Brightsurf Science News and Current Science News Events
 
Email a Friend Send to a friend
Printer Friendly Print New methods and tools needed to measure exposure to airborne nanomaterials

New methods and tools needed to measure exposure to airborne nanomaterials

April 18, 2007

WASHINGTON, DC—New methods and tools for measuring exposure to airborne engineered nanomaterials will be required to protect the health of workers in nanotechnology-related jobs— estimated to total 10 million people by 2014—according to two occupational health experts writing in the inaugural issue of the journal Nanotoxicology.

The article, "Assessing Exposure to Airborne Nanomaterials: Current Abilities and Future Requirements," written by Andrew Maynard, chief science advisor at the Wilson Center's Project on Emerging Nanotechnologies, and Robert Aitken, director of strategic consulting at the Institute of Occupational Medicine (Edinburgh, UK), can be viewed online at http://www.nanotoxicology.net.




"Airborne engineered nanomaterials present complex exposure measurement challenges," Maynard said. "Conventional approaches—measuring the mass of airborne material—will not always be sufficient. This presents a challenge because studies have indicated that, on a mass-for-mass basis, certain nanometer-scale particles may be more toxic than larger particles with a similar composition. In other words, smaller particles may be more harmful than conventional thinking would lead us to believe."

Maynard and Aitken reduced the incredibly diverse set of possible engineered nanoparticles into nine distinct categories, ranging from very simple spherical particles to complex multifunctional particles. By pairing these categories with particle properties associated with potential health effects, they teased out possible monitoring approaches for each particle-property combination.

"What our analysis shows is that in the complex new 'nano world' there is no single or simple method for monitoring nanoaerosol exposures in order to assess and manage potential health effects," Aitken explained. "There are instruments that present partial solutions to the measurement challenges we face. But at the end of the day, we lack the tools and devices that are sophisticated, cost-effective and fast enough to do the job."

Maynard and Aitken conclude that current approaches of measuring the number of particles in a volume of air, surface areas, and mass concentration, will all be useful to some degree. However, further research is needed to identify which is most important for specific nanomaterials and which measurement methods are most effective.

The authors advocate developing a new "universal aerosol monitor" capable of providing detailed information on the nature of airborne engineered nanomaterials to which people are exposed. Maynard, Aitken and 12 other experts included development of such a versatile measurement tool among five grand challenges that they viewed as essential to achieving the safe handling of nanotechnology in an article that appeared in the November 16, 2006 issue of the journal Nature.

The proposed wearable sampling device would measure aerosol number, surface area, and concentration mass simultaneously and would be low cost. Today, stand-alone instruments can perform the individual types of measurements called for by Maynard and Aitken. "Bringing these technologies together into a single package within the size and cost parameters discussed does present a significant challenge," they write.

"An economical integrated device will empower small and large nanotechnology industries alike to reduce uncertainty over what their workers are exposed to, and enable them to develop safer working environments" said Maynard. "This will require targeted research into developing new methodologies and new instruments. But the rapid advancement and commercialization of nanotechnologies are leading to the need for effective—if not necessarily perfect—exposure measurement approaches and devices to be developed as soon as possible."

In 2005, nanotechnology was incorporated into $30 billion in manufactured goods—a number predicted to grow to $2.6 trillion in annual manufactured goods by 2014. Already, there are almost 400 manufacturer-identified nanotechnology-based consumer products on the market—ranging from computer chips to automobile parts and from clothing to cosmetics and dietary supplements (see: www.nanotechproject.org/consumerproducts).

Nanotechnology is the ability to measure, see, manipulate and manufacture things usually between 1 and 100 nanometers. A nanometer is one billionth of a meter; a human hair is roughly 100,000 nanometers wide.

Project on Emerging Nanotechnologies



Related Nanomaterials News Articles Nanomaterials News and Current Nanomaterials Events RSS Nanomaterials News and Current Nanomaterials Events RSS
Cool! Nanoparticle research points to energy savings
Adding just the right dash of nanoparticles to standard mixes of lubricants and refrigerants could yield the equivalent of an energy-saving chill pill for factories, hospitals, ships, and others with large cooling systems, suggest the latest results from National Institute of Standards and Technology (NIST) research that is pursuing promising formulations.

Cancer drug delivery research at Case Western Reserve University cuts time from days to hours
Researchers at Case Western Reserve University have developed a technique that has the potential to deliver cancer-fighting drugs to diseased areas within hours, as opposed to the two days it currently takes for existing delivery systems.

Nanotech: A regulatory blueprint for the next administration
Nanotechnology will significantly change virtually every facet of the way we live. The next president has the opportunity to shape these changes and to ensure that nanotechnology's benefits will be maximized and its risks identified and controlled.

"Nanosculpture" Could Enable New Types of Heat Pumps and Energy Converters
A new technique for growing single-crystal nanorods and controlling their shape using biomolecules could enable the development of smaller, more powerful heat pumps and devices that harvest electricity from heat.

