 |
|
Nanotechnology provides 'green' path to environmentally sustainable economy
April 26, 2007WASHINGTON, DC - As products made with nanometer-scale materials and devices spread to more industries and markets, there is a growing opportunity and responsibility to leverage nanotechnology to reduce pollution, conserve resources and, ultimately, build a "clean" economy, advises a new report from the Project on Emerging Nanotechnologies.
A "strong marriage" between nanotechnology and the principles and practices of green chemistry and green engineering "holds the key to building an environmentally sustainable society in the 21st century," concludes Green Nanotechnology: It's Easier Than You Think. Summarizing proceedings at a national American Chemical Society symposium and four workshops held in 2006, the new report was authored by science writer Karen Schmidt for the Project on Emerging Nanotechnologies, an initiative of the Woodrow Wilson International Center for Scholars and The Pew Charitable Trusts.
The report explores potentially beneficial links between nanotechnology - essentially, science and engineering practiced on the molecular scale - and green chemistry and engineering, which aim to minimize environmental impacts through resource-conserving and waste-eliminating improvements in processes and products. It concludes with recommendations for proactive federal policy measures to help the fast developing field of nanotechnology to "grow up" green.
The report cites examples of research progress toward using nanotechnology to accomplish environmental goals in combination with commercial or other objectives. "With greater ability to manipulate matter and tailor properties, it should be possible to make products and processes with reduced toxicity, increased durability and improved energy efficiency," according to the report.
For example, James Hutchison, a University of Oregon chemist, uses DNA molecules in a novel process that holds promise for building nanoscale patterns on silicon chips and other surfaces. The experimental method saves materials and requires less water and solvent than the traditional printing - or lithography - techniques used in the deceptively resource-intensive electronics industry. Other researchers are investigating nanoscale approaches to replace lead and other toxic materials in electronics manufacturing.
Chemist Vicki Colvin and her Rice University colleagues have discovered that 12-nanometer magnetic nanoparticles can remove better than 99 percent of the arsenic in a solution, while their counterparts at Oklahoma State University have engineered nanoscale sensors that can detect pollutants at the level of parts per billion.
Nanotechnology has opened promising new routes for making inexpensive solar cells as well as improving the performance and lowering the cost of fuel cells, eyed as the energy source for cars and trucks of the future. At the same time, work at the nanoscale is leading toward tools for removing toxic materials and cleaning up hazardous waste sites.
"Nanotechnology potentially is a 'doubly green dream.' It offers us the opportunity to make products and processes 'green' from the beginning," explained Barbara Karn, an environmental scientist who helped organize the green nanotechnology programs while with the Project on Emerging Nanotechnologies. "It also allows us to substitute more environmentally-friendly chemicals, materials and manufacturing processes for older, more polluting ones."
The report defines four categories in which nanotechnology applications and environmental interests intersect:
* Fostering new nanotechnology-enabled products and processes that are environmentally benign - or "clean and green";
* Managing nanomaterials and their production to minimize potential environmental, health, and safety risks;
* Using nanotechnology to clean up toxic waste site and other legacy pollution problems; and
* Substituting green nanotechnology products for existing products that are less environmentally friendly.
"We think the United States is on track to be a global leader in green nanotech," said David Rejeski, director of the Project on Emerging Nanotechnologies. "The country's research and development portfolio should be directed toward this goal. We believe green nanotechnology can not only help protect the environment but also be a source of American jobs and company profits in the future."
Looking ahead, beyond legacy environmental problems of today, the report suggests that the most effective approach to protecting the environment would be to "develop green nano policies that actively promote pollution prevention."
Ranging from developing metrics for evaluating bottom-line environmental impacts to using federal procurement to foster demand for green nanoproducts, the recommended policy steps outlined in the report would help to ensure that the $8.3 billion taxpayer investment in nanotechnology, since the U.S. National Nanotechnology Initiative was established in 2001, pays off for the country and the environment.
"We are on an unsustainable path," said Paul Anastas, director of the American Chemical Society's Green Chemistry Institute. "It is not as though nanotechnology will be an option; it is going to be essential for coming up with sustainable technologies."
Project on Emerging Nanotechnologies
The report cites examples of research progress toward using nanotechnology to accomplish environmental goals in combination with commercial or other objectives. "With greater ability to manipulate matter and tailor properties, it should be possible to make products and processes with reduced toxicity, increased durability and improved energy efficiency," according to the report.
For example, James Hutchison, a University of Oregon chemist, uses DNA molecules in a novel process that holds promise for building nanoscale patterns on silicon chips and other surfaces. The experimental method saves materials and requires less water and solvent than the traditional printing - or lithography - techniques used in the deceptively resource-intensive electronics industry. Other researchers are investigating nanoscale approaches to replace lead and other toxic materials in electronics manufacturing.
