 |
|
Carnegie Mellon U. chemists advance organic semiconductor processing
June 27, 2007Work with innovative materials improves understanding, design of plastic electronics
PITTSBURGH-Any machinist will tell you that a little grease goes a long way toward making a tool work better. And that may soon hold true for plastic electronics as well.
Carnegie Mellon University chemists have found that grease can make some innovative plastics vastly better electrical conductors. This discovery, published June 25 in Advanced Materials (www3.interscience.wiley.com/cgi-bin/fulltext/114282726/PDFSTART), outlines a chemical process that could become widely adopted to produce the next generation of tiny switches for transistors in radio frequency identification tags, flexible screen displays, and debit or key cards.
"This research brings us closer to developing organic semiconductors with electrical and physical properties far superior to those that exist today," said principal investigator Richard D. McCullough, professor of chemistry and dean of the Mellon College of Science at Carnegie Mellon. "We were surprised and amazed with our findings." The new process involves adding a little grease in two ways, say the investigators. The first step involves chemically combining an inherently conducting polymer (ICP) with a grease-like chemical. The second step involves depositing this hybrid material - called a block copolymer - onto a greased platform.
On the surface layer of a transistor, ICPs make good electrical conductors that provide the switch element for a transistor to turn on and off. But ICPs are by nature brittle. To counter this brittleness, scientists chemically link ICPs with grease-like, elastic polymers to make block copolymers.
"These block copolymers are very promising for creating future materials, such as lightweight, thin composite films for ebook readers that you could roll up like today's newspapers," said Genevieve Sauvé, a research associate who conducted the latest research under conditions similar to a commercial production setting.
While they provide much-needed flexibility, elastic polymers insulate rather than conduct electricity. Block copolymers that contain grease-like polymers are less effective electrical conductors than pure ICPs. Yet in the right processing setting, the opposite can hold true, the Carnegie Mellon scientists now report. It just depends how you treat a transistor's silicon dioxide base layer.
As part of the current study, the Carnegie Mellon team tested four block copolymers, each with a different ratio of insulating elastic polymer to conducting polymer. When they applied thin films of these different polymers to untreated silicon dioxide, they found the greater the overall amount of insulating polymer in the final film, the worse that film performed in conducting an electric charge. The result is a flexible switch layer that doesn't work very well.
But when the scientists pretreated the transistor's silicon dioxide platform with OTS-8 - a chemical that creates a grease-like coating - they found that transistors incorporating any of the four block copolymers conducted an electric charge with remarkable ease, even when the insulating polymer constituted more than half of the applied block copolymer.
"Something amazing is happening at the molecular interface between our block copolymer and the OTS-8-treated surface so the block copolymers self-assemble with great precision," Sauvé said. "In fact, we think that the grease-like, insulating polymer in the material and the grease-coated surface both somehow exert important effects in driving this self-assembly."
Block copolymers with up to 57 percent insulating polymer performed 10 times better on OTS-8-treated surfaces than they did on untreated surfaces, according to the investigators. More importantly, the block copolymers were nearly equal in their performance to ICPs alone on treated surfaces, according to McCullough.
"This is the first report that copolymers are good organic semiconductors," McCullough said. "These results mean that we could soon design devices that are both flexible and highly functional."
OTS-8 appears to help the block copolymers assemble into nanowires that are much more highly organized than those that self-assemble on untreated silicon dioxide, according to Sauvé. (See available images)
The Carnegie Mellon team used block copolymers containing ICPs called regioregular polythiophenes (rr-P3HTs), which were initially described by McCullough in 1992. In subsequent research, McCullough's laboratory has developed cost-efficient methods to produce rr-P3HTs so they can be put into solution and sprayed onto surfaces using ink-jet printing. McCullough has also shown that rr-3PHTs can be modified to attach to different surfaces. By chemically linking rr-P3HTs with other elastic polymers, McCullough's group has also produced conductive plastics with a range of physical properties that could suit different device applications.
