 |
|
The world's largest particle accelerator has been completed
April 02, 2007The last quadripolar magnet was brought down into the tunnel of the world's largest particle accelerator; the CERN's1 LHC, or Large Hadron Collidor. This magnet is part of a series of 392 units which will ensure that the beams are kept on track all along their trajectory through the tunnel. Its installation marks the completion of a long and fruitful collaboration between the CERN, the CNRS/IN2P32 and the CEA/DSM3 in the field of superconductivity and advanced cryogenics. This collaboration has lasted over ten years and was part of the special contribution made by France, as the host country, to the construction of the LHC.
Built to answer the most fundamental questions in physics, the LHC accelerator is assembled at the CERN in a tunnel which has a circumference of 27 km and is buried 100 metres beneath the Franco-Swiss border. It is composed of 1700 large magnets of which 392 are quadripole magnets designed to guide and focus the beams. It also includes a significant quantity of corrective magnets. The final installation of the LHC will be completed in mid-2007, and start-up is planned for November 2007.
In order to meet the considerable technological challenges presented by the LHC, the CNRS, CEA and CERN collaborated closely in the construction of the accelerator. The protocol of collaboration amongst these three organizations was signed on February 14, 1996 in the presence of the Minister responsible for research.
The performance of the LHC's beam-guiding magnets is ensured by their operating in a supra-conductive state which can only be reached if the system is maintained at very low temperatures. Therefore the LHC requires the largest cryogenic infrastructure ever created. Within this infrastructure the CNRS and the CEA, along with CERN teams, conceived and validated the cryogenics using superfluid helium at -271°C, a temperature lower than that of interstellar space. In addition, France played a principle role in the creation of the focusing units by conceiving the LHC's principle quadripole superconductors and their cold mass assembly. The 392 quadripole magnets are now all in the tunnel and will ensure that the beams are kept on track. This means that they will control the beams' millimetric dimension all the way along their trajectory. These magnets are inserted in enclosures of liquid helium along with corrector magnets as well as other components. This complex assembly is called cold mass. It is then itself surrounded by a cryostat and a server module. All of this forms what is known as a short-straight section.
The CEA-Dapnia created the prototypes and then participated in the technology transfer and monitoring of industrial production of the 392 quadripole cold masses in Germany. The Orsay Institute of Nuclear Physics (CNRS/IN2P3 - Paris University 11) participated in the design and creation of the short-straight section cryostats from prototype to industrialization. The institute's contribution went as far as monitoring production and assembly of the series at the CERN. The first short-straight section, and thus the first quadripole magnet, was brought down into the LHC tunnel in April 2005.
The Orsay Institute of Nuclear Physics also developed and calibrated over 6000 thermometers which will measure and monitor all of the LHC supraconductor's elements to the nearest tenth of a degree. The Low-Temperature division of the CEA participated in monitoring the production, delivery and installation of the -271°C refrigeration units, after having led the initial basic design work. This same division perfected the cryogenics for the experimental Tore Supra system in Cadarache, used for research on controlled fusion.
The installation of the last quadripole magnet marks the end of the collaboration related to France's special contribution to the project. France's commitments to the construction of the LHC have been honoured, and even significantly surpassed. French assistance to the LHC continues for putting the equipment into operation. Beyond the LHC, the technologies developed through this collaboration are transferable to several major pieces of equipment currently being studied, developed, or under construction.
Which conducts electricity with zero resistance.
The assmembly of the short-straight sections at the CERN and bringing the last of these down into the LHC tunnel © CERN
CNRS
The performance of the LHC's beam-guiding magnets is ensured by their operating in a supra-conductive state which can only be reached if the system is maintained at very low temperatures. Therefore the LHC requires the largest cryogenic infrastructure ever created. Within this infrastructure the CNRS and the CEA, along with CERN teams, conceived and validated the cryogenics using superfluid helium at -271°C, a temperature lower than that of interstellar space. In addition, France played a principle role in the creation of the focusing units by conceiving the LHC's principle quadripole superconductors and their cold mass assembly. The 392 quadripole magnets are now all in the tunnel and will ensure that the beams are kept on track. This means that they will control the beams' millimetric dimension all the way along their trajectory. These magnets are inserted in enclosures of liquid helium along with corrector magnets as well as other components. This complex assembly is called cold mass. It is then itself surrounded by a cryostat and a server module. All of this forms what is known as a short-straight section.