Chemist Vicki Colvin and her Rice University colleagues have discovered that 12-nanometer magnetic nanoparticles can remove better than 99 percent of the arsenic in a solution, while their counterparts at Oklahoma State University have engineered nanoscale sensors that can detect pollutants at the level of parts per billion.
Nanotechnology has opened promising new routes for making inexpensive solar cells as well as improving the performance and lowering the cost of fuel cells, eyed as the energy source for cars and trucks of the future. At the same time, work at the nanoscale is leading toward tools for removing toxic materials and cleaning up hazardous waste sites.
"Nanotechnology potentially is a 'doubly green dream.' It offers us the opportunity to make products and processes 'green' from the beginning," explained Barbara Karn, an environmental scientist who helped organize the green nanotechnology programs while with the Project on Emerging Nanotechnologies. "It also allows us to substitute more environmentally-friendly chemicals, materials and manufacturing processes for older, more polluting ones."
The report defines four categories in which nanotechnology applications and environmental interests intersect:
* Fostering new nanotechnology-enabled products and processes that are environmentally benign - or "clean and green";
* Managing nanomaterials and their production to minimize potential environmental, health, and safety risks;
* Using nanotechnology to clean up toxic waste site and other legacy pollution problems; and
* Substituting green nanotechnology products for existing products that are less environmentally friendly.
"We think the United States is on track to be a global leader in green nanotech," said David Rejeski, director of the Project on Emerging Nanotechnologies. "The country's research and development portfolio should be directed toward this goal. We believe green nanotechnology can not only help protect the environment but also be a source of American jobs and company profits in the future."
Looking ahead, beyond legacy environmental problems of today, the report suggests that the most effective approach to protecting the environment would be to "develop green nano policies that actively promote pollution prevention."
Ranging from developing metrics for evaluating bottom-line environmental impacts to using federal procurement to foster demand for green nanoproducts, the recommended policy steps outlined in the report would help to ensure that the $8.3 billion taxpayer investment in nanotechnology, since the U.S. National Nanotechnology Initiative was established in 2001, pays off for the country and the environment.
"We are on an unsustainable path," said Paul Anastas, director of the American Chemical Society's Green Chemistry Institute. "It is not as though nanotechnology will be an option; it is going to be essential for coming up with sustainable technologies."
Project on Emerging Nanotechnologies
Nanotechnology News and Current Nanotechnology Events RSSScientists peel away the mystery behind gold's catalytic prowess
Few materials have exercised as much of a hold on the human imagination, or on human history, as has gold.
Scientists grow 'nanonets' able to snare added energy transfer
Using two abundant and relatively inexpensive elements, Boston College chemists have produced nanonets, a flexible webbing of nano-scale wires that multiplies surface area critical to improving the performance of the wires in electronics and energy applications.
Creating unconventional metals
The semiconductor silicon and the ferromagnet iron are the basis for much of mankind's technology, used in everything from computers to electric motors. In this week's issue of the journal Nature (August 21st) an international group of scientists, including academic and industrial researchers from the UK, USA and Lesotho, report that they have combined these elements with a small amount of another common metal, manganese, to create a new material which is neither a magnet nor an ordinary semiconductor.
New 'nano-positioners' may have atomic-scale precision
Engineers have created a tiny motorized positioning device that has twice the dexterity of similar devices being developed for applications that include biological sensors and more compact, powerful computer hard drives.
University of Pennsylvania Scientists Move Optical Computing Closer to Reality
Scientists at the University of Pennsylvania have theorized a way to increase the speed of pulses of light that bound across chains of tiny metal particles to well past the speed of light by altering the particle shape.
True properties of carbon nanotubes measured
For more than 15 years, carbon nanotubes (CNTs) have been the flagship material of nanotechnology. Researchers have conceived applications for nanotubes ranging from microelectronic devices to cancer therapy. Their atomic structure should, in theory, give them mechanical and electrical properties far superior to most common materials.
Slipping through cell walls, nanotubes deliver high-potency punch to cancer tumors in mice
The problem with using a shotgun to kill a housefly is that even if you get the pest, you'll likely do a lot of damage to your home in the process. Hence the value of the more surgical flyswatter.
Nano vaccine for hepatitis B shows promise for third world
Chronic hepatitis B infects 400 million people worldwide, many of them children. Even with three effective vaccines available, hepatitis B remains a stubborn, unrelenting health problem, especially in Africa and other developing areas.