New ORNL process brings nanoparticles into focus
Scientists can study the biological impacts of engineered nanomaterials on cells within the body with greater resolution than ever because of a procedure developed by researchers at the Department of Energy's Oak Ridge National Laboratory.

Microwave synthesis connects with the (quantum) dots
Materials researchers at the National Institute of Standards and Technology (NIST) have developed a simplified, low-cost process for producing high-quality, water-soluble "quantum dots" for biological research.

Research measures movement of nanomaterials in simple model food chain
New research shows that while engineered nanomaterials can be transferred up the lowest levels of the food chain from single celled organisms to higher multicelled ones, the amount transferred was relatively low and there was no evidence of the nanomaterials concentrating in the higher level organisms.

Nanoparticles assemble by millions to encase oil drops
In a development that could lead to new technologies for cleaning up oil spills and polluted groundwater, scientists at Rice University have shown how tiny, stick-shaped particles of metal and carbon can trap oil droplets in water by spontaneously assembling into bag-like sacs.

Manufactured Buckyballs don't harm microbes that clean the environment
Even large amounts of manufactured nanoparticles, also known as Buckyballs, don't faze microscopic organisms that are charged with cleaning up the environment, according to Purdue University researchers.

As nanotech goes mainstream, 'toxic socks' raise concerns
Nanotechnology is now available in a store near you. Valued for it's antibacterial and odor-fighting properties, nanoparticle silver is becoming the star attraction in a range of products from socks to bandages to washing machines. But as silver's benefits propel it to the forefront of consumer nanomaterials, scientists are recommending a closer examination of the unforeseen environmental and health consequences of nanosilver.
More Nanomaterials News Articles


Nanochemistry: A Chemical Approach to Nanomaterials
by Geoffrey A. Ozin, Andre C. Arsenault

"... [A] gem in the scientific literature". Michael W. Pitcher, Science, 21 July 2006 International interest in nanoscience research has flourished in recent years, as it becomes an integral part in the development of future technologies. The diverse, interdisciplinary nature of nanoscience means effective communication between disciplines is pivotal in the successful utilization of the...



Nanostructures & Nanomaterials: Synthesis, Properties & Applications
by Guozhong Cao

This important book focuses on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of...



Introduction to Nanoscience
by Gabor L. Hornyak, H.F. Tibbals, Joydeep Dutta, Anil Rao

Tomorrow’s nanoscientist will have a truly interdisciplinary and nano-centric education, rather than, for example, a degree in chemistry with a specialization in nanoscience. For this to happen, the field needs a truly focused and dedicated textbook. This full-color masterwork is such a textbook. It introduces the nanoscale along with the societal impacts of nanoscience, then presents an...



Nanomaterials Chemistry: Recent Developments and New Directions

With this handbook, the distinguished team of editors has combined the expertise of leading nanomaterials scientists to provide the latest overview of this field. They cover the whole spectrum of nanomaterials, ranging from theory, synthesis, properties, characterization to application, including such new developments as quantum dots, nanoparticles, nanoporous materials, nanowires, nanotubes, and...



Nanomaterials: Synthesis, Properties and Applications, Second Edition

Nanomaterials: Synthesis, Properties and Applications provides a comprehensive introduction to nanomaterials, from how to make them to example properties, processing techniques, and applications. Contributions by leading international researchers and teachers in academic, government, and industrial institutions in nanomaterials provide an accessible guide for newcomers to the field. The coverage...



Springer Handbook of Nanotechnology

Since 2004 the Springer Handbook of Nanotechnology has established itself as the definitive reference in the nanoscience and nanotechnology area. It integrates the knowledge from nanofabrication, nanodevices, nanomechanics, Nanotribology, materials science, and reliability engineering in just one volume. Beside the presentation of nanostructures, micro/nanofabrication, and micro/nanodevices,...



Materials Chemistry
by Bradley D. Fahlman

Winner of a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA)!'Excellent, up-to-date discussion of many classes of materials. Concisely written, understandable with integration of real-world and historical references. Well-illustrated with judicious use of color. Extensive research sections for further study. As a biochemist/chemical educator, I found the text...



Nanostructures and Nanomaterials: Synthesis, Properties & Applications
by Guozhong Cao

This important book focuses on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of...



Nanostructured Materials: Processing, Properties and Applications, 2nd Edition

Nanostructured materials are one of the highest profile classes of materials in science and engineering today, and will continue to be well into the future. Potential applications are widely varied, including washing machine sensors, drug delivery devices to combat avian flu, and more efficient solar panels. Broad and multidisciplinary, the field includes multilayer films, atomic clusters,...



Nanomaterials Handbook

  Even before it was identified as a science and given a name,  nanotechnology was the province of the most innovative inventors. In medieval times, craftsmen, ingeniously employing nanometer-sized gold particles, created the enchanting red hues found in the gold ruby glass of cathedral windows. Today, nanomaterials are being just as creatively used to improve old products, as well as usher in...

© 2008 BrightSurf.com