 |
|
Robotics, laser and wireless technologies make driving safer for wheelchair users
December 13, 2006New modular system places handicapped operators in standard auto seats and stows their wheelchairs while they drive
Engineers at Lehigh and Carnegie Mellon universities, working with a Philadelphia-based start-up, have integrated robotics, laser and wireless technologies into a new system that promises to make it safer and cheaper for wheelchair users to drive a car.
The Automatic Transport and Retrieval System (ATRS), scheduled to go on sale next spring, allows wheelchair users to get in and out of their vehicles, stow and retrieve their chairs, and drive while sitting in standard automobile seats.
The new system is the product of a collaboration between the two universities; Freedom Sciences LLC, a robotics company located at the Philadelphia Navy Yard; and Freedom Lift Corp. of Green Lane, Pa. Freedom Sciences has signed a licensing agreement on the ATRS with Lehigh.
John Spletzer, assistant professor of computer science and engineering, says the ATRS has achieved a breakthrough by enabling wheelchair users to drive while sitting in standard automobile seats that meet federal safety regulations.
Current solutions for wheelchair users who desire independent mobility require operators to sit in their chairs while driving. Because they are often poorly secured and not crash-test-approved, wheelchairs provide far less protection than standard seats. According to the U.S. National Highway Traffic Safety Administration, 35 percent of all automobile fatalities related to wheelchairs result from inadequately secured chairs.
The ATRS is also modular, says Spletzer, and can be installed without making permanent - and expensive - changes to the vehicle. Drivers trading in their cars merely remove the ATRS from the old vehicle and install it in the new one.
By contrast, wheelchairs users who now wish to drive must convert their vehicles, which requires lowering or replacing the floor of their van or minivan; rerouting fuel lines, heating and air-conditioning systems; and relocating the fuel tank.
"These changes severely restrict the resale value of the vehicle," says Spletzer. "With the ATRS, however, you can buy or lease a vehicle, usually a van, and install the ATRS without making permanent changes to the vehicle. If you decide to buy another vehicle, you simply remove the ATRS, sell or return your van, and install the ATRS in your new vehicle.
"This gives you a lot more freedom and personal choice."
The ATRS will cost $15,000 to $20,000, versus the $30,000 and up that wheelchair users now pay to convert vehicles. The figures do not include the cost of the wheelchair or vehicle.
Spletzer and Tom Panzarella, CEO of Cook Technologies, parent company of Freedom Lift Corp., say the ATRS should be a boon to the six million people who, according to the U.S. Bureau of Transportation, have difficulty finding transportation.
"This is a major contributor to the unemployment rate of the disabled population nationally, which is estimated at over 65 percent by the U.S. Census Bureau," Spletzer and Panzarella wrote in a report.
How it works
The ATRS contains three key components: an articulated power seat that extends outside the vehicle to facilitate wheelchair-to-seat transfers, a power lift platform, and a "smart" wheelchair system.
The ATRS works in the following manner:
You move your powered wheelchair next to the driver's side of your vehicle. Using a remote-control device similar to a key fob, you open the vehicle door and direct the vehicle to lower the driver's seat alongside your wheelchair. You then slide over from your wheelchair into the driver's seat. Once in the driver's seat, you deploy the power lift platform from the rear of the vehicle through the touch of a button.
Using a joystick for remote control, you then guide your empty wheelchair to the rear of the van. There, the chair is switched to autonomous mode, and drives itself onto the lift platform using position feedback from an integrated laser system at a rate of 10 times per second. The lift platform then raises and stows the chair in the back of the van.
At this point, you press another button to raise the driver's seat, in which you are sitting, up into the van. The driver's seat is then restored to its normal driving position and secured.
When you arrive at your destination, you reverse the entire procedure.
Spletzer, who directs Lehigh's Vision, Autonomous Devices, and Experimental Robotics (VADER) Laboratory, says the ATRS represents a cutting-edge application of mobile robotics.
"There have been many advances in mobile robotics in recent years," says Spletzer, who has worked two years with Freedom Sciences on the ATRS. "But most of these outdoor applications are in mining and other environments where people are excluded by design. The ATRS, on the other hand, is designed to assist humans and to be used with their direction. We believe it has the potential to become one of the most widespread outdoor applications of commercial robotics to date."
The ATRS contains several other features that add value while enhancing reliability and safety, says Spletzer.
- The laser system on the rear lift platform takes corrective action if an obstruction or slick spot causes the wheelchair to veer off course as it moves toward the platform.