UNC study: shape, not just size, impacts effectiveness of emerging nanomedicine therapies
In the budding field of nanotechnology, scientists already know that size does matter. But now, researchers at the University of North Carolina at Chapel Hill have shown that shape matters even more - a finding that could lead to new and more effective methods for treating cancer and other diseases, from diabetes and multiple sclerosis to arthritis and obesity.
A world-leading UK science project switches on first neutrons
The UK's ISIS Second Target Station Project moved a major step closer to completion today when the first neutrons were created in the ISIS Second Target Station.
More Nanotechnology News Articles
 | Closing the Innovation Gap: Reigniting the Spark of Creativity in a Global Economy by Judy Estrin Does innovation come about by luck or hard work? Is it a flash of inspiration or the result of careful management? Are innovators born or taught? In Closing the Innovation Gap, Judith Estrin provides the answers to these and other questions critical to our future. A technology pioneer and business leader, Estrin describes what will be required to reignite the spark of innovation in business,... |
 | The Singularity Is Near: When Humans Transcend Biology by Ray Kurzweil For over three decades, Ray Kurzweil has been one of the most respected and provocative advocates of the role of technology in our future. In his classic The Age of Spiritual Machines, he argued that computers would soon rival the full range of human intelligence at its best. Now he examines the next step in this inexorable evolutionary process: the union of human and machine, in which the... |
 | The Diamond Age: Or, a Young Lady's Illustrated Primer (Bantam Spectra Book) by Neal Stephenson John Percival Hackworth is a nanotech engineer on the rise when he steals a copy of "A Young Lady's Illustrated Primer" for his daughter Fiona. The primer is actually a super computer built with nanotechnology that was designed to educate Lord Finkle-McGraw's daughter and to teach her how to think for herself in the stifling neo-Victorian society. But Hackworth loses the primer before he can give... |
 | Seeing What's Next: Using Theories of Innovation to Predict Industry Change by Clayton M. Christensen, Erik A. Roth, Scott D. Anthony When a disruptive innovation is launched, it changes the entire industry and every firm operating within in This book argues that it is possible to predict which companies will win and which will lose in a specific situation—and provides a practical framework for doing so. Most books on innovation—including Christensen’s previous two books—approached innovation from... |
 | The First Patient by Michael Palmer From the blockbuster, New York Times bestselling author comes a high-concept, high-octane thriller at the crossroads of presidential politics and cutting-edge medicine. . . .Gabe Singleton and Andrew Stoddard were roommates at the Naval Academy in Annapolis years ago. Today, Gabe is a country doctor and his friend Andrew has gone from war hero to governor to President of the United States. One... |
 | Medici Effect: What Elephants and Epidemics Can Teach Us About Innovation by Frans Johansson Why do so many world-changing insights come from people with little or no related experience? Charles Darwin was a geologist when he proposed the theory of evolution. And it was an astronomer who finally explained what happened to the dinosaurs. Frans Johansson’s The Medici Effect shows how breakthrough ideas most often occur when we bring concepts from one field into a new, unfamiliar... |
 | Immortality by Kevin Bohacz The first transhuman has already been born. Present day and life as we know it has just taken a quick left turn. Evolution is operating in ways no one could have imagined and environmental damage may be the catalyst. In some of the remote and unnoticed places of the world, small pockets of death begin occurring. As the isolated extinctions spread, the world's eyes focus on this terrible... |
 | Open Business Models: How to Thrive in the New Innovation Landscape by Henry Chesbrough In his landmark book Open Innovation, Henry Chesbrough demonstrated that because useful knowledge is no longer concentrated in a few large organizations, business leaders must adopt a new, “open” model of innovation. Using this model, companies look outside their boundaries for ideas and intellectual property (IP) they can bring in, as well as license their unutilized home-grown IP to... |
 | Subject To Change: Creating Great Products & Services for an Uncertain World: Adaptive Path on Design (Adaptive Path) by Peter Merholz, Todd Wilkens, Brandon Schauer, David Verba "Short, but powerful. Easy to read, yet profound. I've been searching for just this book: the one perfect book that summarizes the essence of modern product design. This is it. The lessons are as powerful as they are simple: The product is NOT the goal. Successful products are systems. Focus on the experience. This requires empathy, agile product management, real understanding of the target... |
 | Making Innovation Work: How to Manage It, Measure It, and Profit from It by Tony Davila, Marc J. Epstein, Robert Shelton "To compete effectively, you must innovate: Not just once, but consistently, in all your products, services, and business functions. But, profitable innovation doesn't just ""happen."" It must be managed, measured, executed on¿and few companies do that well. Making Innovation Work offers the first real solution: A start-to-finish process for driving growth from innovation. The authors draw on... |
| © 2008 BrightSurf.com |