 |
|
Scientists Image 'Magnetic Semiconductors' On The Nanoscale
July 27, 2006In a first-of-its-kind achievement, scientists at the University of Iowa, the University of Illinois at Urbana-Champaign and Princeton University have directly imaged the magnetic interactions between two magnetic atoms less than one nanometer apart (one billionth of a meter) and embedded in a semiconductor chip.
The findings, scheduled for publication as the cover story of the July 27 issue of the journal Nature, bring scientists one step closer toward realizing the goal of building a very advanced semiconductor computer chip. The chip would be based upon a property of the electron called "spin" and the related technology of "spintronics," according to Michael Flatté, professor in the UI College of Liberal Arts and Sciences Department of Physics and Astronomy and leader of the UI research group.
"With spintronics, data manipulation and long-term storage can be conducted in one computer chip, rather than separately in a CPU and a hard drive as currently practiced. The data manipulation could also be done quicker and require less power. Such a computer would be much smaller in size and use less energy," Flatté says.
He adds that some 20 years ago, researchers at IBM discovered that an ordinary semiconducting material, indium arsenide, could be made magnetic at low temperatures by introducing a very small number of magnetic atoms. The magnetic atoms they added were manganese, and soon many other "magnetic semiconductors" were discovered. Gallium arsenide, a semiconductor material used for high-performance devices in cell phones, becomes magnetic when manganese is added, but only at a temperature of -88 C (-126 F). In order for it to be used in future computer chips, magnetic semiconductors like gallium manganese arsenide must remain magnetic at higher temperatures and also be made "cleaner," or less resistant to current flow.
"Visualizing the magnetic interactions on the nanoscale may lead to better magnetic semiconductor materials and applications for them in the electronics industry," says Flatté, who along with UI Assistant Research Scientist Jian-Ming Tang predicted that the magnetic interactions could be imaged with a scanning tunneling microscope. "An electron behaves as if it carries a small magnet around with it. This property, called "spin," has not been used in computer chips to date. If the materials are good enough, then new computer chips that require much less power to run are possible. Even revolutionary 'quantum computers' that use strange quantum phenomena of the atomic world to perform calculations may be possible," says Flatté.
Flatté and Tang had predicted that the magnetic interactions should depend strongly on where in the crystal lattice of the semiconductor the atoms were sitting. Some configurations interacted very strongly and others very weakly. "We thought it would require a lot of luck to see this effect. Usually when manganese is placed in gallium arsenide, it enters the lattice in many different positions. To see two manganese atoms within a nanometer of each other, but isolated from all other manganese, would be statistically very unlikely," he says.
Flatté notes that the team took a completely different approach toward seeing the magnetic interactions. Instead of trusting luck to help them find an arrangement of atoms, they placed the manganese atoms one at a time into a fresh, clean piece of gallium arsenide. "Using the tip of a scanning tunneling microscope, we can take out a single atom from the base material and replace it with a single metal that gives the semiconductor its magnetic properties," says Ali Yazdani, Princeton University physics professor and article co-author. He notes that the effort marks the first time that scientists have achieved this degree of control over the atomic-level structure of a semiconductor. In essence, the team used this unique capability to make a semiconductor magnetic, one atom at a time. "The ability to tailor semiconductors on the atomic scale is the holy grail of electronics, and this method may be the approach that is needed," says Yazdani.
Dale Kitchen, a researcher in Yazdani's lab, hit upon the solution while working with a high-tech tool used to explore complex materials called a scanning tunneling microscope, a device that operates very differently from a desktop optical microscope. The device has a finely-pointed electrical probe that passes over a surface in order to detect variations with a weak electric field. The team, however, found that the charged tip could also be used to eject a single gallium atom from the surface, replacing it with one of manganese that was waiting nearby.
By incorporating manganese atoms into the gallium arsenide semiconductor, the team has created an atomic-scale laboratory that can reveal what researchers have sought for decades: the precise interactions among atoms and electrons in chip materials. The team used their new technique to find the optimal arrangements for manganese atoms that enhance the magnetic properties of gallium manganese arsenide. These arrangements agreed with Flatté and Tang's predictions. "To predict how a material will behave, and then have that prediction dramatically confirmed, as in this experiment, is one of the most enjoyable experiences of research," says Flatté.
Flatté cautions that further advances will be required to translate the new research results into new chip technology and also that using a scanning tunneling microscope to grow large pieces of high quality gallium manganese arsenide may not be practical. However, he says, the lessons learned about optimal arrangements of magnetic atoms in semiconductors will be transferred to other semiconductor growth techniques and to other magnetic semiconductor materials.
The research project was funded in part by the National Science Foundation and the U.S. Army Research Office.
