 |
|
Researchers achieve long-sought goal of using lasers to break specific molecular bonds
May 19, 2006Stripping hydrogen from silicon surfaces with light instead of heat promises to improve the quality of computer chips and solar cells
A team of researchers has achieved a long-sought scientific goal: using laser light to break specific molecular bonds. The process uses laser light, instead of heat, to strip hydrogen atoms from silicon surfaces. This is a key step in the manufacture of computer chips and solar cells, so the achievement could reduce the cost and improve the quality of a wide variety of semiconductor devices.
The technique was developed by Philip I. Cohen at the University of Minnesota, working with Vanderbilt researchers Leonard C. Feldman, Norman Tolk and Zhiheng Liu along with Zhenyu Zhang from Oak Ridge National Laboratory. It is described in the May 19 issue of the journal Science.
"We live in the silicon age," observes Tolk, who is a physics professor at Vanderbilt. "The fact that we have figured out how to remove hydrogen with a laser raises the possibility that we will be able to grow silicon devices at very low temperatures, close to room temperature."
Microelectronic devices are built from multiple layers of silicon. In order to keep silicon surfaces from oxidizing, semiconductor manufacturers routinely expose them to hydrogen atoms that attach to all the available silicon bonds. However, this process known as "passivation" means that the hydrogen atoms must be removed before new layers of silicon can be added. "Desorbing" the hydrogen thermally requires high temperatures and adds substantially to difficulty of process control because these temperatures create thermal defects in the chips and so reduce chip yields.
"One application that we intend to examine is the use of this technique to manufacture field effect transistors (FETs) that operate at speeds about 40 percent faster than ordinary transistors," says Cohen. According to the professor of electrical and computer engineering, it should be possible to reduce the processing temperature of manufacturing FETs by 100 degrees Celsius which should dramatically improve yields.
The University of Minnesota is filing a patent on the application of the laser desorption method to silicon processing.
In addition to a wide range of potential applications, the discovery has important scientific implications. Since the invention of the infrared laser, chemists have been trying to use it to drive chemical reactions along non-thermal pathways. But, as Yale chemist John C. Tully remarks in an accompanying commentary in Science, "molecules have not cooperated." When a molecule is heated up, the weakest bond breaks first. Attempts to tune lasers to break stronger bonds have been repeatedly thwarted by the rapidity with which molecules convert the light energy into thermal energy. Describing the new findings as a "striking contrast" to previous studies, Tully observes that the researchers have "successfully accomplished a long-standing goal."
The research was carried out at Vanderbilt's W. M. Keck Free-electron Laser Center. The free-electron laser is a special kind of laser which has the advantage that its beam can be tuned through a wide range of frequencies in much the same way that you can dial up different frequencies on a radio. Most lasers only produce light in a few distinct frequencies. The Vanderbilt FEL operates in the infrared portion of the spectrum, which is particularly valuable for probing the structure and behavior of materials. This allowed the researchers to use laser light tuned to the frequency at which the hydrogen-silicon bonds vibrate and polarized so that the photon's electrical field is pointed in the same direction as the silicon-hydrogen bonds.
In addition to applying this basic system to silicon surfaces covered only with hydrogen, they also tested it on surfaces covered with a mixture of hydrogen and its isotope deuterium. The researchers found that the technique can remove hydrogen atoms while leaving the deuterium atoms intact.
This degree of selectivity could provide a way to control the growth of nanoscale structures with an unprecedented degree of precision and it is this potential that most excites Cohen, who notes, "By selectively removing the hydrogen atoms from the ends of nanowires, we should be able to control and direct their growth, which currently is a random process."
Feldman, the Stevenson Professor of Physics at Vanderbilt, maintains that the process represents a significant advance in the ability to modify the surfaces of materials at the atomic level. "We have a new way to selectively interrogate and modify surfaces. If you stop to think about it, surfaces are where the action is. It is where the rubber meets the road! So, not only will this new technique allow us to create innovative new devices, it will also provide us with invaluable new knowledge about vital surface processes. In fact, some of the most advanced nanotechnology devices that have been envisioned, like quantum computers, require the level of control that atom-specific processes of this sort make possible."
Vanderbilt University
Microelectronic devices are built from multiple layers of silicon. In order to keep silicon surfaces from oxidizing, semiconductor manufacturers routinely expose them to hydrogen atoms that attach to all the available silicon bonds. However, this process known as "passivation" means that the hydrogen atoms must be removed before new layers of silicon can be added. "Desorbing" the hydrogen thermally requires high temperatures and adds substantially to difficulty of process control because these temperatures create thermal defects in the chips and so reduce chip yields.
"One application that we intend to examine is the use of this technique to manufacture field effect transistors (FETs) that operate at speeds about 40 percent faster than ordinary transistors," says Cohen. According to the professor of electrical and computer engineering, it should be possible to reduce the processing temperature of manufacturing FETs by 100 degrees Celsius which should dramatically improve yields.
