 |
|
MIT researchers probe bones' tiny building blocks
May 25, 2007In work that could lead to more effective diagnoses and treatments of bone diseases using only a pinhead-sized sample of a patient's bone, MIT researchers report a first-of-its-kind analysis of bone's mechanical properties.
The work, reported in the May 21 advance online edition of Nature Materials, sheds new light on how bone absorbs energy.
The researchers' up-close-and-personal look at bone probes its fundamental building block--a corkscrew-shaped protein called collagen embedded with tiny nanoparticles of mineral--at the level of tens of nanometers, or billionths of a meter. A human hair, by comparison, is 80,000 nanometers in diameter.
"If you want to investigate the origins of the strength and toughness of a material, you probe it at smaller and smaller length scales," said co-author Subra Suresh, Ford Professor of Engineering, with appointments in materials science and engineering, biological engineering, mechanical engineering and the Harvard-MIT Division of Health Sciences and Technology. "The methodologies used in this research can be employed to assess the quality of bone with extremely high precision by providing new and detailed structural and mechanical information on the nature of its fundamental constituents."
The insights gained from the work could also lead to the creation of new, tougher materials, he said.
The study was led by Christine Ortiz, associate professor of materials science and engineering. "The structure, quality and integrity of bone change dramatically with age and disease, hence understanding the origins of the mechanical properties of this major load-bearing, structural tissue in our body is extremely important from a medical standpoint," Ortiz said.
Using a table-top instrument called a molecular force probe, which uses an extremely small probe tip to poke out a tiny fragment of bone, Ortiz and colleagues mapped the stiffness of bovine shin bone into complex, colorful, two-dimensional contour maps similar to those used by geographers.
The team found that the mechanical properties of bone vary greatly within a single region only two micrometers (thousandths of a meter) wide. Because a variety of disorders tied to disease or aging lead to changes in bone structure, the researchers' discovery of the non-uniformity of bone's mechanical properties at very small length scales could lead to improved diagnoses of diseases. For example, if specific nanoscale patterns of stiffness within bone structure are tied to disease or aging, these could potentially be identified earlier or provide more conclusive evidence of a disorder.
The researchers also formulated a computer model to study the effects of their experimental results on larger-scale biomechanical properties. For example, using the model they found that the non-uniform stiffness patterns were advantageous to bone's ability to absorb energy.
"We tend to think that if a material is non-uniform, it is not as tough," Suresh said. "This work shows otherwise. Our thesis is that nature, by making bones non-uniform at extremely small length scales over the course of millions of years of evolution, has designed bone to be able to absorb much more energy than a uniform material with the same properties."
"I was surprised that we observed such beautiful and complex patterns," Ortiz said. "Cells sense and respond to stresses in their environment. Since different local mechanical properties in bone change the magnitude of stresses around the cell, the cells' behavior can be altered in response, thereby affecting the health of the tissue."
In addition, the team's results could lead to new ways of producing improved structural composites that mimic nature's clever design that allows bones to resist sudden fractures; to "fail gracefully," as Suresh put it. For example, certain kinds of a new class of materials called nanocomposites are composed of a polymer or metallic matrix filled with nanoscale particles randomly distributed or periodically spaced. "There may be ways to disperse particles non-uniformly that may lead to improved material toughness," Suresh said.
Ortiz' and Suresh's colleagues on the work are Kuangshin Tai, a recent MIT Ph.D. graduate; research scientist Ming Dao of the Department of Materials Science and Engineering; and Ahmet Palazoglu of the University of California at Davis.
Ortiz is currently looking at stem-cell-based, tissue-engineered bone in collaboration with Dan Gazit at the Hebrew University of Jerusalem to see how similar it is to native bone. She is also applying the new analysis and related imaging and simulation techniques to different types of mineralized biological materials such as armored scales from ancient fish and seashells.
This work was supported by the Whitaker Foundation, the U.S. Army Research Office, the MIT Institute for Soldier Nanotechnologies and the National Institutes of Health.
Massachusetts Institute of Technology
"If you want to investigate the origins of the strength and toughness of a material, you probe it at smaller and smaller length scales," said co-author Subra Suresh, Ford Professor of Engineering, with appointments in materials science and engineering, biological engineering, mechanical engineering and the Harvard-MIT Division of Health Sciences and Technology. "The methodologies used in this research can be employed to assess the quality of bone with extremely high precision by providing new and detailed structural and mechanical information on the nature of its fundamental constituents."
The insights gained from the work could also lead to the creation of new, tougher materials, he said.