The insulating, elastic polymer used in this latest work is poly(methylacrylate), or PMA. Sauvé is using this system to evaluate nanowire assembly and conductive properties of block copolymers made with polymers other than PMA. These additional polymers are being developed by research scientist Mihaela Iovu in McCullough's lab.
Eventually, Sauvé says, polymer chemists could replace a silicon dioxide base with a flexible plastic so consumers could roll up plastic displays.
Carnegie Mellon University
"This research brings us closer to developing organic semiconductors with electrical and physical properties far superior to those that exist today," said principal investigator Richard D. McCullough, professor of chemistry and dean of the Mellon College of Science at Carnegie Mellon. "We were surprised and amazed with our findings." The new process involves adding a little grease in two ways, say the investigators. The first step involves chemically combining an inherently conducting polymer (ICP) with a grease-like chemical. The second step involves depositing this hybrid material - called a block copolymer - onto a greased platform.
On the surface layer of a transistor, ICPs make good electrical conductors that provide the switch element for a transistor to turn on and off. But ICPs are by nature brittle. To counter this brittleness, scientists chemically link ICPs with grease-like, elastic polymers to make block copolymers.
"These block copolymers are very promising for creating future materials, such as lightweight, thin composite films for ebook readers that you could roll up like today's newspapers," said Genevieve Sauvé, a research associate who conducted the latest research under conditions similar to a commercial production setting.
While they provide much-needed flexibility, elastic polymers insulate rather than conduct electricity. Block copolymers that contain grease-like polymers are less effective electrical conductors than pure ICPs. Yet in the right processing setting, the opposite can hold true, the Carnegie Mellon scientists now report. It just depends how you treat a transistor's silicon dioxide base layer.
As part of the current study, the Carnegie Mellon team tested four block copolymers, each with a different ratio of insulating elastic polymer to conducting polymer. When they applied thin films of these different polymers to untreated silicon dioxide, they found the greater the overall amount of insulating polymer in the final film, the worse that film performed in conducting an electric charge. The result is a flexible switch layer that doesn't work very well.
But when the scientists pretreated the transistor's silicon dioxide platform with OTS-8 - a chemical that creates a grease-like coating - they found that transistors incorporating any of the four block copolymers conducted an electric charge with remarkable ease, even when the insulating polymer constituted more than half of the applied block copolymer.
"Something amazing is happening at the molecular interface between our block copolymer and the OTS-8-treated surface so the block copolymers self-assemble with great precision," Sauvé said. "In fact, we think that the grease-like, insulating polymer in the material and the grease-coated surface both somehow exert important effects in driving this self-assembly."
Block copolymers with up to 57 percent insulating polymer performed 10 times better on OTS-8-treated surfaces than they did on untreated surfaces, according to the investigators. More importantly, the block copolymers were nearly equal in their performance to ICPs alone on treated surfaces, according to McCullough.
"This is the first report that copolymers are good organic semiconductors," McCullough said. "These results mean that we could soon design devices that are both flexible and highly functional."
OTS-8 appears to help the block copolymers assemble into nanowires that are much more highly organized than those that self-assemble on untreated silicon dioxide, according to Sauvé. (See available images)
The Carnegie Mellon team used block copolymers containing ICPs called regioregular polythiophenes (rr-P3HTs), which were initially described by McCullough in 1992. In subsequent research, McCullough's laboratory has developed cost-efficient methods to produce rr-P3HTs so they can be put into solution and sprayed onto surfaces using ink-jet printing. McCullough has also shown that rr-3PHTs can be modified to attach to different surfaces. By chemically linking rr-P3HTs with other elastic polymers, McCullough's group has also produced conductive plastics with a range of physical properties that could suit different device applications.
