Science Current Events | Science News | Brightsurf.com
 
Email a Friend Send to a friend
Printer Friendly Print UCLA scientists design new super-hard material

UCLA scientists design new super-hard material

April 23, 2007

Ultra-hard materials are used for everything from drills that bore for oil and build new roads to scratch-resistant coatings for precision instruments and the face of your watch.

UCLA scientists are now reporting a promising new approach to designing super-hard materials, which are very difficult to scratch or crack. Their findings appear in the April 20 issue of the journal Science.




Diamond is the hardest material known, because its carbon atoms form very short covalent bonds, according to co-author Richard B. Kaner, UCLA professor of inorganic chemistry and materials science and engineering. Most of the diamond used in the world is actually synthetic and very expensive. Diamond powder is used for oil drills and machines that build roads and cut holes in mountains. Diamond cannot be used, however, to cut steel without ruining the diamond blade.

Cubic boron nitride is a diamond substitute used to cut steel; it is made synthetically under very high-temperature, high-pressure conditions, and is even more expensive than diamond, Kaner said.

There are two ways to make super-hard materials that are "ultra-incompressible," meaning they are resistant to shape deformation, which is a necessary condition for hardness: One is to imitate diamond by using carbon and combining it with boron or nitrogen to maintain short bonds; the other is to look for metals that are already incompressible and try to make them hard, said Kaner. He and his colleagues are developing the second approach.

"Our idea is to combine an incompressible metal, which happens to be soft, with short covalent bonds to make it hard," said Kaner, who is a member of the California NanoSystems Institute (CNSI) at UCLA, which encourages cross-disciplinary collaboration to solve problems in nanoscience and nanotechnology.

In 2005, Kaner's research team combined the relatively soft element osmium, the most incompressible metal known, with small covalent-bond forming atoms to make a material that is almost as incompressible as diamond, yet is so hard that it scratches sapphire, which is ranked 9 on a hardness scale of 1 to 10).

"We found that if we combine boron with osmium, we push the osmium atoms apart by only 10 percent from where they were in osmium metal, which is very good; you want to push them apart as little as possible," Kaner said. "Then we searched through the transition metals to see if we could do better than osmium, to get an expansion of less than 10 percent. The only metal we could find that had the potential for doing this is rhenium; hence, we made rhenium diboride.

Rhenium is a fairly dense, soft metal, which is next to osmium on the periodic table of chemical elements.

"We formed short covalent bonds, pushing the rheniums apart by just 5 percent from where they were in rhenium metal, making it both incompressible and very hard. The rhenium-rhenium distance expanded by only 5 percent from the metal — that's the key to this Science paper. Rhenium diboride is as incompressible as diamond in one direction, and in the other direction, just slightly more compressible."

At low applied forces, the hardness of rhenium diboride is equivalent to cubic boron nitride, the second-hardest material known, Kaner said. At higher applied forces, rhenium diboride is a little bit below that.

"Our material is hard enough to scratch diamond, and much harder than osmium diboride," he said.

While other super-hard materials, including diamond and cubic boron nitride, are made under expensive, high-pressure conditions, "our material is made in a simple process without applying pressure," Kaner said.

Speaking of the collaboration, Kaner said, "The reason I came to UCLA, and a reason I love this place, is because whatever you do — in my own case, whenever you make a new material — you often need equipment and expertise that you don't have. At UCLA, there will be an expert in that area who has the equipment, and every time I've asked, everybody is happy to help you do experiments and excited to collaborate with you.

University of California-Los Angeles



Related Diamond Current Events and Diamond News Articles Diamond Current Events and Diamond News RSS Diamond Current Events and Diamond News RSS
New hydrogen-storage method discovered
Scientists at the Carnegie Institution have found for the first time that high pressure can be used to make a unique hydrogen-storage material.

UCSB physicists move 1 step closer to quantum computing
Physicists at UC Santa Barbara have made an important advance in electrically controlling quantum states of electrons, a step that could help in the development of quantum computing.

Can we 'learn to see?': Study shows perception of invisible stimuli improves with training
Although we assume we can see everything in our field of vision, the brain actually picks and chooses the stimuli that come into our consciousness.

Aggressive microdermabrasion induces wound-healing response in aging skin
Microdermabrasion using a coarse diamond-studded instrument appears to induce molecular changes in the skin of older adults that mimic the way skin is remodeled during the wound healing process.

For future superconductors, a little bit of lithium may do hydrogen a lot of good
Scientists have a long and unsuccessful history of attempting to convert hydrogen to a metal by squeezing it under incredibly high and steady pressures.

How the 100th protein structure solved at Diamond impacts our understanding of how insects smell
New research announced today, Wednesday 30th September, by a team of leading scientists working with the UK's national Synchrotron, Diamond Light Source, could have a significant impact on the development and refinement of new eco-friendly pest control methods for worldwide agriculture.

Diamonds may be the ultimate MRI probe, say Quantum physicists
Diamonds, it has long been said, are a girl's best friend. But a research team including a physicist from the National Institute of Standards and Technology (NIST) has recently found that the gems might turn out to be a patient's best friend as well.

Diamonds are a laser's best friend
Tomorrow's lasers may come with a bit of bling, thanks to a new technology that uses man-made diamonds to enhance the power and capabilities of lasers.

Hydrocarbons in the deep Earth?
The oil and gas that fuels our homes and cars started out as living organisms that died, were compressed, and heated under heavy layers of sediments in the Earth's crust. Scientists have debated for years whether some of these hydrocarbons could also have been created deeper in the Earth and formed without organic matter.