University of Iowa
He adds that some 20 years ago, researchers at IBM discovered that an ordinary semiconducting material, indium arsenide, could be made magnetic at low temperatures by introducing a very small number of magnetic atoms. The magnetic atoms they added were manganese, and soon many other "magnetic semiconductors" were discovered. Gallium arsenide, a semiconductor material used for high-performance devices in cell phones, becomes magnetic when manganese is added, but only at a temperature of -88 C (-126 F). In order for it to be used in future computer chips, magnetic semiconductors like gallium manganese arsenide must remain magnetic at higher temperatures and also be made "cleaner," or less resistant to current flow.
"Visualizing the magnetic interactions on the nanoscale may lead to better magnetic semiconductor materials and applications for them in the electronics industry," says Flatté, who along with UI Assistant Research Scientist Jian-Ming Tang predicted that the magnetic interactions could be imaged with a scanning tunneling microscope. "An electron behaves as if it carries a small magnet around with it. This property, called "spin," has not been used in computer chips to date. If the materials are good enough, then new computer chips that require much less power to run are possible. Even revolutionary 'quantum computers' that use strange quantum phenomena of the atomic world to perform calculations may be possible," says Flatté.
Flatté and Tang had predicted that the magnetic interactions should depend strongly on where in the crystal lattice of the semiconductor the atoms were sitting. Some configurations interacted very strongly and others very weakly. "We thought it would require a lot of luck to see this effect. Usually when manganese is placed in gallium arsenide, it enters the lattice in many different positions. To see two manganese atoms within a nanometer of each other, but isolated from all other manganese, would be statistically very unlikely," he says.
Flatté notes that the team took a completely different approach toward seeing the magnetic interactions. Instead of trusting luck to help them find an arrangement of atoms, they placed the manganese atoms one at a time into a fresh, clean piece of gallium arsenide. "Using the tip of a scanning tunneling microscope, we can take out a single atom from the base material and replace it with a single metal that gives the semiconductor its magnetic properties," says Ali Yazdani, Princeton University physics professor and article co-author. He notes that the effort marks the first time that scientists have achieved this degree of control over the atomic-level structure of a semiconductor. In essence, the team used this unique capability to make a semiconductor magnetic, one atom at a time. "The ability to tailor semiconductors on the atomic scale is the holy grail of electronics, and this method may be the approach that is needed," says Yazdani.
Dale Kitchen, a researcher in Yazdani's lab, hit upon the solution while working with a high-tech tool used to explore complex materials called a scanning tunneling microscope, a device that operates very differently from a desktop optical microscope. The device has a finely-pointed electrical probe that passes over a surface in order to detect variations with a weak electric field. The team, however, found that the charged tip could also be used to eject a single gallium atom from the surface, replacing it with one of manganese that was waiting nearby.
By incorporating manganese atoms into the gallium arsenide semiconductor, the team has created an atomic-scale laboratory that can reveal what researchers have sought for decades: the precise interactions among atoms and electrons in chip materials. The team used their new technique to find the optimal arrangements for manganese atoms that enhance the magnetic properties of gallium manganese arsenide. These arrangements agreed with Flatté and Tang's predictions. "To predict how a material will behave, and then have that prediction dramatically confirmed, as in this experiment, is one of the most enjoyable experiences of research," says Flatté.
Flatté cautions that further advances will be required to translate the new research results into new chip technology and also that using a scanning tunneling microscope to grow large pieces of high quality gallium manganese arsenide may not be practical. However, he says, the lessons learned about optimal arrangements of magnetic atoms in semiconductors will be transferred to other semiconductor growth techniques and to other magnetic semiconductor materials.
The research project was funded in part by the National Science Foundation and the U.S. Army Research Office.
University of Iowa
Semiconductor Current Events and Semiconductor News RSSLight twists rigid structures in unexpected nanotech finding
In findings that took the experimenters three years to believe, University of Michigan engineers and their collaborators have demonstrated that light itself can twist ribbons of nanoparticles.
Layered graphene sheets could solve hydrogen storage issues
Graphene-carbon formed into sheets a single atom thick-now appears to be a promising base material for capturing hydrogen, according to recent research at the National Institute of Standards and Technology (NIST) and the University of Pennsylvania.
MIT researchers discover new way of producing electricity
A team of scientists at MIT have discovered a previously unknown phenomenon that can cause powerful waves of energy to shoot through minuscule wires known as carbon nanotubes.
Trapping Sunlight with Silicon Nanowires
Solar cells made from silicon are projected to be a prominent factor in future renewable green energy equations, but so far the promise has far exceeded the reality.
Rice researchers make graphene hybrid
Rice University researchers have found a way to stitch graphene and hexagonal boron nitride (h-BN) into a two-dimensional quilt that offers new paths of exploration for materials scientists.