"The laser system is constantly monitoring itself," says Spletzer. "If it is not 99.9 percent sure that the docking will be successful, it will back the chair up and perform corrective action."
- A camera above the platform lift, working in tandem with a human-robot user-interface computer on the ATRS dashboard, lets the driver know when to use the joystick to close the rear hatch of the ATRS-equipped vehicle.
- Once the chair has been stowed, two hooks on the rear platform grip a plow bar on the chair and lock it in place.
"In the event of a vehicle accident or collision, the locking mechanism prevents the chair from becoming a dangerous projectile inside the vehicle," says Spletzer.
- To help drivers move from wheelchair to car seat, the ATRS Freedom Seat is fully articulated. Its adjustable height allows drivers to always move down when they slide from wheelchair to car seat or vice versa.
- The system's modularity enables the ATRS to accommodate almost all sizes and models of wheelchairs and to offer easy upgrades for wheelchair users who have progressive diseases.
Next year, says Spletzer, Freedom Sciences is planning to develop an advanced ATRS for wheelchair users who have difficulty sliding themselves from the chair to the car seat. The new system will be fully automated, using a small "smart" camera instead of a joystick.
The modifications required to make a wheelchair ATRS-compatible are invisible, says Spletzer, as the computing, gyroscope and encoders that are added to the chair are transparent to the user. "In normal day to day use," he says, "it is no different from a standard power chair."
The ATRS is going to market at an opportune time, say Spletzer and Panzarella.
The expected increase in the population of Americans aged 65 and over will no doubt cause a corresponding rise in the number of wheelchair users, they say.
"We've already received a number of e-mails from people who say the ATRS will really help them in their daily lives,\\\
Lehigh University
The new system is the product of a collaboration between the two universities; Freedom Sciences LLC, a robotics company located at the Philadelphia Navy Yard; and Freedom Lift Corp. of Green Lane, Pa. Freedom Sciences has signed a licensing agreement on the ATRS with Lehigh.
John Spletzer, assistant professor of computer science and engineering, says the ATRS has achieved a breakthrough by enabling wheelchair users to drive while sitting in standard automobile seats that meet federal safety regulations.
Current solutions for wheelchair users who desire independent mobility require operators to sit in their chairs while driving. Because they are often poorly secured and not crash-test-approved, wheelchairs provide far less protection than standard seats. According to the U.S. National Highway Traffic Safety Administration, 35 percent of all automobile fatalities related to wheelchairs result from inadequately secured chairs.
The ATRS is also modular, says Spletzer, and can be installed without making permanent - and expensive - changes to the vehicle. Drivers trading in their cars merely remove the ATRS from the old vehicle and install it in the new one.
By contrast, wheelchairs users who now wish to drive must convert their vehicles, which requires lowering or replacing the floor of their van or minivan; rerouting fuel lines, heating and air-conditioning systems; and relocating the fuel tank.
"These changes severely restrict the resale value of the vehicle," says Spletzer. "With the ATRS, however, you can buy or lease a vehicle, usually a van, and install the ATRS without making permanent changes to the vehicle. If you decide to buy another vehicle, you simply remove the ATRS, sell or return your van, and install the ATRS in your new vehicle.
"This gives you a lot more freedom and personal choice."
The ATRS will cost $15,000 to $20,000, versus the $30,000 and up that wheelchair users now pay to convert vehicles. The figures do not include the cost of the wheelchair or vehicle.
Spletzer and Tom Panzarella, CEO of Cook Technologies, parent company of Freedom Lift Corp., say the ATRS should be a boon to the six million people who, according to the U.S. Bureau of Transportation, have difficulty finding transportation.
"This is a major contributor to the unemployment rate of the disabled population nationally, which is estimated at over 65 percent by the U.S. Census Bureau," Spletzer and Panzarella wrote in a report.
How it works
The ATRS contains three key components: an articulated power seat that extends outside the vehicle to facilitate wheelchair-to-seat transfers, a power lift platform, and a "smart" wheelchair system.
The ATRS works in the following manner:
You move your powered wheelchair next to the driver's side of your vehicle. Using a remote-control device similar to a key fob, you open the vehicle door and direct the vehicle to lower the driver's seat alongside your wheelchair. You then slide over from your wheelchair into the driver's seat. Once in the driver's seat, you deploy the power lift platform from the rear of the vehicle through the touch of a button.
Using a joystick for remote control, you then guide your empty wheelchair to the rear of the van. There, the chair is switched to autonomous mode, and drives itself onto the lift platform using position feedback from an integrated laser system at a rate of 10 times per second. The lift platform then raises and stows the chair in the back of the van.