The insulating, elastic polymer used in this latest work is poly(methylacrylate), or PMA. Sauvé is using this system to evaluate nanowire assembly and conductive properties of block copolymers made with polymers other than PMA. These additional polymers are being developed by research scientist Mihaela Iovu in McCullough's lab.
Eventually, Sauvé says, polymer chemists could replace a silicon dioxide base with a flexible plastic so consumers could roll up plastic displays.
Carnegie Mellon University
Copolymers Current Events and Copolymers News RSSBerkeley Researchers Find New Route to Nano Self-Assembly
If the promise of nanotechnology is to be fulfilled, nanoparticles will have to be able to make something of themselves. An important advance towards this goal has been achieved by researchers with the U.S. Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) who have found a simple and yet powerfully robust way to induce nanoparticles to assemble themselves into complex arrays.
Pluronic L-81 is a potential anti-diabetic drug?
Pluronic surfactants are synthetic copolymers based on ethylene oxide and propylene oxide.
Self-assembling polymer arrays improve data storage potential
A new manufacturing approach holds the potential to overcome the technological limitations currently facing the microelectronics and data-storage industries, paving the way to smaller electronic devices and higher-capacity hard drives.
New Chlorine-Tolerant, Desalination Membrane Hopes to Boost Access to Clean Water
A chemical engineering professor at The University of Texas at Austin is part of a team that has developed a chlorine-tolerant membrane that should simplify the water desalination process, increasing access to fresh water and possibly reducing greenhouse gases.
NIST team develops novel method for nanostructured polymer thin films
All researchers at the National Institute of Standards and Technology (NIST) wanted was a simple, quick method for making thin films of block copolymers or BCPs (chemically distinct polymers linked together) in order to have decent samples for taking measurements important to the microelectronics industry.
New synthetic self-assembling macromolecules mimic nature
We take "self-assembly" for granted when it is carried out by the biopolymers which are our hair, teeth, or skin. But when scientists devise new ways for molecules to self assemble into new materials, it is an important achievement.
Virginia Tech chemists create new polymers by adding DNA base pairs
Chemists at Virginia Tech are creating new polymers by adding DNA base pairs. Attributes include improved stretchable behavior and self-healing polymer films and coatings.
Sandia experimental package of piezoelectric films to be part of NASA space station experiment
For the past three years a Sandia research team headed by Mat Celina has been investigating the performance of various piezoelectric polymer films that might one day serve as ultra-light mirrors in space telescopes.
From 2-D blueprint, material assembles into novel 3-D nanostructures
An international team of scientists affiliated with the University of Wisconsin-Madison Nanoscale Science and Engineering Center has coaxed a self-assembling material into forming never-before-seen, three-dimensional nanoscale structures, with potential applications ranging from catalysis and chemical separation to semiconductor manufacturing.
New polymers for applications in nanopatterning and nanolithography
The Cidetec Technological Centre continues to invest in nanotechnology development with its participation in the European NAPA (Emerging Nanopatterning Methods) project. The research institution is directing a working subgroup to develop new thermoplastic polymers for applications in nanopatterning and nanolithography.
