 |
|
Nanogenerator provides continuous power by harvesting energy from the environment
April 06, 2007Researchers have demonstrated a prototype nanometer-scale generator that produces continuous direct-current electricity by harvesting mechanical energy from such environmental sources as ultrasonic waves, mechanical vibration or blood flow.
Based on arrays of vertically-aligned zinc oxide nanowires that move inside a novel "zig-zag" plate electrode, the nanogenerators could provide a new way to power nanoscale devices without batteries or other external power sources.
"This is a major step toward a portable, adaptable and cost-effective technology for powering nanoscale devices," said Zhong Lin Wang, Regents' Professor in the School of Materials Science and Engineering at the Georgia Institute of Technology. "There has been a lot of interest in making nanodevices, but we have tended not to think about how to power them. Our nanogenerator allows us to harvest or recycle energy from many sources to power these devices."
Details of the nanogenerator will be reported in the April 6 issue of the journal Science. The research was sponsored by the Defense Advanced Research Projects Agency (DARPA), the National Science Foundation (NSF), and the Emory-Georgia Tech Center of Cancer Nanotechnology Excellence.
The nanogenerators take advantage of the unique coupled piezoelectric and semiconducting properties of zinc oxide nanostructures, which produce small electrical charges when they are flexed.
Fabrication begins with growing an array of vertically-aligned nanowires approximately a half-micron apart on gallium arsenide, sapphire or a flexible polymer substrate. A layer of zinc oxide is grown on top of substrate to collect the current. The researchers also fabricate silicon "zig-zag" electrodes, which contain thousands of nanometer-scale tips made conductive by a platinum coating.
The electrode is then lowered on top of the nanowire array, leaving just enough space so that a significant number of the nanowires are free to flex within the gaps created by the tips. Moved by mechanical energy such as waves or vibration, the nanowires periodically contact the tips, transferring their electrical charges. By capturing the tiny amounts of current produced by hundreds of nanowires kept in motion, the generators produce a direct current output in the nano-Ampere range.
Wang and his group members Xudong Wang, Jinhui Song and Jin Liu expect that with optimization, their nanogenerator could produce as much as 4 watts per cubic centimeter - based on a calculation for a single nanowire. That would be enough to power a broad range of nanometer-scale defense, environmental and biomedical applications, including biosensors implanted in the body, environmental monitors - and even nanoscale robots.
Nearly a year ago, in the April 14, 2006 issue of the journal Science, Wang's research team announced the concept behind the nanogenerators. At that time, the nanogenerator could harvest power from just one nanowire at a time by dragging the tip of an atomic force microscope (AFM) over it. Made of platinum-coated silicon, the tip served as a Schottky barrier, helping accumulate and preserve the electrical charge as the nanowire flexed - and ensuring that the current flowed in one direction.
With its multiple conducting tips similar to those of an AFM, the new zig-zag electrode serves as a Schottky barrier to hundreds or thousands of wires simultaneously, harvesting energy from the nanowire arrays.
"Producing the top electrode as a single assembly sets the stage for scaling up this technology," Wang said. "We can now see the steps involved in moving forward to a device that can power real nanometer-scale applications."
Before that happens, additional development will be needed to optimize current production. For instance, though nanowires in the arrays can be grown to approximately the same length - about one micron - there is some variation. Wires that are too short cannot touch the electrode to produce current, while wires that are too long cannot flex to produce electrical charge.
"We need to be able to better control the growth, density and uniformity of the wires," Wang said. "We believe we can make as many as millions or even billions of nanowires produce current simultaneously. That will allow us to optimize operation of the nanogenerator."
In their lab, the researchers aimed an ultrasound source at their nanogenerator to measure current output over slightly more than an hour. Though there is some fluctuation in output, the current flow was continuous as long as the ultrasonic generator was operating, Wang said.
To rule out other sources of the current measured, the researchers substituted carbon nanotubes - which are not piezoelectric - for the zinc oxide nanowires, and used a top electrode that was flat. In both cases, the resulting devices did not produce current.
Providing power for nanometer-scale devices has long been a challenge. Batteries and other traditional sources are too large, and tend to negate the size advantages of nanodevices. And since batteries contain toxic materials such as lithium and cadmium, they cannot be implanted into the body as part of biomedical applications.
Because zinc oxide is non-toxic and compatible with the body, the new nanogenerators could be integrated into implantable biomedical devices to wirelessly measure blood flow and blood pressure within the body. And they could also find more ordinary applications.
"If you had a device like this in your shoes when you walked, you would be able to generate your own small current to power small electronics," Wang noted. "Anything that makes the nanowires move within the generator can be used for generating power. Very little force is required to move them."
Georgia Institute of Technology Research News
Details of the nanogenerator will be reported in the April 6 issue of the journal Science. The research was sponsored by the Defense Advanced Research Projects Agency (DARPA), the National Science Foundation (NSF), and the Emory-Georgia Tech Center of Cancer Nanotechnology Excellence.