Tiny diamonds on Santa Rosa Island give evidence of cosmic impact
Nanosized diamonds found just a few meters below the surface of Santa Rosa Island off the coast of Santa Barbara provide strong evidence of a cosmic impact event in North America approximately 12,900 years ago.
More Diamond Current Events and Diamond News Articles
14k White Gold, Round, Diamond Stud Earrings (1/2 cttw, J-K Color, I2-I3 Clarity)

14k White Gold, Round, Diamond Stud Earrings (1/2 cttw, J-K Color, I2-I3 Clarity)
by Amazon.com Collection

Add a touch of class to your wardrobe with these genuine diamond stud earrings. This versatile pair features round diamonds (1/2 cttw) cradled in four-prong settings of radiant and durable 14 karat white gold. The white gold setting complements the diamonds beautifully. The perfect accent for day or night, these earrings are set on posts with friction backs.

10k White Gold, Round, Diamond Stud Earrings (1/10 cttw, J-K Color, I2-I3 Clarity)

10k White Gold, Round, Diamond Stud Earrings (1/10 cttw, J-K Color, I2-I3 Clarity)
by Amazon.com Collection

Diamond studs are a true wardrobe staple--a classic accessory that looks right in any setting. Each earring in this elegant pair showcases a single round-cut diamond, held securely in a four-prong setting of 10 karat white gold. The diamonds have a total weight of 1/10 carat and are featured on posts with friction back closures. Flirty and eye-catching, these earrings are an affordable luxury that will add a bright touch to any outfit.

Certified Diamond (Round, Very Good cut, 6.21 carats, G color, VS2 clarity)

Certified Diamond (Round, Very Good cut, 6.21 carats, G color, VS2 clarity)
by Amazon.com Collection



14k White Gold, Princess-Cut, Diamond Classic 4-Prong Pendant (1/10 cttw, J-K Color, I2-I3 Clarity)

14k White Gold, Princess-Cut, Diamond Classic 4-Prong Pendant (1/10 cttw, J-K Color, I2-I3 Clarity)
by Amazon.com Collection

A very edgy look is this your style? Beautiful day or night a piece you will wear again and again.

Platinum Sapphire and Diamond Necklace VAN CLEEF & ARPELS

Platinum Sapphire and Diamond Necklace VAN CLEEF & ARPELS
by VCA

This gorgeous magnificent necklace by VAN CLEEF & ARPELS suspending a detachable pendant set with a cushion-cut sapphire within a two-tiered circular-cut diamond surround, to the circular and pear-shaped diamond cluster top, from a necklace of oval and cushion-cut sapphires, each within a circular-cut diamond surround, spaced by circular and pear-shaped diamond foliate clusters, mounted in platinum. Necklace coming with similar design brooch by VAN CLEEF & ARPELS set with a pear-shaped sapphire, weighing approximately 7.08 ct, within a circular, marquise and pear-shaped diamond three-tiered surround, mounted in platinum, with pendant hoop for suspension. So, this brooch could be placed instead of small pendant or could be worn separately. Detachable cluster top from necklace also could be...

Three Stone Round Brilliant Diamond Ring 1/3ctw (GH/I1) in 14K White Gold -Size 5

Three Stone Round Brilliant Diamond Ring 1/3ctw (GH/I1) in 14K White Gold -Size 5
by Diamond-Me



10k White Gold Diamond 3-Stone Heart Pendant (1/10 cttw, I-J Color, I2-I3 Clarity), 18"

10k White Gold Diamond 3-Stone Heart Pendant (1/10 cttw, I-J Color, I2-I3 Clarity), 18"
by Amazon.com Collection



10k White Gold Black Diamond Infinity Pendant (1/4 cttw)

10k White Gold Black Diamond Infinity Pendant (1/4 cttw)
by Amazon.com Collection

Black and white diamonds spiral down this graceful infinity pendant. Crafted in 10 karat white gold, it has a beautiful interwoven design that forms three marquise-shaped loops. A total of 50 black and white diamonds (1/4 cttw) are prong-set along the front of the pendant. These include .13 carat of black diamonds and .12 carat of white diamonds (I-J color, I3 clarity). The pendant dangles below a diamond-accented triangle bale. A delicate 18-inch rope chain completes the design.

10k White Gold, Princess-Cut, Diamond Stud Earrings (1/10 cttw, J-K Color, I2-I3 Clarity)

10k White Gold, Princess-Cut, Diamond Stud Earrings (1/10 cttw, J-K Color, I2-I3 Clarity)
by Amazon.com Collection

Diamond studs are a true wardrobe staple--a classic accessory that looks right in any setting. Each earring in this elegant pair showcases a single princess-cut diamond, held securely in a four-prong setting of 10 karat white gold. The diamonds have a total weight of 1/10 carat and are featured on posts with friction back closures. Flirty and eye-catching, these earrings are an affordable luxury that will add a bright touch to any outfit.

Yellow Gold Overlay Sterling Silver Sapphire Flowers w/ Diamond Accent Bracelet, 7.5"

Yellow Gold Overlay Sterling Silver Sapphire Flowers w/ Diamond Accent Bracelet, 7.5"
by Amazon.com Collection

Acccent your wrist with this beautiful floral motif bracelet, made from polished gold-plated sterling silver. Graceful polished swirls and dark blue sapphires in round and marquise shapes create an elegant pattern that wraps the wrist. The bracelet measures 7 1/2 inches and fastens securely with a box clasp and double safety bars.

© 2009 BrightSurf.com