At this point, you press another button to raise the driver's seat, in which you are sitting, up into the van. The driver's seat is then restored to its normal driving position and secured.
When you arrive at your destination, you reverse the entire procedure.
Spletzer, who directs Lehigh's Vision, Autonomous Devices, and Experimental Robotics (VADER) Laboratory, says the ATRS represents a cutting-edge application of mobile robotics.
"There have been many advances in mobile robotics in recent years," says Spletzer, who has worked two years with Freedom Sciences on the ATRS. "But most of these outdoor applications are in mining and other environments where people are excluded by design. The ATRS, on the other hand, is designed to assist humans and to be used with their direction. We believe it has the potential to become one of the most widespread outdoor applications of commercial robotics to date."
The ATRS contains several other features that add value while enhancing reliability and safety, says Spletzer.
- The laser system on the rear lift platform takes corrective action if an obstruction or slick spot causes the wheelchair to veer off course as it moves toward the platform.
"The laser system is constantly monitoring itself," says Spletzer. "If it is not 99.9 percent sure that the docking will be successful, it will back the chair up and perform corrective action."
- A camera above the platform lift, working in tandem with a human-robot user-interface computer on the ATRS dashboard, lets the driver know when to use the joystick to close the rear hatch of the ATRS-equipped vehicle.
- Once the chair has been stowed, two hooks on the rear platform grip a plow bar on the chair and lock it in place.
"In the event of a vehicle accident or collision, the locking mechanism prevents the chair from becoming a dangerous projectile inside the vehicle," says Spletzer.
- To help drivers move from wheelchair to car seat, the ATRS Freedom Seat is fully articulated. Its adjustable height allows drivers to always move down when they slide from wheelchair to car seat or vice versa.
- The system's modularity enables the ATRS to accommodate almost all sizes and models of wheelchairs and to offer easy upgrades for wheelchair users who have progressive diseases.
Next year, says Spletzer, Freedom Sciences is planning to develop an advanced ATRS for wheelchair users who have difficulty sliding themselves from the chair to the car seat. The new system will be fully automated, using a small "smart" camera instead of a joystick.
The modifications required to make a wheelchair ATRS-compatible are invisible, says Spletzer, as the computing, gyroscope and encoders that are added to the chair are transparent to the user. "In normal day to day use," he says, "it is no different from a standard power chair."
The ATRS is going to market at an opportune time, say Spletzer and Panzarella.
The expected increase in the population of Americans aged 65 and over will no doubt cause a corresponding rise in the number of wheelchair users, they say.
"We've already received a number of e-mails from people who say the ATRS will really help them in their daily lives,\\\
Lehigh University
Wheelchair Current Events and Wheelchair News RSSExon-skipping drug prevents muscle wasting, maintains muscle function in dystrophin deficient mice
An exon skipping PPMO has demonstrated dramatic effects in the prevention and treatment of severely affected, dystrophin and utrophin-deficient mice, preventing severe deterioration of the treated animals and extending their lifespan.
Brain-damaged children often have cold feet
Many wheelchair-using children with neurological disorders have much colder hands and feet than other children, and most receive no special help even though they have had these problems for a long time, is revealed in at thesis from the Sahlgrenska Academy at the University of Gothenburg, Sweden.
Mechanism for potential Friedreich's ataxia drug uncovered
Using clever chemistry, a Scripps Research team has pinpointed the enzyme target of a drug group that stops the progression of the devastating disease Friedreich's ataxia in mice and may do the same for humans.
Clinical trial shows quadriplegics can operate powered wheelchair with tongue drive system
An assistive technology that enables individuals to maneuver a powered wheelchair or control a mouse cursor using simple tongue movements can be operated by individuals with high-level spinal cord injuries, according to the results of a recently completed clinical trial.
Researchers make progress toward early identification of muscular dystrophy
The saying "Knowing is half the battle" is never more true than when discussing early treatment of disease. Muscular dystrophy is one such disease where patients can benefit from early treatment. Now, new research is moving doctors and scientists closer to disease diagnosis in advance of patient symptoms.
New therapy substitutes missing protein in those with muscular dystrophy
Researchers at the University of Minnesota Medical School have discovered a new therapy that shows potential to treat people with Duchenne muscular dystrophy, a fatal disease and the most common form of muscular dystrophy in children.