The nanogenerators take advantage of the unique coupled piezoelectric and semiconducting properties of zinc oxide nanostructures, which produce small electrical charges when they are flexed.
Fabrication begins with growing an array of vertically-aligned nanowires approximately a half-micron apart on gallium arsenide, sapphire or a flexible polymer substrate. A layer of zinc oxide is grown on top of substrate to collect the current. The researchers also fabricate silicon "zig-zag" electrodes, which contain thousands of nanometer-scale tips made conductive by a platinum coating.
The electrode is then lowered on top of the nanowire array, leaving just enough space so that a significant number of the nanowires are free to flex within the gaps created by the tips. Moved by mechanical energy such as waves or vibration, the nanowires periodically contact the tips, transferring their electrical charges. By capturing the tiny amounts of current produced by hundreds of nanowires kept in motion, the generators produce a direct current output in the nano-Ampere range.
Wang and his group members Xudong Wang, Jinhui Song and Jin Liu expect that with optimization, their nanogenerator could produce as much as 4 watts per cubic centimeter - based on a calculation for a single nanowire. That would be enough to power a broad range of nanometer-scale defense, environmental and biomedical applications, including biosensors implanted in the body, environmental monitors - and even nanoscale robots.
Nearly a year ago, in the April 14, 2006 issue of the journal Science, Wang's research team announced the concept behind the nanogenerators. At that time, the nanogenerator could harvest power from just one nanowire at a time by dragging the tip of an atomic force microscope (AFM) over it. Made of platinum-coated silicon, the tip served as a Schottky barrier, helping accumulate and preserve the electrical charge as the nanowire flexed - and ensuring that the current flowed in one direction.
With its multiple conducting tips similar to those of an AFM, the new zig-zag electrode serves as a Schottky barrier to hundreds or thousands of wires simultaneously, harvesting energy from the nanowire arrays.
"Producing the top electrode as a single assembly sets the stage for scaling up this technology," Wang said. "We can now see the steps involved in moving forward to a device that can power real nanometer-scale applications."
Before that happens, additional development will be needed to optimize current production. For instance, though nanowires in the arrays can be grown to approximately the same length - about one micron - there is some variation. Wires that are too short cannot touch the electrode to produce current, while wires that are too long cannot flex to produce electrical charge.
"We need to be able to better control the growth, density and uniformity of the wires," Wang said. "We believe we can make as many as millions or even billions of nanowires produce current simultaneously. That will allow us to optimize operation of the nanogenerator."
In their lab, the researchers aimed an ultrasound source at their nanogenerator to measure current output over slightly more than an hour. Though there is some fluctuation in output, the current flow was continuous as long as the ultrasonic generator was operating, Wang said.
To rule out other sources of the current measured, the researchers substituted carbon nanotubes - which are not piezoelectric - for the zinc oxide nanowires, and used a top electrode that was flat. In both cases, the resulting devices did not produce current.
Providing power for nanometer-scale devices has long been a challenge. Batteries and other traditional sources are too large, and tend to negate the size advantages of nanodevices. And since batteries contain toxic materials such as lithium and cadmium, they cannot be implanted into the body as part of biomedical applications.
Because zinc oxide is non-toxic and compatible with the body, the new nanogenerators could be integrated into implantable biomedical devices to wirelessly measure blood flow and blood pressure within the body. And they could also find more ordinary applications.
"If you had a device like this in your shoes when you walked, you would be able to generate your own small current to power small electronics," Wang noted. "Anything that makes the nanowires move within the generator can be used for generating power. Very little force is required to move them."
Georgia Institute of Technology Research News
Nanowire News and Current Nanowire Events RSSNew metamaterials that bend light backwards bring invisibility cloaks 1 step closer
Scientists at the University of California, Berkeley, have for the first time engineered 3-D materials that can reverse the natural direction of visible and near-infrared light, a development that could help form the basis for higher resolution optical imaging, nanocircuits for high-powered computers, and, to the delight of science-fiction and fantasy buffs, cloaking devices that could render objects invisible to the human eye.
A First in Integrated Nanowire Sensor Circuitry
Scientists at the U.S. Department of Energy's Lawrence Berkeley National Laboratory and the University of California at Berkeley have created the world's first all-integrated sensor circuit based on nanowire arrays, combining light sensors and electronics made of different crystalline materials. Their method can be used to reproduce numerous such devices with high uniformity.
"Nanosculpture" Could Enable New Types of Heat Pumps and Energy Converters
A new technique for growing single-crystal nanorods and controlling their shape using biomolecules could enable the development of smaller, more powerful heat pumps and devices that harvest electricity from heat.
Scientists demonstrate method for integrating nanowire devices directly onto silicon
Applied scientists at Harvard University in collaboration with researchers from the German universities of Jena, Gottingen, and Bremen, have developed a new technique for fabricating nanowire photonic and electronic integrated circuits that may one day be suitable for high-volume commercial production.
