 |
|
Researchers mimic lotus leaves for self-cleaning PV arrays, non-stick MEMS
October 16, 2006Researchers at the Georgia Institute of Technology are mimicking one of Nature's best non-stick surfaces to help create more reliable electric transmission systems, photovoltaic arrays that retain their efficiency, MEMS structures unaffected by water and improved biocompatible surfaces able to prevent cells from adhering to implanted medical devices.
Based on a collaboration of materials scientists and chemical engineers, the research aims to duplicate the self-cleaning surfaces of the lotus plant, which grows in waterways of Asia. Despite growing in muddy conditions, the leaves and flowers remain clean because their surfaces are composed of micron- and nano-scale structures that - along with a waxy coating - prevent dirt and water from adhering. Despite their unusual surface properties, the rough surfaces allow photosynthesis to continue in the leaves.
"When rain hits the leaves of the lotus plant, it simply beads up," noted C.P. Wong, a Regents Professor in Georgia Tech's School of Materials Science and Engineering. "When the leaves are also tilted at a small angle, the beads of water run off instantaneously. While the water is rolling off, it carries away any dirt on the surface."
The self-cleaning action of the lotus plant has intrigued researchers for decades, and recent studies done by researchers in several different groups have demonstrated the reasons behind the plant's unique abilities.
The plant's ability to repel water and dirt results from an unusual combination of a superhydrophobic (water-repelling) surface and a combination of micron-scale hills and valleys and nanometer-scale waxy bumps that create rough surfaces that don't give water or dirt a chance to adhere.
"Because of the combination of nano-scale and micron-scale structures, water droplets can only contact about three percent of the surface," Wong said. "They're just not touching very much of the lotus surface as compared to a smooth surface."
To address several unique applications, Georgia Tech researchers have attempted to duplicate the two-tier lotus surface using a variety of materials, including polybutadiene. But that organic compound isn't suitable for coatings that are exposed to sunlight because ultraviolet radiation breaks down its carbon bonds. So to address their first lotus application - self-cleaning insulators used on high-voltage power lines - the researchers had to develop another material.
Supported by the National Electric Energy Testing Research and Applications Center (NEETRAC), that project would solve a problem that plagues electric utilities. The build-up of dirt and dust on ceramic or silicone insulators used by high-voltage power lines can eventually create a short circuit that can damage the electric distribution network. It's impractical to manually clean the insulators.
Wong and collaborators Yonghao Xiu, Lingbo Zhu and Dennis Hess have developed a lotus surface able to withstand ultraviolet radiation using a combination of silicone, fluorocarbons, and inorganics such as titanium dioxide and silicon dioxide. Their prototype coating has shown excellent durability in long-term testing.
Supported by the National Science Foundation, NASA and other agencies, Georgia Tech is also pursuing other work based on lotus applications:
- Use of carbon nanotube bundles to create the surface bumps needed to prevent dust from accumulating on the surfaces of photovoltaic (PV) cells, space suits and other equipment intended for use on the moon or Mars - where there's no rain. Arranging patterns of nanotube bundles a few microns apart and applying a weak electrical charge should help keep dust away and maintain maximum efficiency in the PV cells that power space missions.
- Application of lotus coatings to prevent "stiction," which is the strong adhesive force that can form between the structures of micro-electromechanical systems (MEMS) and substrates. The magnitude of these forces can be enough to deform the structures, resulting in device failure. With its superhydrophobicity and surface roughness, a lotus surface coating can prevent stiction, Wong said.
- A two-tier surface system composed of hexagonally-packed silica spheres on which gold nanoparticles were deposited. The resulting chemical and physical structures were studied to establish the impact of surface hydrophobicity and roughness on the measured contact angles on the rough surfaces.
- Lotus surfaces for use in implantable medical devices to prevent cells from attaching to form blood clots. If successful, this application could replace anti-clotting materials that are coated onto implantable devices such as stents used to hold blood vessels open.
The lotus plant is yet another example of how researchers can learn surprising lessons from what Nature has provided, Wong noted.
"It's not easy to get dust and dirt off a smooth surface," he said. "Though it seems counterintuitive, the roughness actually helps the cleaning process. We believe this lotus surface will have many potential applications."
Georgia Institute of Technology Research News
The self-cleaning action of the lotus plant has intrigued researchers for decades, and recent studies done by researchers in several different groups have demonstrated the reasons behind the plant's unique abilities.
The plant's ability to repel water and dirt results from an unusual combination of a superhydrophobic (water-repelling) surface and a combination of micron-scale hills and valleys and nanometer-scale waxy bumps that create rough surfaces that don't give water or dirt a chance to adhere.