The University of Minnesota is filing a patent on the application of the laser desorption method to silicon processing.
In addition to a wide range of potential applications, the discovery has important scientific implications. Since the invention of the infrared laser, chemists have been trying to use it to drive chemical reactions along non-thermal pathways. But, as Yale chemist John C. Tully remarks in an accompanying commentary in Science, "molecules have not cooperated." When a molecule is heated up, the weakest bond breaks first. Attempts to tune lasers to break stronger bonds have been repeatedly thwarted by the rapidity with which molecules convert the light energy into thermal energy. Describing the new findings as a "striking contrast" to previous studies, Tully observes that the researchers have "successfully accomplished a long-standing goal."
The research was carried out at Vanderbilt's W. M. Keck Free-electron Laser Center. The free-electron laser is a special kind of laser which has the advantage that its beam can be tuned through a wide range of frequencies in much the same way that you can dial up different frequencies on a radio. Most lasers only produce light in a few distinct frequencies. The Vanderbilt FEL operates in the infrared portion of the spectrum, which is particularly valuable for probing the structure and behavior of materials. This allowed the researchers to use laser light tuned to the frequency at which the hydrogen-silicon bonds vibrate and polarized so that the photon's electrical field is pointed in the same direction as the silicon-hydrogen bonds.
In addition to applying this basic system to silicon surfaces covered only with hydrogen, they also tested it on surfaces covered with a mixture of hydrogen and its isotope deuterium. The researchers found that the technique can remove hydrogen atoms while leaving the deuterium atoms intact.
This degree of selectivity could provide a way to control the growth of nanoscale structures with an unprecedented degree of precision and it is this potential that most excites Cohen, who notes, "By selectively removing the hydrogen atoms from the ends of nanowires, we should be able to control and direct their growth, which currently is a random process."
Feldman, the Stevenson Professor of Physics at Vanderbilt, maintains that the process represents a significant advance in the ability to modify the surfaces of materials at the atomic level. "We have a new way to selectively interrogate and modify surfaces. If you stop to think about it, surfaces are where the action is. It is where the rubber meets the road! So, not only will this new technique allow us to create innovative new devices, it will also provide us with invaluable new knowledge about vital surface processes. In fact, some of the most advanced nanotechnology devices that have been envisioned, like quantum computers, require the level of control that atom-specific processes of this sort make possible."
Vanderbilt University
Molecular Bonds Current Events and Molecular Bonds News RSSMicroscopic manufacturers produce eco-friendly plastics
Last year's energy crisis highlighted an unforseen by-product of the looming fuel shortages of the 21st century. Petroleum-based products such as plastics that society takes for granted but now requires to function will run out with the oil.
Strategy Discovered for Fighting Persistent Bacterial Infections
Researchers at National Jewish Health have discovered a promising strategy for destroying the molecular scaffolding that can make Pseudomonas bacterial infections extremely difficult to treat in cystic fibrosis patients, wearers of contact lenses, and burn victims. Jerry Nick, MD, Associate Professor of Medicine at National Jewish Health, and his colleagues report in the April 2009 issue of The Journal of Medical Microbiology that a long string of aspartic acid molecules disrupts the molecular bonds that hold together the structure supporting Pseudomonas biofilms.
Putting the squeeze on nitrogen for high energy materials
Nitrogen atoms like to travel in pairs, hooked together by one of the strongest chemical bonds in nature. By subjecting nitrogen molecules to extreme temperatures and pressures scientists are getting a new understanding of not only nitrogen but other similar molecules, including hydrogen.
Electronic structure of DNA revealed for 1st time by Hebrew University and collaborating researchers
Utilizing a technique that combines low temperature measurements and theoretical calculations, Hebrew University of Jerusalem scientists and others have revealed for the first time the electronic structure of single DNA molecules.
The original nanoworkout -- Helping carbon nanotubes get into shape
Researchers at Rensselaer Polytechnic Institute have developed a new method of compacting carbon nanotubes into dense bundles.
Inexpensive 'nanoglue' can bond nearly anything together
Researchers at Rensselaer Polytechnic Institute have developed a new method to bond materials that don't normally stick together. The team's adhesive, which is based on self-assembling nanoscale chains, could impact everything from next-generation computer chip manufacturing to energy production.
Research could lead to treatment for Alzheimer's disease
A molecule designed by a Purdue University researcher could lead to the first drug treatment for Alzheimer's disease.
UCLA engineers set new world record in generation of high-frequency submillimeter waves
Researchers at the UCLA Henry Samueli School of Engineering and Applied Science have achieved a new world record in high-frequency submillimeter waves.