Copper nanowires grown by new process create long-lasting displays
A new low-temperature, catalyst-free technique for growing copper nanowires has been developed by researchers at the University of Illinois. The copper nanowires could serve as interconnects in electronic device fabrication and as electron emitters in a television-like, very thin flat-panel display known as a field-emission display.
Engineers make first 'active matrix' display using nanowires
Engineers have created the first "active matrix" display using a new class of transparent transistors and circuits, a step toward realizing applications such as e-paper, flexible color monitors and "heads-up" displays in car windshields.
Carbon nanotubes outperform copper nanowires as interconnects
Researchers at Rensselaer Polytechnic Institute have created a road map that brings academia and the semiconductor industry one step closer to realizing carbon nanotube interconnects, and alleviating the current bottleneck of information flow that is limiting the potential of computer chips in everything from personal computers to portable music players.
Assembly technique for tiny wires may eventually help detect cancer and other diseases
Bottom-up manufacturing may hold the key to production of tiny medical devices capable of testing for multiple molecules like viruses or cancer markers, according to an interdisciplinary team of Penn State researchers.
Chemists measure copper levels in zinc oxide nanowires
Chemists at the National Institute of Standards and Technology (NIST) have been the first to measure significant amounts of copper incorporated into zinc oxide (ZnO) nanowires during fabrication.
Fiber-based nanotechnology in clothing could harvest energy from physical movement
Nanotechnology researchers are developing the perfect complement to the power tie: a "power shirt" able to generate electricity to power small electronic devices for soldiers in the field, hikers and others whose physical motion could be harnessed and converted to electrical energy.
More Nanowire News Articles
 | Quantum Wells, Wires and Dots: Theoretical and Computational Physics of Semiconductor Nanostructures by Paul Harrison Quantum Wells, Wires and Dots Second Edition: Theoretical and Computational Physics of Semiconductor Nanostructures provides all the essential information, both theoretical and computational, for complete beginners to develop an understanding of how the electronic, optical and transport properties of quantum wells, wires and dots are calculated. Readers are lead through a series of simple... |
 | Nanowires and Nanobelts: Materials, Properties and Devices: Volume 1: Metal and Semiconductor Nanowires This two volume reference, Nanowires and Nanobelts: Materials, Properties and Devices, provides a comprehensive introduction to the field and reviews the current state of the research. Volume 1, Metal and Semiconductor Nanowires covers a wide range of materials systems, from noble metals (such as Au, Ag, Cu), single element semiconductors (such as Si and Ge), compound semiconductors (such as InP,... |
 | Metallic Chains / Chains of Metals, Volume 1 (Handbook of Metal Physics) by Michael Springborg, Yi Dong The present book describes a large variety of different types of chain systems (nanowires), including shorter chains that are artificially produced for instance in break-junction experiments, chains synthesized as guests inside the channels of a host crystal, crystalline chain compounds, organic polymers (synthetic metals), and charge-transfer salts, thus covering an unusual wealth of systems.... |
 | Nanotubes and Nanowires (RSC Nanoscience and Nanotechnology Series) by C. N. R. Rao, A. Govindaraj Research and literature on nanomaterials has exploded in volume in recent years. Nanotubes (both of carbon and inorganic materials) can be made in a variety of ways, and they demonstrate a wide range of interesting properties. Many of these properties, such as high mechanical strength and interesting electronic properties relate directly to potential applications. Nanowires have been made from... |
 | Optics of Nanostructured Materials (Wiley Series in Lasers and Applications) Some of the most exciting developments in the optics and processing of nanostructured materials can be found in applied science and engineering. The topics covered in this book are at the cutting edge of... |
 | Nanotubes and Nanowires (Selected Topics in Electronics and Systems) (Selected Topics in Electronics and Systems) The field of nanotubes and nanowires is evolving at a rapid pace, with many potential applications in electronics, optics, and sensors, to name a few. In this book, various prominent researchers summarize our current understanding of these new materials systems, as well as some of these potential applications. A snapshot of the state-of-the-art in the field of nanowires and nanotubes, the... |
 | The Physics of Low-Dimensional Structures: From Quantum Wells to DNA and Artificial Atoms by Georgios P. Triberis |
| Droplet studies lead unexpectedly to nanowires.(Processing And Characterization): An article from: Nanoparticle News This digital document is an article from Nanoparticle News, published by Business Communications Company, Inc. on December 1, 2003. The length of the article is 629 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web... | |
| CONDUCTORS/DIELECTRICS: Nanowire Resistance Research Findings.: An article from: Electronic Materials Update This digital document is an article from Electronic Materials Update, published by Business Communications Company, Inc. on March 1, 2003. The length of the article is 489 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web... | |
| Nanoparticles and Nanowire Building Blocks--Synthesis, Processing, Characterization and Theory: Symposium Held April 13-16, 2004, San Francisco, Calif |
| © 2008 BrightSurf.com |