Muscular dystrophy diagnosis delayed almost 2.5 years in boys
Boys show signs of Duchenne Muscular Dystrophy (DMD) for 2 ฝ years before they obtain a diagnosis and disease-specific treatment, about the same length of delay children have endured for the past 20 years despite advances in genetic testing and treatment.
Ultrasound imaging now possible with a smartphone
Computer engineers at Washington University in St. Louis are bringing the minimalist approach to medical care and computing by coupling USB-based ultrasound probe technology with a smartphone, enabling a compact, mobile computational platform and a medical imaging device that fits in the palm of a hand.
Nanotech coating could lead to better brain implants to treat diseases
Biomedical and materials engineers at the University of Michigan have developed a nanotech coating for brain implants that helps the devices operate longer and could improve treatment for deafness, paralysis, blindness, epilepsy and Parkinson's disease.
New step in DNA damage response in neurons discovered
Researchers have identified a biochemical switch required for nerve cells to respond to DNA damage.
More Wheelchair Current Events and Wheelchair News Articles
 |
Drive Medical FW19BL Fly-Weight Transport Chair, 19 Inch, Blue by Drive Medical The Deluxe Fly-Weight Transport Chair is from Drive Medical, one of the country's fastest growing manufactures of Durable Medical Equipment. The all aluminum frame chair weighs only 19 lbs., which is 30% less than a traditional transport chair, while maintaining a weight capacity of 300 lbs. The seat width is 19". The deluxe back release allows the back to fold down for easy storage and transport. The footrests swing away and are easily removed. The chair comes with a seat belt for added safety. Maintenance free composite 8" wheels are on the front and rear making it easy to maneuver the chair. There is a convenient carry pocket in the back for storage of personal items. The upholstery is soft plush black nylon. The frame is dark blue. The chair is covered by a limited lifetime... |
 |
Invacare LightWeight Tracer EX2 Wheelchair 20" with Swingaway Footrest-Blue (Folding, Assembled) by Invacare The Invacare IVC Tracer EX2 wheelchair sets the new standard in manual wheelchairs. The Tracer EX2 combines the design and technology of the Invacare 9000 series and incorporates it into the Invacare Tracer series. A true dual axle position allows for repositioning the 24" rear wheels and 8" casters for adult and hemi seat-to-floor heights. Hemi spaced footrest and a full range of accessories and a lifetime warranty. The new design also makes it possible to interchange components with the 9000 series chairs. Meets RESNA standards for manual wheelchairs in product performance. SPECIFICATIONS:: Seat To Floor Height: 17.5" and 19.5",Back Height: 16" fixed, Product Weight: 36 lb. ,Product Weight Capacity: 250 lb.,Warranty: Lifetime on frame and crossbraces |
 |
Self Transport Folding Wheelchair with Detachable Desk Armrests, Swing-away Detachable Elevating Leg Rests, Solid Castors and Large Rolling Rear Wheels. by Prestige International Trading SPECIFICATIONS SEAT WIDTH: SEAT WIDTH: 18" | SEAT DEPTH: 16" | SEAT TO FLOOR HEIGHT: 19" | WHEEL-TO-WHEEL WIDTHS: 27" | ARM STYLE: REMOVABLE FULL-LENGTH | NEW DESIGN 8" FRONT CASTERS WEIGHT: 49 LBS WEIGHT CAPACITY: 250 LBS. PLEASE NOTE THIS ITEM CURRENTLY CAN ONLY BE SHIPPED TO A PHYSICAL STREET ADDRESS WITHIN THE 48 CONTIGUOUS US STATES, WE APOLOGIZE FOR ANY INCONVENIENCE THIS MIGHT CAUSE. |
 |
Light 14.8 lbs Medline Freedom Transport Wheelchair 300 lb Cap Chair, BLUE by MedLine Cup holder on front of chair (for patient) Backside of chair contains: key ring and multiple pockets for your billfold or iPod, cell phone, drinking bottle, and identification tag ยท Fold-down back for easy transport ยท Comfortable, "restaurant-style" arms ยท Seat belt for added safety ยท Quality by Medline Industries Specifications: Seat - 19" wide x 16" deep Seat Height - 18" from floor Folded Width - only 9" Folded Height - 28.5" Weight - 14.5 lbs Weight Capacity - 300 lbs. |
 |