Caltech researchers create highly absorbing, flexible solar cells with silicon wire arrays
Using arrays of long, thin silicon wires embedded in a polymer substrate, a team of scientists from the California Institute of Technology (Caltech) has created a new type of flexible solar cell that enhances the absorption of sunlight and efficiently converts its photons into electrons.
Single-step technique produces both p-type and n-type doping for future graphene devices
A simple one-step process that produces both n-type and p-type doping of large-area graphene surfaces could facilitate use of the promising material for future electronic devices.
First germanium laser
New results from MIT's Electronic Materials Research Group bring us closer to computers that use light instead of electricity to move data.
New simulation tool could shorten manufacturing design process
Novel research on improving the simulation performance of hardware models created in a language called SystemC, often used to shorten manufacturing design cycles to improve the time it takes to bring a product to the marketplace, has garnered a best paper award at the 15th Asia and South Pacific Design Automation Conference (ASP-DAC) for a team led by Sandeep Shukla, Virginia Tech associate professor of electrical and computer engineering (ECE), and three of his students.
Mismatched alloys are a good match for thermoelectrics
Employing some of the world's most powerful supercomputers, scientists at Lawrence Berkeley National Laboratory have shown that mismatched alloys are a good match for the future development of high performance thermoelectric devices.
More Semiconductor Current Events and Semiconductor News Articles
 |
The Essential Guide to Semiconductors by Jim Turley (Author) Semiconductors are the building blocks of computing. They are the electronic chips that are in every computer and device on the market. Cellphones, cars, computers (of all kinds), gaming systems, machines - anything with hardware has an electronic (or semiconductor) component. This is the professional's guide to the business and technology of semiconductor design and manufacturing. The semiconductor industry lends itself very well to a book of this kind. Just as the telecommunications area, the semiconductor industry is broad and complicated. There's a definite need for a book that explains the in's and out's of the technology and how it works - without bogging down readers with too much technical content. |
 |
Semiconductor Device Fundamentals by Robert F. Pierret (Author) Introduces and explains the basic terminology, models, properties, and concepts associated with semiconductors and semiconductor devices. Systematically develops the analytical tools needed to solve practical device problems. DLC: Semiconductors. |
 |
Physics of Semiconductor Devices by Simon M. Sze (Author), Kwok K. Ng (Author) The Third Edition of the standard textbook and reference in the field of semiconductor devices This classic book has set the standard for advanced study and reference in the semiconductor device field. Now completely updated and reorganized to reflect the tremendous advances in device concepts and performance, this Third Edition remains the most detailed and exhaustive single source of information on the most important semiconductor devices. It gives readers immediate access to detailed descriptions of the underlying physics and performance characteristics of all major bipolar, field-effect, microwave, photonic, and sensor devices. Designed for graduate textbook adoptions and reference needs, this new edition includes: A complete update of the latest... |
 |
Handbook of Semiconductor Manufacturing Technology, Second Edition by Yoshio Nishi (Editor), Robert Doering (Editor) Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on… Silicon-on-insulator (SOI) materials and... |
 |
Semiconductor Material and Device Characterization by Dieter K. Schroder (Author) This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques.... |
 |
Semiconductor Manufacturing Technology by Michael Quirk (Author), Julian Serda (Author) For the introductory course in Semiconductor Manufacturing Technology. This text introduces the terminology, concepts, processes, products, and equipment commonly used in the manufacture of ultra-large-scale integrated (ULSI) semiconductors. The book provides helpful, up-to-date technical information about semiconductor manufacturing and strikes an effective balance between the process and equipment technology found in wafer fabrications. |
 |
The Story of Semiconductors by John W. Orton (Author) The book provides an overview of the fascinating spectrum of semiconductor physics, devices and applications, presented from a historical perspective. It covers the development of the subject from its inception in the early nineteenth century to the recent millennium. Written in a lively, informal style, it emphasizes the interaction between pure scientific push and commercial pull, on the one hand, and between basic physics, materials, and devices, on the other. It also sets the various device developments in the context of systems requirements and explains how such developments met wide-ranging consumer demands. It is written so as to appeal to students at all levels in physics, electrical engineering, and materials science, to teachers, lecturers, and professionals working in the... |
 |
Semiconductor Devices: Physics and Technology, 2nd Edition by Simon M. Sze (Author) This book is an introduction to the physical principles of modern semiconductor devices and their advanced fabrication technology. It begins with a brief historical review of major devices and key technologies and is then divided into three sections: semiconductor material properties, physics of semiconductor devices and processing technology to fabricate these semiconductor devices. |
 |
Worlds in Flux Starring: Semiconductor |
|
Semiconductor Business Information Service by Reed Electronics Research |
| © 2010 BrightSurf.com |