Judy Pang of the Metals & Ceramics Division.
Oak Ridge National Laboratory is managed by UT-Battelle for the Department of Energy
Oak Ridge National Laboratory
The stage was set a few years ago when Ice and colleagues developed differentially deposited X-ray micro-focusing mirrors. When installed on a beam line at the Advanced Photon Source at Argonne National Laboratory, these mirrors allowed researchers to obtain a resolution of 500 nanometers. One nanometer is equivalent to about three atoms in width. With recent advances in the optics and manufacturing processes, the ORNL team and collaborators at Argonne have now obtained a resolution of 70 nanometers. The ultimate goal is 1 nanometer.
The advantage of using mirrors instead of other techniques is that their focal properties are nearly independent of X-ray or neutron wavelengths. This allows them to be used to perform experiments that could not be done with other methods.
Neutron beams and X-rays both provide non-destructive testing of small samples of materials and allow scientists to examine grain boundary stresses, crystalline structure and orientation of the grains that make up material. Neutron beams probe deeper into a material and are especially useful for studying magnetic materials and structures with low atomic numbers - hydrogen, helium and carbon - while X-rays can examine individual nanoparticles.
The X-ray mirrors, which are similar to ones that received an R&D 100 award in 2000, are about 20 millimeters long, or about the size of a quarter. One mirror of the two-mirror system was fabricated using a differential polishing method while the other was made by profile coating an ultra-flat substrate. Both techniques produce monolithic optics more stable and more compact than is possible with dynamically bent mirror optics.
Neutron mirrors are much bigger - about 800 millimeters (31.5 inches) long - and increase the effectiveness of small neutron beams by a factor of about 100. Fabrication methods for neutron mirrors are further along than those for X-ray mirrors, which Ice describes as a work in progress. In both cases, precision is critical. The surface profile of an X-ray mirror must be within 1/10th of a micro-radian, which, to put into perspective, is equivalent to a deviation of just 6/1,000ths of an inch over a mile, Ice said.
This research addresses a number of goals of DOE's Office of Basic Energy Sciences, which seeks a better understanding of three-dimension grain growth, deformation of polycrystals and cracks at the so-called mesoscale-materials between 1/10th of a micron to hundreds of microns. With this knowledge, researchers hope to answer questions about electrical migration in interconnects within integrated circuits. Failures at this level lead to problems with electronic equipment in everything from automobiles to satellites.
This research has attracted considerable attention from NASA and several potential industry partners, including Ford Motor Corp. and General Electric, according to Ice, who describes the response as "overwhelming."
Other ORNL researchers involved in the project are Ben Larson, John Budai and John Tischler of the Condensed Matter Sciences Division and Eliot Specht and Judy Pang of the Metals & Ceramics Division.
Oak Ridge National Laboratory is managed by UT-Battelle for the Department of Energy
Oak Ridge National Laboratory
X-rays Current Events and X-rays News RSSNASA's Swift Looks to Comets for a Cool View
NASA's Swift Gamma-ray Explorer satellite rocketed into space in 2004 on a mission to study some of the highest-energy events in the universe.
New insight into the controls on a go-to enzyme
Scientists at St. Jude Children's Research Hospital have gained new insights into regulation of one of the body's enzyme workhorses called calpains.
Study finds rise in rate of diagnostic imaging in managed care
Use of radiology imaging tests has soared in the past decade with a significant increase in newer technologies, according to a new study that is the first to track imaging patterns in a managed care setting over a substantial time period.
ESF workshop makes major advance in cancer radiotherapy
Radical improvements in outcome for many cancer sufferers are in prospect following one of the most significant advances in radiotherapy since x-rays were first used to treat a tumour in 1904.
Protein 'tubules' free avian flu virus from immune recognition
A protein found in the virulent avian influenza virus strain called H5N1 forms tiny tubules in which it "hides" the pieces of double-stranded RNA formed during viral infection, which otherwise would prompt an antiviral immune response from infected cells, said Baylor College of Medicine researchers in an online report in the journal Nature.
Just Scratching the Surface: New Technique Maps Nanomaterials as They Grow
Researchers at Rensselaer Polytechnic Institute have developed a measurement technique that will help scientists and companies map nanomaterials as they grow.
Secrets from within planets pave way for cleaner energy
Research that has provided a deeper understanding into the centre of planets could also provide the way forward in the world's quest for cleaner energy.
First gamma-ray-only pulsar observation opens new window on stellar evolution
About three times a second, a 10,000-year-old stellar corpse sweeps a beam of gamma-rays toward Earth.