"Because of the combination of nano-scale and micron-scale structures, water droplets can only contact about three percent of the surface," Wong said. "They're just not touching very much of the lotus surface as compared to a smooth surface."
To address several unique applications, Georgia Tech researchers have attempted to duplicate the two-tier lotus surface using a variety of materials, including polybutadiene. But that organic compound isn't suitable for coatings that are exposed to sunlight because ultraviolet radiation breaks down its carbon bonds. So to address their first lotus application - self-cleaning insulators used on high-voltage power lines - the researchers had to develop another material.
Supported by the National Electric Energy Testing Research and Applications Center (NEETRAC), that project would solve a problem that plagues electric utilities. The build-up of dirt and dust on ceramic or silicone insulators used by high-voltage power lines can eventually create a short circuit that can damage the electric distribution network. It's impractical to manually clean the insulators.
Wong and collaborators Yonghao Xiu, Lingbo Zhu and Dennis Hess have developed a lotus surface able to withstand ultraviolet radiation using a combination of silicone, fluorocarbons, and inorganics such as titanium dioxide and silicon dioxide. Their prototype coating has shown excellent durability in long-term testing.
Supported by the National Science Foundation, NASA and other agencies, Georgia Tech is also pursuing other work based on lotus applications:
- Use of carbon nanotube bundles to create the surface bumps needed to prevent dust from accumulating on the surfaces of photovoltaic (PV) cells, space suits and other equipment intended for use on the moon or Mars - where there's no rain. Arranging patterns of nanotube bundles a few microns apart and applying a weak electrical charge should help keep dust away and maintain maximum efficiency in the PV cells that power space missions.
- Application of lotus coatings to prevent "stiction," which is the strong adhesive force that can form between the structures of micro-electromechanical systems (MEMS) and substrates. The magnitude of these forces can be enough to deform the structures, resulting in device failure. With its superhydrophobicity and surface roughness, a lotus surface coating can prevent stiction, Wong said.
- A two-tier surface system composed of hexagonally-packed silica spheres on which gold nanoparticles were deposited. The resulting chemical and physical structures were studied to establish the impact of surface hydrophobicity and roughness on the measured contact angles on the rough surfaces.
- Lotus surfaces for use in implantable medical devices to prevent cells from attaching to form blood clots. If successful, this application could replace anti-clotting materials that are coated onto implantable devices such as stents used to hold blood vessels open.
The lotus plant is yet another example of how researchers can learn surprising lessons from what Nature has provided, Wong noted.
"It's not easy to get dust and dirt off a smooth surface," he said. "Though it seems counterintuitive, the roughness actually helps the cleaning process. We believe this lotus surface will have many potential applications."
Georgia Institute of Technology Research News
MEMS Current Events and MEMS News RSSAsthma monitoring on the Web
An inexpensive web-enabled device for measuring lung function in patients with asthma and other disorders is being developed by researchers at Texas Instruments, in Bangalore, India, and co-workers. Writing in the International Journal of Biomedical Engineering and Technology, the team explains how the devise could allow physicians to monitor their patients remotely and quickly instigate medical attention in an emergency.
True properties of carbon nanotubes measured
For more than 15 years, carbon nanotubes (CNTs) have been the flagship material of nanotechnology. Researchers have conceived applications for nanotubes ranging from microelectronic devices to cancer therapy. Their atomic structure should, in theory, give them mechanical and electrical properties far superior to most common materials.
Microrobots dance on something smaller than a pin's head
Microscopic robots crafted to maneuver separately without any obvious guidance are now assembling into self-organized structures after years of continuing research led by a Duke University computer scientist.
Are nanobots on their way?
The first real steps towards building a microscopic device that can construct nano machines have been taken by US researchers. Writing in the peer-reviewed publication, International Journal of Nanomanufacturing from Inderscience Publishers, researchers describe an early prototype for a nanoassembler.
Strengthening Fluids With Nanoparticles
Researchers at Rensselaer Polytechnic Institute have demonstrated that liquids embedded with nanoparticles show enhanced performance and stability when exposed to electric fields. The finding could lead to new types of miniature camera lenses, cell phone displays, and other microscale fluidic devices.
MIT gas sensor is tiny, quick
Engineers at MIT are developing a tiny sensor that could be used to detect minute quantities of hazardous gases, including toxic industrial chemicals and chemical warfare agents, much more quickly than current devices.
NIST develops test method for key micromechanical property
Engineers and researchers designing and building new microelectromechanical systems (MEMS) can benefit from a new test method developed at the National Institute of Standards and Technology (NIST) to measure a key mechanical property of such systems: elasticity.
