 |
|
Repeatable low-breakdown voltage antifuses enabled through a Sandia-developed dielectric thin film
May 16, 2006ALBUQUERQUE, N.M.-Researchers at Sandia National Laboratories have developed an inexpensive, reliable and easy-to-manufacture class of dielectric films that have the capability of enabling programmable antifuses on integrated circuits (IC) at less cost and using easier-to-manufacture methods.
The new Sandia films enable single-mask level sub 5 Volt write antifuses that are compatible with leading-edge IC specifications.
Antifuses are nonvolatile, one-time programmable memories fabricated on ICs that are programmed with applied voltage. People who need specially designed chips that are generally not available can use inexpensive chips made with the Sandia-developed dielectric film and permanently program them after fabrication. This technology inexpensively enables such activities as post fabrication trimming, ROM programming, on-chip serial number identification, and data and program security. Chips with antifuse devices may also be used in high radiation environments or for long-term storage where flash memory would not be reliable.
"Antifuses have been around a long time," says Paul Smith, who is involved in technology transfer at Sandia. "The new Sandia-developed film-that ultimately is incorporated into computer chips with antifuses-requires lower voltage and less real estate. This makes them more desirable than existing antifuses."
Smith hopes to attract outside companies to be Sandia partners who would commercialize the new film technology.
Sandia is a Department of Energy (DOE) National Nuclear Security Administration laboratory.
Current antifuse technologies rely on complex stacks of ultra-thin films that are foreign to standard Complimentary Metal Oxide Semiconductor (CMOS) processes. These existing multi-stack solutions use write voltages significantly greater than 5 Volts, making existing antifuses incompatible with many leading-edge IC designs. The depositions of these films can also be difficult to control during production, resulting in a potential for poor yield and reliability issues.
"In addition to compatibility with state-of-the-art ICs, Sandia's novel antifuse technology offers great flexibility toward where the antifuse can be placed in an IC," says Scott Habermehl, one of the inventors of the dielectric film. "It can readily be integrated into either the front end or the back end wiring." He adds that the new dielectric technology enhances both process margin and device reliability since it allows manufacturers to use thicker films for the antifuse elements.
Sandia's dielectric technology leverages existing fabrication equipment and infrastructure without the need for costly, specialized and dedicated tooling and facilities. The dielectric films were developed by Sandia researchers Scott Habermehl, Roger Apodaca and David Stein.
DOE/Sandia National Laboratories
"Antifuses have been around a long time," says Paul Smith, who is involved in technology transfer at Sandia. "The new Sandia-developed film-that ultimately is incorporated into computer chips with antifuses-requires lower voltage and less real estate. This makes them more desirable than existing antifuses."
Smith hopes to attract outside companies to be Sandia partners who would commercialize the new film technology.
Sandia is a Department of Energy (DOE) National Nuclear Security Administration laboratory.
Current antifuse technologies rely on complex stacks of ultra-thin films that are foreign to standard Complimentary Metal Oxide Semiconductor (CMOS) processes. These existing multi-stack solutions use write voltages significantly greater than 5 Volts, making existing antifuses incompatible with many leading-edge IC designs. The depositions of these films can also be difficult to control during production, resulting in a potential for poor yield and reliability issues.
"In addition to compatibility with state-of-the-art ICs, Sandia's novel antifuse technology offers great flexibility toward where the antifuse can be placed in an IC," says Scott Habermehl, one of the inventors of the dielectric film. "It can readily be integrated into either the front end or the back end wiring." He adds that the new dielectric technology enhances both process margin and device reliability since it allows manufacturers to use thicker films for the antifuse elements.
Sandia's dielectric technology leverages existing fabrication equipment and infrastructure without the need for costly, specialized and dedicated tooling and facilities. The dielectric films were developed by Sandia researchers Scott Habermehl, Roger Apodaca and David Stein.