The study was led by Christine Ortiz, associate professor of materials science and engineering. "The structure, quality and integrity of bone change dramatically with age and disease, hence understanding the origins of the mechanical properties of this major load-bearing, structural tissue in our body is extremely important from a medical standpoint," Ortiz said.
Using a table-top instrument called a molecular force probe, which uses an extremely small probe tip to poke out a tiny fragment of bone, Ortiz and colleagues mapped the stiffness of bovine shin bone into complex, colorful, two-dimensional contour maps similar to those used by geographers.
The team found that the mechanical properties of bone vary greatly within a single region only two micrometers (thousandths of a meter) wide. Because a variety of disorders tied to disease or aging lead to changes in bone structure, the researchers' discovery of the non-uniformity of bone's mechanical properties at very small length scales could lead to improved diagnoses of diseases. For example, if specific nanoscale patterns of stiffness within bone structure are tied to disease or aging, these could potentially be identified earlier or provide more conclusive evidence of a disorder.
The researchers also formulated a computer model to study the effects of their experimental results on larger-scale biomechanical properties. For example, using the model they found that the non-uniform stiffness patterns were advantageous to bone's ability to absorb energy.
"We tend to think that if a material is non-uniform, it is not as tough," Suresh said. "This work shows otherwise. Our thesis is that nature, by making bones non-uniform at extremely small length scales over the course of millions of years of evolution, has designed bone to be able to absorb much more energy than a uniform material with the same properties."
"I was surprised that we observed such beautiful and complex patterns," Ortiz said. "Cells sense and respond to stresses in their environment. Since different local mechanical properties in bone change the magnitude of stresses around the cell, the cells' behavior can be altered in response, thereby affecting the health of the tissue."
In addition, the team's results could lead to new ways of producing improved structural composites that mimic nature's clever design that allows bones to resist sudden fractures; to "fail gracefully," as Suresh put it. For example, certain kinds of a new class of materials called nanocomposites are composed of a polymer or metallic matrix filled with nanoscale particles randomly distributed or periodically spaced. "There may be ways to disperse particles non-uniformly that may lead to improved material toughness," Suresh said.
Ortiz' and Suresh's colleagues on the work are Kuangshin Tai, a recent MIT Ph.D. graduate; research scientist Ming Dao of the Department of Materials Science and Engineering; and Ahmet Palazoglu of the University of California at Davis.
Ortiz is currently looking at stem-cell-based, tissue-engineered bone in collaboration with Dan Gazit at the Hebrew University of Jerusalem to see how similar it is to native bone. She is also applying the new analysis and related imaging and simulation techniques to different types of mineralized biological materials such as armored scales from ancient fish and seashells.
This work was supported by the Whitaker Foundation, the U.S. Army Research Office, the MIT Institute for Soldier Nanotechnologies and the National Institutes of Health.
Massachusetts Institute of Technology
Mechanical Properties Current Events and Mechanical Properties News RSSAdult stem cell breakthrough
The first tissue-engineered trachea (windpipe), utilising the patient's own stem cells, has been successfully transplanted into a young woman with a failing airway. The bioengineered trachea immediately provided the patient with a normally functioning airway, thereby saving her life.
Super-Tough Sunshield to Fly on the James Webb Space Telescope
Imagine sunglasses that can withstand the severe cold and heat of space, a barrage of radiation and high-speed impacts from small space debris. They don't exist, but Northrop Grumman engineers have created a Sunshield for NASA's James Webb Space Telescope that can withstand all of those elements. The space telescope needs a Sunshield to block heat from the sun so its cameras and instruments can operate properly a million miles from the Earth, when it launches in 2013.
MIT: Mending broken hearts with tissue engineering
Broken hearts could one day be mended using a novel scaffold developed by MIT researchers and colleagues.
Engineering Nanoparticles for Maximum Strength
Because they are riddled with defects, bulk crystalline materials never achieve their ideal strength; nanocrystals, on the other hand, are so small there's no room for defects.
New Graphene-Based Material Clarifies Graphite Oxide Chemistry
A new "graphene-based" material that helps solve the structure of graphite oxide and could lead to other potential discoveries of the one-atom thick substance called graphene, which has applications in nanoelectronics, energy storage and production, and transportation such as airplanes and cars, has been created by researchers at The University of Texas at Austin.
True properties of carbon nanotubes measured
For more than 15 years, carbon nanotubes (CNTs) have been the flagship material of nanotechnology. Researchers have conceived applications for nanotubes ranging from microelectronic devices to cancer therapy. Their atomic structure should, in theory, give them mechanical and electrical properties far superior to most common materials.