The CEA-Dapnia created the prototypes and then participated in the technology transfer and monitoring of industrial production of the 392 quadripole cold masses in Germany. The Orsay Institute of Nuclear Physics (CNRS/IN2P3 - Paris University 11) participated in the design and creation of the short-straight section cryostats from prototype to industrialization. The institute's contribution went as far as monitoring production and assembly of the series at the CERN. The first short-straight section, and thus the first quadripole magnet, was brought down into the LHC tunnel in April 2005.
The Orsay Institute of Nuclear Physics also developed and calibrated over 6000 thermometers which will measure and monitor all of the LHC supraconductor's elements to the nearest tenth of a degree. The Low-Temperature division of the CEA participated in monitoring the production, delivery and installation of the -271°C refrigeration units, after having led the initial basic design work. This same division perfected the cryogenics for the experimental Tore Supra system in Cadarache, used for research on controlled fusion.
The installation of the last quadripole magnet marks the end of the collaboration related to France's special contribution to the project. France's commitments to the construction of the LHC have been honoured, and even significantly surpassed. French assistance to the LHC continues for putting the equipment into operation. Beyond the LHC, the technologies developed through this collaboration are transferable to several major pieces of equipment currently being studied, developed, or under construction.
Which conducts electricity with zero resistance.
The assmembly of the short-straight sections at the CERN and bringing the last of these down into the LHC tunnel © CERN
CNRS
Particle Accelerator Current Events and Particle Accelerator News RSSU-M physicists' analysis leads to discovery of new particle
University of Michigan physicists played a leading role in the discovery of a new particle, the Omega b baryon, which is an exotic relative of the proton.
First beam for Large Hadron Collider
An international collaboration of scientists today sent the first beam of protons zooming at nearly the speed of light around the world's most powerful particle accelerator-the Large Hadron Collider (LHC)-located at the CERN laboratory near Geneva, Switzerland.
First beam for Large Hadron Collider, world's mightiest particle accelerator
An international collaboration of scientists today sent the first beam of protons zooming at nearly the speed of light around the 17-mile-long underground circular path of the Large Hadron Collider (LHC), the world's most powerful particle accelerator, located at the CERN laboratory near Geneva, Switzerland.
UC Santa Barbara has key role in Large Hadron Collider project
Earlier today, some 300 feet below the Earth's surface, in a circular tunnel so extensive that it travels from Switzerland into France and back again, scientists at the Large Hadron Collider (LHC) at the European Organization for Nuclear Research (CERN) in Geneva fired the first beams of protons that they hope will eventually produce history-making science.
Boston physicists celebrate first beam for Large Hadron Collider
Scientists today sent the first beam of protons zooming at nearly the speed of light around the 17-mile Large Hadron Collider. The LHC, located at the CERN laboratory near Geneva, Switzerland, is the world's most powerful particle accelerator.
Iowa State scientists, students contribute to world's biggest science experiment
The first beam of protons will begin racing around the world's biggest science experiment on Wednesday, Sept. 10, and Iowa State University physicists will be part of the research team taking notes.
UCSB professor's paper on safety of large hadron collider to be published in Physical Review D
Particle colliders creating black holes that could devour the Earth. Sounds like a great Hollywood script.
Nuclear scientists eye future landfall on a second 'island of stability'
Modern-day scientific Magellans and Columbus's, exploring the uncharted seas at the fringes of the Periodic Table of the Elements, have landed on one long-sought island - the fabled Island of Stability, home of a new genre of superheavy chemical elements sought for more than three decades.
Physicists and engineers search for new dimension
The universe as we currently know it is made up of three dimensions of space and one of time, but researchers in the Department of Physics and the Department of Electrical and Computer Engineering at Virginia Tech are exploring the possibility of an extra dimension.