More Copolymers Current Events and Copolymers News Articles
 |
Block Copolymers: Synthetic Strategies, Physical Properties, and Applications by Nikos Hadjichristidis (Author), Stergios Pispas (Author), George Floudas (Author) Polymers may be classified as either homopolymers, consisting of one single repeating unit, or copolymers, consisting of two or more distinct repeating units. Block copolymers contain long contiguous blocks of two or more repeating units in the same polymer chain. Covering one of the hottest topics in polymer chemistry, Block Copolymers provides a coherent overview of the synthetic routes, physical properties, and applications of block copolymers. This pioneering text provides not only a guideline for developing synthetic strategies for creating block copolymers with defined characteristics, but also a key to the relationship between the physical properties of block copolymers and the structure and dynamics of materials. Covering features of the chemistry and physics of block... |
 |
Celcon Acetal Copolymer "Push to Connect" - Reducing Union, 5/16" x 1/4" by Small Parts These innovative Push to Connect O.D. fittings are easy to install. Simply push the tubing into the fitting and installation is complete. These fittings are made for semi-rigid tubingand hard wall tubing. Connections are leak proof and have no flow restrictions. Fittings have a working pressure up to 150 psi and a full vacuum rating. The body is made of Celcon Acetal Copolymer. O-rings are made from and F.D.A. sanctioned formulation of Nitrile Rubber. Each fitting comes with collet covers to prevent accidental disconnection. |
 |
Kershaw Pink DWO Knife with AUS6A Stainless-Steel Blade and Pink Injection-Molded Co-Polymer Handle by Kershaw Get a grip on one of Kershaw's hardest working pocketknives. It's the D.W.O. Classic, a small but mighty clip-blade knife that weighs in at less than 2 ounces and takes up just over 3 inches of space when closed. Our newest D.W.O. is the D.W.O. Pink. And while the pink color is just plain fun, the durable co-polymer handle serves a very practical purpose. It provides a comfortable grip and non-slip control in most any outdoor condition, from desert hot and dry to monsoon wet. The lock back design makes it safe to use and is easy to release when you want to close the knife. The D.W.O. even has a built-in slot to hold a lanyard. The work-tough D.W.O. is the ideal companion for pocket, glove compartment, toolbox, or truck box. All feature the Kershaw comfortable co-polymer handle for a... |
 |
Pelican Protector Case 1150 with Pick 'N Pluck Foam - Case - copolymer - yellow by Pelican Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high-density foam of the case for total subjection and protection against impact, vibration or shock. |
 |
6 Compartment Cafeteria Tray Co-Polymer, 2x2, All Rectangular Compartments by Cambro Cambro 1596CP Unique design lets you fit two trays side by side in a standard dishwasher tray rack. Saves water and cuts dishwashing time in half. Gradual slope compartment walls promote faster drying. Easy grip handles provide a secure grip for child |
 |
Boston Acoustics Pro50 SE 5-1/4" component speaker system by Boston Acoustics component speaker system includes two woofers, two tweeters, two external crossovers * 5-1/4" copolymer woofer with rubber surround and cast aluminum basket * 1" Type-M1 anodized alloy dome tweeter with axis-, flush-, and surface-mount options * dockable crossover with bi-wire and bi-amp options * power range: 2-125 watts RMS (250 watts peak power) * |
 |
^Rectangular Wash Basins - 6-quart, Copolymer, 9 1/4" x 11 3/4" x 4 1/2" - Mauve Min.Order is 1 CS ( 50 Each / Case; ) by MEDLINE INDUSTRIES Equally accommodating for limb soaking. Rolled rim makes carrying easy and the soap dish accessory can be clipped on for added convenience. Plastic. Rectangular Wash Basins Feature a Large Soaking Area That's Ideal for Bed Baths 50 Each / Case; |
 |
ProFlex 200 Short Light Duty Copolymer Knee Pad , Black by Proflex |
 |
Natural Minimal Surfaces: via Theory and Computation |
 |
Statistical, Gradient, Block and Graft Copolymers by Controlled/Living Radical Polymerizations (Advances in Polymer Science) by Krzysztof Matyjaszewski (Author), Kelly A. Davis (Author) This review is focused on controlled/living radical polymerization methods for the preparation of various copolymers. A brief introduction to the subject of radical polymerization, and early attempts to control it, is followed by a detailed examination of the literautre on controlled/living radical copolymerizations from the mid-90's until 2001. The topics covered include statistical/gradient, block, graft, and star copolymers and the polymerization methods used to produce them. These copolymers were prepared using three major controlled radical methods (either nitroxide mediated polymerization, atom transfer radical polymerization or degenerative transfer) and a combination of polymerization techniques, including transformation chemistry or the simultaneous/dual living polymerizations,... |
| © 2009 BrightSurf.com |