Research by Case School of Engineering professors, VA collaborators earn cover of prestigious science publication
An interdisciplinary team from the department of macromolecular science and engineering at Case Western Reserve University, the Louis Stokes Cleveland VA Medical Center and the NASA Glenn Research Center earned the December 2007 cover of Nature Nanotechnology, one of the world's most prestigious scholarly journals covering research in nanoscience and nanotechnology.
Unique porous copper structure enables new generation of military micro-detonators
Tiny copper structures with pores at both the nanometer and micron size scales could play a key role in the next generation of detonators used to improve the reliability, reduce the size and lower the cost of certain military munitions.
Job-related stress: NIST demonstrates fatigue effects in silicon
Researchers at the National Institute of Standards and Technology (NIST) have demonstrated a mechanical fatigue process that eventually leads to cracks and breakdown in bulk silicon crystals-a phenomenon that's particularly interesting because it long has been thought not to exist.
More MEMS Current Events and MEMS News Articles
 | Wilfrid Gordon McDonald Partridge (Public Television Storytime Books) by Mem Fox Wilfrid Gordon McDonald Partridge, a rather small boy, lives next door to a nursing home in which resides Miss Nancy Alison Delacourt Cooper, his favorite friend, because she has four names as well. When Miss Nancy "loses" her memory, the intrepid Wilfrid sets out to find it for her. Full... |
 | Koala Lou by Mem Fox When Koala Lou’s mother becomes so busy that she forgets to tell her firstborn how much she loves her, Koala Lou enters the Bush Olympics, intending to win an event and her mother’s love all at one time. “A first-rate choice for bedtime, story hour, or reading aloud.”--The Horn... |
 | Ten Little Fingers and Ten Little Toes by Mem Fox As everyone knows, nothing is sweeter than tiny baby fingers and chubby baby toes. . . . And here, from two of the most gifted picture-book creators of our time, is a celebration of baby fingers, baby toes, and the joy they—and the babies they belong to—bring to everyone, everywhere, all over the world! This is a gorgeously simple picture book for very young children, and... |
 | Whoever You Are (Reading Rainbow Book) by Mem Fox Every day all over the world, children are laughing and crying, playing and learning, eating and sleeping. They may not look the same or speak the same language. Their lives may be quite different. But inside, they are alike. Stirring words and bold paintings weave their way around our earth, across cultures and generations. At a time when tolerance still needs to be learned, Whoever You Are... |
 | Reading Magic: Why Reading Aloud to Our Children Will Change Their Lives Forever by Mem Fox A new and revised edition! Bestselling children's author and internationally respected literacy expert Mem Fox reveals the incredible emotional and intellectual impact reading aloud to children has on their ability to learn to read. With passion and humor, Fox speaks of when, where, and why to read aloud and demonstrates how to read aloud to best effect and how to get the... |
 | Where Is the Green Sheep? (Horn Book Fanfare List (Awards)) by Mem Fox, Judy Horacek There are red sheep and blue sheep, wind sheep and wave sheep, scared sheep and brave sheep, but where is the green sheep? The search is on in this cozy, sheep-filled story from acclaimed author Mem Fox and popular Australian cartoonist Judy Horacek. Complete with sleepy rhymes and bright illustrations, this book is sure to delight children of all ages, from the very young to those just... |
 | Foundations of MEMS (Illinois Ece Series) by Chang Liu |
 | Time for Bed (Big Book Edition) by Mem Fox Darkness is falling everywhere and little ones are getting sleepy, feeling cozy, and being tucked in. It’s time for a wide yawn, a big hug, and a snuggle under the covers--sleep tight! “Working beautifully with the soothingly repetitive text, each painting conveys a warm feeling of safety and affection.”--School Library... |
 | Teaching With Favorite Mem Fox Books: Engaging, Skill-Building Activities That Help Kids Learn About Feelings, Families, Friendship and More by Pamela Chanko Introduce children to the work of this popular author with learning-rich activities like Possum’s Postcards, Koala Lou’s Playground Olympics, and Magic Hat Math. Includes a profile of the author, before- and after-reading discussion ideas, plus hands-on activities and reproducibles that build skills across the... |
 | Possum Magic (Voyager Books) by Mem Fox Grandma Poss uses her best bush magic to make Hush invisible. But when Hush longs to be able to see herself again, the two possums must make their way across Australia to find the magic food that will make Hush visible once more. “Another treat from Mem Fox that is sure to be treasured. The whimsical illustrations are a wonderful complement.”--Children’s Book Review... |
| © 2008 BrightSurf.com |