MIT materials scientists tame tricky carbon nanotubes
Based on a new theory, MIT scientists may be able to manipulate carbon nanotubes - one of the strongest known materials and one of the trickiest to work with - without destroying their extraordinary electrical properties.
Iowa State researchers convert farm waste to bio-oil
Samy Sadaka reached into a garbage bag, picked up a mixture of cow manure and corn stalks, let it run through his fingers and invited a visitor to do the same.
More Molecular Bonds Current Events and Molecular Bonds News Articles
 |
Atomic Charges, Bond Properties, and Molecular Energies by Sandor Fliszar (Author) The first book to cover conceptual quantum chemistry, Atomic Charges, Bond Properties, and Molecular Energies deftly explores chemical bonds, their intrinsic energies, and the corresponding dissociation energies, which are relevant in reactivity problems. This unique first-hand, self-contained presentation develops relatively uncomplicated but physically meaningful approaches to molecular properties by providing derivations of all the required formulas from scratch, developed in Professor Fliszar's laboratory. This book is vitally relevant to organic- and biochemists, molecular biologists, materials scientists, and nanoscientists. |
 |
Design-Your-Own Custom Molecular Model Kit; Contains 490 Atoms Plus 300 Bonds by Lab-Aids Model, Molecular; Contains 490 atoms plus 300 bonds to design your own |
|
Handbook of molecular dimensions: X-ray bond angles and lengths (Physical methods in heterocyclic chemistry / edited by A.R. Katritzky) by P. J Wheatley (Author) | |
 |
Individual DNA and Molecular Model Kit by Carolina Biological Supply Company For one student. Kit contains over 150 plastic, color-coded pieces representing nitrogenous bases (A, T, G, C), hydrogen bonds (flexible), phosphates, and sugars needed to construct a model of a short DNA segment with 8 base pairs. Also included are atoms of carbon, oxygen, nitrogen, hydrogen, and phosphorus, with the covalent bonding pieces needed to construct a DNA or RNA nucleotide. Models are easy to assemble and disassemble; all components are reusable. Includes a student instruction manual. |
|
Chemical Bonds: An Introduction to Atomic and Molecular Structure by Harry B. Gray (Author) This profusely illustrated book by a world-renowned chemist and award-winning chemistry teacher provides a complete introduction to atomic and molecular structure and bonding for science students. Parts of the book are revised and expanded versions of sections from Basic Principles of Chemistry by Gray and Haight, Jr. | |
|
Molecular Geometry: An entry from Macmillan Reference USA's Chemistry: Foundations and Applications by Mark Freilich (Author) This digital document is an article from Chemistry: Foundations and Applications, brought to you by Gale®, a part of Cengage Learning, a world leader in e-research and educational publishing for libraries, schools and businesses. The length of the article is 1930 words. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser. “Chemistry: Foundations and Application” is an accessible four-volume set that covers chemistry’s laws, processes, applications and sub-disciplines, reviews the history of the field, including modern research and practical applications, and includes biographies of scientists past and present. Varied topics that examine and explain chemistry's many... | |
|
Molecular geometry: An entry from Thomson Gale's Gale Encyclopedia of Science, 3rd ed. by K. Lee Lerner (Author) The “Gale Encyclopedia of Science” is written at a level somewhere between the introductory sources and the highly technical texts currently available. This six-volume set covers all major areas of science and engineering, as well as mathematics and the medical and health sciences, while providing a comprehensive overview of current scientific knowledge and technology. Alphabetically arranged entries provide a user-friendly format that makes the broad scope of information easy to access and decipher. Entries typically describe scientific concepts, provide overviews of scientific areas and, in some cases, define terms. | |
|
The Metallic Bond and the Structure of Metals by V. K. Grigorovich (Editor) The classical concept of the interaction of collectivised almost free valent electrons with the periodic field of a crystalline lattice forms the basis of the zone theory of metals. However, the successful development of this theory has not yet resulted in the solution of the problems of the origin of the actual alloys and compounds which have been produced experimentally by diffraction methods. This is one surprising difference between metal physics and quantum chemistry, where the structure of molecules is deduced from first principles -- the electron structure of the atoms and wave functions -- by applying chemical bond theory and the methods of valent bonds and molecular orbits. This book develops the concept of the metallic bond, uniting the ideas from metal physics concerning the... | |
 |
Replacement Bond Set; For Use with Basic or Advanced Molecular Model Sets by Christensen Educational Materials Molecular Model, Replacement bonds; Visualize the three-dimensional nature of a molecule; Use with the basic or advanced set; Includes thirty 1.25 in. wooden pegs, ten 2 in. wooden pegs, and ten 2 in. springs |
|
Structure of Molecules and the Chemical Bond by Y.K. Syrkin (Author), M.E. Dyatkina (Author) |
| © 2009 BrightSurf.com |