NASA'S Fermi Telescope Discovers First Gamma-Ray-Only Pulsar
About three times a second, a 10,000-year-old stellar corpse sweeps a beam of gamma-rays toward Earth. Discovered by NASA's Fermi Gamma-ray Space Telescope, the object, called a pulsar, is the first one known that only "blinks" in gamma rays.
21st century detective work reveals how ancient rock got off to a hot start
A new technique using X-rays has enabled scientists to play 'detective' and solve the debate about the origins of a three billion year old rock fragment.
More X-rays Current Events and X-rays News Articles
 | X-Ray: See Through the World Around You by Nick Veasey A beautiful and utterly mesmerizing view of everyday objects. Using security scanners and x-ray machines, Nick Veasey creates beautiful, unsettling, inside-out images that reveal—like never before—the intricacy of everyday objects, animals, and plants. Whether the spectacle of an x-rayed Boeing 777, the elaborate geometry of an mp3 player’s circuit boards, or the ethereal grace of a... |
 | Jessica's X-Ray by Pat Zonta Featuring six real x-rays printed on mylar, Jessica's X-Ray is a unique and fun look inside our bodies and the world of x-rays written by a professional x-ray technologist who has worked extensively with children. In the book, kids follow Jessica, who has broken her arm, as she tours the hospital seeing x-ray rooms and looking at actual x-ray, CAT-scan, MRI and ultrasound images. These real x-ray... |
 | X-Ray: The Unauthorized Autobiography by Ray Davies This subversively brilliant rock memoir, ingeniously styled as a biography, is the work of a nameless, faceless writer hired by an Orwellian entity called "the Corporation" to capture the essence of Ray Davies, lead singer and songwriter of The Kinks and one of the greatest rock 'n' rollers of all time. Tales of London and the swinging Sixties rock scene evolve as R.D. reveals his life... |
 | Understanding X-Rays: A Plain English Approach by Mikel A. Rothenberg, MD X-rays are valuable diagnostic tools that help you visualize patient progress, document outcomes of nursing interventions, target care to specific problems, and communicate more effectively with other healthcare professionals. This reference set will help you learn to distinguish improper tube and line placement; common respiratory conditions; abdominal and respiratory foreign bodies; ARDS;... |
 | The X'ed-Out X-Ray (A to Z Mysteries) by Ron Roy X is for X-RAY . . . Dink, Josh, and Ruth Rose are having an excellent time at the Penelope Gwinn concert. But during intermission, Dink injures his arm! At the same time, the singer’s diamond necklace is stolen. Could the two mishaps somehow be connected? And could Dink’s X-ray be a clue? It’s up to the kids to examine the evidence and find out in this exciting yet easy-to-read chapter... |
 | Elements of X-Ray Diffraction (3rd Edition) by B.D. Cullity, S.R. Stock Intended to acquaint the reader with the theory of x-ray diffraction, the experimental methods involved, and the main applications. The book is a collection of principles and methods stressing X-ray diffraction rather than metallurgy. The book is written entirely in terms of the Bragg law and can be read without any knowledge of the reciprocal lattice. It is divided into three main... |
 | X-Ray Diffraction and the Identification and Analysis of Clay Minerals by Duane M. Moore, Robert C. Reynolds This successful text/reference, now in a new edition, explores the applications and limitations of data produced by the interaction of X-rays with clay minerals. This edition pays particular attention to integrating the mineralogy of soils and features a new chapter on disorder and polytypes. Chapter Four, from the first edition, has been expanded and split into two chapters, "Structure and... |
 | X-Ray Diffraction by B. E. Warren This rigorous graduate-level introduction stresses modern applications to nonstructural problems such as temperature vibration effects, order-disorder phenomena, crystal imperfections, the structure of amorphous materials, and the diffraction of x-rays in perfect crystals. Relevant problems at chapter ends. Six Appendixes (including tables of values). 146 illustrations.... |
 | Looking Within: How X-Ray, CT, MRI, Ultrasound, and Other Medical Images Are Created, and How They Help Physicians Save Lives by Anthony Brinton Wolbarst A hundred years ago, a doctor had no way to look within the body of a patient other than to slice it open. That changed radically at the turn of the century, with the discovery of X-rays. X-ray and other forms of diagnostic imaging technology developed slowly but steadily from then until the 1970s, at which point a revolution occurred. Made possible largely by the availability of powerful but... |
 | A Practical Guide for the Preparation of Specimens for X-Ray Fluorescence and X-Ray Diffraction Analysis The first hands-on guide to XRD and XRF sampling and specimen preparation Systematic errors from poor sampling and improper specimen preparation can easily render X-ray diffraction (XRD) and X-ray fluorescence (XRF) data of questionable use for analysis. But, until now, the practical information that can help to reduce these errors has never been readily available in one volume. ... |
| © 2008 BrightSurf.com |