Trees, forests and the Eiffel tower reveal theory of design in nature
What do a tree and the Eiffel Tower have in common? According to a Duke University engineer, both are optimized for flow. In the case of trees, the flow is of water from the ground throughout the trunk, branches and leaves, and into the air. The Eiffel Tower's flow carries stresses throughout the structure without collapsing under its own weight or being downed by the wind.
The shape of things to come
Instead of using a flat microchip as the light sensor for their new camera, a team of engineers has developed a sensor that is a flexible mesh of wire-connected pixels.
Toothpick: New molecular tag IDs bone and tooth minerals
Enlisting an army of plant viruses to their cause, materials researchers at the National Institute of Standards and Technology (NIST) have identified a small biomolecule that binds specifically to one of the key crystal structures of the body-the calcium compound that is the basic building block of teeth and bone. With refinements, the researchers say, the new molecule can be a highly discriminating probe for a wide range of diagnostic and therapeutic applications related to bones and teeth.
The fight for the best quantum bit (qubit)
Our results give us, for the first time, the possibility to understand the interaction between just two electrons placed next to each other in a carbon nanotube.
More Mechanical Properties Current Events and Mechanical Properties News Articles
 | An Introduction to the Mechanical Properties of Solid Polymers by I. M. Ward, J. Sweeney Provides a comprehensive introduction to the mechanical behaviour of solid polymers. Extensively revised and updated throughout, the second edition now includes new material on mechanical relaxations and anisotropy, composites modelling, non-linear viscoelasticity, yield behaviour and fracture of tough polymers. The accessible approach of the book has been retained with each chapter... |
 | Concise Encyclopedia of the Mechanical Properties of Materials by J W Martin This Concise Encyclopedia draws its material from the award-winning Encyclopedia of Materials: Science and Technology, and includes updates and revisions not available in the original set. Mechanical properties describe the response of a material to an applied strain. Elastic behaviour is encountered at small strains, followed by plastic strain which is usually followed by fracture. If the... |
 | Mechanical Properties of Polymers and Composites (Mechanical Engineering (Marcell Dekker)) by Nielsen This text, now in its second edition, offers an up-to-date, expanded treatment of the behaviour of polymers with regard to material variables and test and use conditions. It highlights general principles, useful empirical rules and practical equations.;Detailing the specific behaviour of many common polymers, the text: places emphasis on time and frequency dependence over temperature dependence;... |
| Biomechanics, Mechanical Properties of Living Tissues by Y C Fung | |
 | Ceramics: Mechanical Properties, Failure Behaviour, Materials Selection (Springer Series in Materials Science) by Dietrich Munz, Theo Fett Ceramic materials are widely used as components in a great variety of applications. They are attractive due to their good high temperature strength, high wear resistance, good corrosion resistance and other special physical properties. Their major drawback is their brittleness and the large scatter of mechanical properties. This book describes failure phenomena in ceramic materials under... |
| Physical and mechanical properties of plants, fertilizers, and soils | |
 | Mechanical Behavior of Materials (3rd Edition) by Norman E Dowling This respected handbook introduces the entire spectrum of mechanical behavior of materials, emphasizing practical engineering methods for testing structural materials to obtain their properties, and predicting their strength and life when used for machines, vehicles, and structures. Features expanded discussions ofsafety factors, stress and strain, bending and torsion tests, unknown fiber... |
 | Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue (2nd Edition) by Norman E. Dowling Praised by readers for its usefulness, this book covers the entire area of mechanical behavior of materials from a practical engineering viewpoint, providing a single-source introductory analysis with specific coverage on materials testing, yield criteria, stress-based fatigue, fracture mechanics, crack growth, strain-based fatigue, and creep. Explains test methods and the principles behind them,... |
 | Mechanical Behavior of Materials by William F. Hosford This textbook is for courses on Mechanical Behavior of Materials taught in departments of Mechanical Engineering and Materials Science. The text includes numerous examples and problems for student practice. The book emphasizes quantitative problem solving. End of the chapter notes are included to increase students' interest. This text differs from others because the treatment of plasticity has... |
 | Mechanical Properties of Engineered Materials (Mechanical Engineering (Marcell Dekker)) by Wole Soboyejo Featuring in-depth discussions on tensile and compressive properties, shear properties, strength, hardness, environmental effects, and creep crack growth, Mechanical Properties of Engineered Materials considers computation of principal stresses and strains, mechanical testing, plasticity in ceramics, metals, intermetallics, and polymers, materials selection for thermal shock resistance, the... |
| © 2008 BrightSurf.com |