DOE/Sandia National Laboratories
More Dielectric Film Current Events and Dielectric Film News Articles
 |
Thin Films on Glass (Schott Series on Glass and Glass Ceramics) by Hans Bach (Editor), Dieter Krause (Editor) Thin Films on Glass describes the development of active and passive thin films on glass at Schott. Design strategies, the use of conventional and newly developed production technologies, and the application of characterization methods for the structure of thin films and their properties are reported. The book is written by Schott experts and illustrates how the best film materials and deposition and processing parameters may be selected. The topics covered include flip-flop layers, wave-guiding films, Rugate filters and gradient devices, optical transducers, coatings, and mirrors. |
 |
Dielectric Films for Advanced Microelectronics (Wiley Series in Materials for Electronic & Optoelectronic Applications) by Mikhail Baklanov (Editor), Karen Maex (Editor), Martin Green (Editor) The topic of thin films is an area of increasing importance in materials science, electrical engineering and applied solid state physics; with both research and industrial applications in microelectronics, computer manufacturing, and physical devices. Advanced, high-performance computers, high-definition TV, broadband imaging systems, flat-panel displays, robotic systems, and medical electronics and diagnostics are a few examples of the miniaturized device technologies that depend on the utilization of thin film materials. This book presents an in-depth overview of the novel developments made by the scientific leaders in the area of modern dielectric films for advanced microelectronic applications. It contains clear, concise explanations of material science of dielectric films... |
|
Structure and Electronic Properties of Ultrathin Dielectric Films on Silicon and Related Structures (Materials Research Society Symposia Proceedings, V. 592.) by D. A. Buchanan (Editor) | |
|
Proceedings of the Symposium on Silicon Nitride Thin Insulating Films (Dielectrics and Insulation and Electronics Divisions Proceedings, Volume 83-8) b | |
 |
IEC 60384-20 Ed. 1.0 b:1996, Fixed capacitors for use in electronic equipment - Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric chip d.c. capacitors by IEC TC/SC 40 (Author) |
 |
IEC 60384-17 Ed. 2.0 en:2005, Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors by IEC TC/SC 40 (Author) applies to fixed capacitors with metallized electrodes and polypropylene dielectric for use in electronic equipment. Capacitors which have mixed foil and metallized electrodes are also within the scope of this standard. These capacitors may have "self-healing" properties depending on conditions of use. Capacitors covered by this specification are mainly intended for use with alternating voltage and/or for pulse applications. The maximum reactive power applicable is 10 000 var and the maximum peak voltage is 3 000 V. |
 |
IEC 60384-2 Ed. 3.0 en:2005, Fixed capacitors for use in electronic equipment - Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors by IEC TC/SC 40 (Author) applies to fixed capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors may have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. |
 |
IEC 60384-11 Ed. 2.0 b:1988, Fixed capacitors for use in electronic equipment. Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors by IEC TC/SC 40 (Author) Applies to fixed direct current capacitors, for rated voltages not exceeding 6 300 V, using as dielectric a polyethylene-terephthalate film and electrodes of thin metal foils and intended for use in electronic equipment. Prescribes preferred ratings and characteristics, selects from IEC 60384-1 (1982) the appropriate quality assessment procedures, tests and measuring methods and gives general performance requirements for this type of capacitor. Replaces IEC 60202. |
 |
IEC 60384-12-1 Ed. 1.0 b:1988, Fixed capacitors for use in electronic equipment. Part 12: Blank detail specification: Fixed polycarbonate film dielectric metal foil d.c. capacitors. Assessment level E by IEC TC/SC 40 (Author) Supplementary document to the sectional specification which contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. |
|
Low and High Dielectric Constant Materials: Materials Science, Processing, and Reliability Issues and Thin Film Materials for Advanced Packaging Technologies ... (Electrochemical Society), V. 99-7.) by Rajendra Singh (Editor), Electrochemical Society. Dielectric Science and Technology Division (Editor), Electrochemical Society Electronics Division (Editor) |
| © 2009 BrightSurf.com |