18" Mobile Wheelchair with Steel Frame, Padded Armrest, Detachable Footrests, Solid Castors and Large Rear Wheels. by Prestige International Trading SEAT WIDTH: 18" | SEAT DEPTH: 16" | SEAT TO FLOOR HEIGHT: 19.5" | ARM STYLE: FIXED FULL-LENGTH | FOOTRESTS: DETACHABLE | NEWLY DESIGNED CASTERS WITH SOFT-GRIP TIRES| WHEELCHAIR WEIGHT: 33 LBS | WEIGHT CAPACITY: 250 LBS. HANDLE HEIGHT - 27" | ONLY 9" THICK WHEN FOLDED. PLEASE NOTE THIS ITEM CURRENTLY CAN ONLY BE SHIPPED TO A PHYSICAL STREET ADDRESS WITHIN THE 48 CONTIGUOUS US STATES, WE APOLOGIZE FOR ANY INCONVENIENCE THIS MIGHT CAUSE. |
 |
Transport Folding Lightweight Wheelchair with Carbon Steel Frame, Dual Handbrakes, Padded Armrests, Detachable Footrests, and Drop Back Handle. by Prestige International Trading SEAT BELT FOR ADDED SAFETY. BUILD-IN BACKPOCKET FOR ADDITIONAL STORAGE. CARBON STEEL FRAME. 18" X 16" SEAT GROSS WEIGHT UNDER 28 LBS. 250 LB. WEIGHT CAPACITY. REMOVABLE FOOTRESTS. CHROME FRAME WITH BLACK UPHOLSTERY. THE TOTAL WIDTH FOR THIS WHEELCHAIR IS ABOUT 24.5". SLIGHTLY THICKER THAN 10" WHEN FOLDED, EASY FOR STORAGE AND TRANSPORTATION. PLEASE NOTE THIS ITEM CURRENTLY CAN ONLY BE SHIPPED VIA STANDARD SHIPPING TO A PHYSICAL STREET ADDRESS WITHIN THE 48 CONTIGUOUS US STATES, WE APOLOGIZE FOR ANY INCONVENIENCE THIS MIGHT CAUSE. |
|
|
Invacare Tracer EX2 Wheelchair with Removable Arms by INVACARE The Invacare IVC Tracer EX2 wheelchair sets the new standard in manual wheelchairs. The Tracer EX2 combines the design and technology of the Invacare 9000 series and incorporates it into the Invacare Tracer series. A true dual axle position allows for repositioning the 24" rear wheels and 8" casters for adult and hemi seat-to-floor heights. Hemi spaced footrest and a full range of accessories. The new design also makes it possible to interchange components with the 9000 series chairs. Meets RESNA standards for manual wheelchairs in product performance. 14-gauge crossbraces add strength and durability Dual axle positions allow variation of seat- to-floor heights Durable, low-maintenance, triple chrome-plated, carbon steel frame is... |
 |
Duro-Med Polyfoam Wheelchair Cushion, Poly/Cotton Cover, Navy, 3" x 16" x 18" by Duro-Med Duro-Med Polyfoam Wheelchair Cushions are made of polyurethane foam construction that help maintain soft, even support for maximum comfort. The cushions are available in a wide range of sizes to fit most wheelchairs.The size of the cushion is 3" x 16" x 18". The navy poly/cotton cover is removable and washable. |
 |
Duro-Med 18 Standard Wheelchair, Silver/Black by Duro-Med Duro-Med's 18" standard wheelchairs are designed with both economy and quality in mind and has removable desk arms. Chip resistant, easy to clean, durable, chrome-plated carbon-steel frame, construction. Single axle, 24" rear mag-style composite wheels, urethane tires and maintenance-free durability. Front wheels feature 8" mag-style composite caster wheels. Easy to reach "push to lock" brake for added safety and security. Chrome-plated handrails, padded armrests and embossed vinyl upholstry contribute to imporved user comfort. All front riggings come with lightweight foot plates and are interchangeable with most major wheelchair lines. |
 |
Lightweight Transport Wheelchair/Wheel Chair 12" Wheels by MedLine This transport wheelchair is so easy to push on any type of surface. The oversize 12 1/2" rear wheels make the chair roll easily, even on grass, gravel, etc. The chair folds twice, so it can be stored in a small area. Be sure to see all the pictures below. Benefits include: Lightweight at only 23 1/2 pounds Sturdy powder-coated burgundy aluminum frame Perfect for zoos, festivals, airports, etc. Folds twice - back folds down and frame folds for easy transport and storage Easy care, durable nylon upholstery Padded arm rests for extra comfort Seatbelt included for your safety Swing away removable foot rests included Handy chart pocket on back of seat for storing personal items Black composite wheels require virtually no maintenance Dual-sealed precision bearings Loop brakes on the hand grips... |
| © 2009 BrightSurf.com |