Last large piece of ATLAS detector lowered underground
Today, researchers in the U.S. ATLAS collaboration joined colleagues around the world to celebrate a pivotal landmark in the construction of the Large Hadron Collider (LHC) - the lowering of the final piece of the ATLAS particle detector into the underground collision hall at CERN in Geneva, Switzerland.
More Particle Accelerator Current Events and Particle Accelerator News Articles
 | Engines of Discovery: A Century of Particle Accelerators by Andrew Sessler, Edmund Wilson This book for the first time chronicles the development of particle accelerators from the invention of electrostatic accelerators, linear accelerators, and the cyclotron to the colliders of today. It also addresses accelerators employed as sources of x-rays, for medical purposes, and in industrial applications. The book identifies the crucial discoveries in applied physics and engineering that... |
 | Introduction To The Physics Of Particle Accelerators by Mario Conte, William W MacKay This book provides a concise and coherent introduction to the physics of particle accelerators, with attention being paid to the design of an accelerator for use as an experimental tool. In the second edition, new chapters on spin dynamics of polarized beams as well as instrumentation and measurements are included, with a discussion of frequency spectra and Schottky signals. The additional... |
 | An Introduction to Particle Accelerators by E. J. N. Wilson There are more than ten thousand particle accelerators in the world from the linear accelerators used for cancer therapy in modern hospitals to the giant 'atom-smashers' at international particle physics laboratories used to unlock the secrets of creation. Many scientists and engineers spend their lives designing, constructing, and operating these machines - yet few universities include the... |
 | Accelerator Physics by S. Y. Lee The development of high energy accelerators began in 1911, when Rutherford discovered the atomic nuclei inside the atom. Since then, progress has been made in the following: (1) development of high voltage dc and rf accelerators, (2) achievement of high field magnets with excellent field quality, (3) discovery of transverse and longitudinal beam focusing principles, (4) invention of... |
 | Particle Accelerator Physics by Helmut Wiedemann Particle Accelerator Physics is an in-depth and comprehensive introduction to the field of high-energy particle acceleration and beam dynamics. Part I gathers the basic tools, recalling the essentials of electrostatics and electrodynamics as well as of particle dynamics in electromagnetic fields. Part II is an extensive primer in beam dynamics, followed in Part III by the introduction and... |
 | The Physics of Particle Accelerators: An Introduction by Klaus Wille The complex technology of particle accelerators is based upon a series of often rather simple physical concepts. This comprehensive introduction to the subject focuses on providing a deep physical understanding of these key ideas. The book surveys the many aspects of accelerator physics and not only explains how accelerators work, but also why the underlying physics leads to a particular choice... |
 | A Primer on Theory and Operation of Linear Accelerators in Radiation Therapy by C. J. Karzmark, Robert J. Morton |
 | 21st Century Complete Guide to the Tevatron at the Fermi National Accelerator Laboratory, Fermilab, World¿s Highest-Energy Particle Accelerator and Collider for Nuclear and High-Energy Physics (Two CD-ROM Superset) by World Spaceflight News This up-to-date electronic book on two CD-ROMs covers the Tevatron at the Fermi National Accelerator Laboratory, Fermilab, known as the world’s highest-energy particle accelerator and collider for nuclear and high-energy physics. Projects and subsystems in the Tevatron department include: * A0 Sextupole * A48 Collimator Project * Alignment * Beam-Beam Compensation * BPM/BLM Upgrades *... |
 | Physics of Intense Charged Particle Beams in High Energy Accelerators by Ronald C. Davidson, Hong Qin ...the book emphasizes basic physics principles, and bears a thorough presentation style that has lasting appeal to graduate students and researchers... |
 | Linear Accelerators for Radiation Therapy, Second Edition (Medical Science Series) by David Greene, P.C Williams Linear Accelerators for Radiation Therapy, Second Edition focuses on the fundamentals of accelerator systems, explaining the underlying physics and the different features of these systems. This edition includes expanded sections on the treatment head, on x-ray production via multileaf and dynamic collimation for the production of wedged and other intensity modulated beams, on electron scattering... |
| © 2008 BrightSurf.com |