 |
|
Federal research plan to determine nanotech risks fails to deliver
September 14, 2007Lack of government risk research strategy jeopardizes success of technology
WASHINGTON, DC-Almost a year in the making, a federal plan to prioritize research on the potential environmental, health, and safety (EHS) impacts of nanoscale materials has so many failings that its begs the question as to whether the government's 13-agency nanotechnology research effort is able to deliver an effective risk research strategy, according to David Rejeski, head of the Wilson Center's Project on Emerging Nanotechnologies.
"Currently, the federal nanotechnology risk research agenda is a bit like a ship without a captain, and it is unclear who has the responsibility to steer this ship in the right direction and make sure that it reaches its destination," Rejeski said in comments on the new government report, Prioritization of Environmental, Health, and Safety Research Needs for Engineered Nanoscale Materials. His full comments, along with those of project chief scientist Andrew Maynard, are available at www.nanotechproject.org.
Released for public review on August 16, the 8-page government report was prepared by a working group of the Nanoscale Science, Engineering, and Technology Subcommittee (NSET), part of the federal government's National Science and Technology Council. In September 2006, the same working group issued a list of nearly 70 EHS research needs necessitated by advances in nanotechnology and subsequent commercialization efforts. The new report responds to some 40 public comments on the "prioritization criteria" described in last year's document.
Although the new NSET report pares down the original listing to a shorter laundry list of 25 research activities, the end result is a "simplistic list of priorities," says Rejeski. Furthermore, he states: "It falls far short of the carefully crafted, prioritized federal nanotechnology EHS research plan urgently called for over the past two years by leaders from both parties in Congress, industry, investment firms, scientists and consumer groups. Notably absent are important details like budget allocations, implementation time frames, and assigned responsibilities. The report reflects the government's failure-after allotting over $8 billion for nanotechnology research since fiscal year 2001-to develop a coordinated, prioritized, and adequately funded program to characterize potential risks to human health and the environment associated with processes and products involving engineered nanomaterials."
In comments submitted to the NSET, Dr. Maynard said, "It remains hard to see how this report or subsequent planned activities will help to provide the information that industry, regulators, and the public need to ensure the safe development and use of nanotechnology."
In the project's submission to the NSET subcommittee, Maynard and Rejeski both questioned whether following the priorities listed in the document would yield information that policymakers and regulators need to ensure that existing and future nanotechnology products are safe and environmentally sustainable.
Rejeski advised that funding for nanotechnology-related EHS research be directed toward agencies which have or support regulatory missions, such as the Environmental Protection Agency, Food and Drug Administration, Department of Agriculture, Consumer Product Safety Commission, and the National Institute for Occupational Safety and Health. "If this document is truly meant to serve as a basis for a risk research strategy, there is a long way to go," Rejeski said.
In 2006, nanotechnology was incorporated into more than an estimated $50 billion in manufactured goods. More than 500 manufacturer-identified nanotechnology consumer products are on the market from cosmetics to automobile parts to children's toy stuffed animals (www.nanotechproject.org/consumerproducts). By 2014, an estimated $2.6 trillion in manufactured goods will use this technology.
"As the commercialization of increasingly sophisticated nanotechnologies gathers pace," Maynard said, "industry, regulators and the public need sound information, now more than ever, on which to base their decisions. They also need the assurance that there is a strategy in place to fill knowledge gaps about risks as fast and efficiently as possible."
Project on Emerging Nanotechnologies
Released for public review on August 16, the 8-page government report was prepared by a working group of the Nanoscale Science, Engineering, and Technology Subcommittee (NSET), part of the federal government's National Science and Technology Council. In September 2006, the same working group issued a list of nearly 70 EHS research needs necessitated by advances in nanotechnology and subsequent commercialization efforts. The new report responds to some 40 public comments on the "prioritization criteria" described in last year's document.
Although the new NSET report pares down the original listing to a shorter laundry list of 25 research activities, the end result is a "simplistic list of priorities," says Rejeski. Furthermore, he states: "It falls far short of the carefully crafted, prioritized federal nanotechnology EHS research plan urgently called for over the past two years by leaders from both parties in Congress, industry, investment firms, scientists and consumer groups. Notably absent are important details like budget allocations, implementation time frames, and assigned responsibilities. The report reflects the government's failure-after allotting over $8 billion for nanotechnology research since fiscal year 2001-to develop a coordinated, prioritized, and adequately funded program to characterize potential risks to human health and the environment associated with processes and products involving engineered nanomaterials."
In comments submitted to the NSET, Dr. Maynard said, "It remains hard to see how this report or subsequent planned activities will help to provide the information that industry, regulators, and the public need to ensure the safe development and use of nanotechnology."
In the project's submission to the NSET subcommittee, Maynard and Rejeski both questioned whether following the priorities listed in the document would yield information that policymakers and regulators need to ensure that existing and future nanotechnology products are safe and environmentally sustainable.
Rejeski advised that funding for nanotechnology-related EHS research be directed toward agencies which have or support regulatory missions, such as the Environmental Protection Agency, Food and Drug Administration, Department of Agriculture, Consumer Product Safety Commission, and the National Institute for Occupational Safety and Health. "If this document is truly meant to serve as a basis for a risk research strategy, there is a long way to go," Rejeski said.
In 2006, nanotechnology was incorporated into more than an estimated $50 billion in manufactured goods. More than 500 manufacturer-identified nanotechnology consumer products are on the market from cosmetics to automobile parts to children's toy stuffed animals (www.nanotechproject.org/consumerproducts). By 2014, an estimated $2.6 trillion in manufactured goods will use this technology.
"As the commercialization of increasingly sophisticated nanotechnologies gathers pace," Maynard said, "industry, regulators and the public need sound information, now more than ever, on which to base their decisions. They also need the assurance that there is a strategy in place to fill knowledge gaps about risks as fast and efficiently as possible."
Project on Emerging Nanotechnologies
Nanotechnology Current Events and Nanotechnology News RSSEngineers, doctors at UCLA develop novel material that could help fight arterial disease
A fortuitous discovery that grew out of a collaboration between UCLA engineers and physicians could potentially offer hope to the nearly 10 million Americans who suffer from peripheral arterial disease.
Nanowires key to future transistors, electronics
A new generation of ultrasmall transistors and more powerful computer chips using tiny structures called semiconducting nanowires are closer to reality after a key discovery by researchers at IBM, Purdue University and the University of California at Los Angeles.
New study confirms exotic electric properties of graphene
First, it was the soccer-ball-shaped molecules dubbed buckyballs. Then it was the cylindrically shaped nanotubes. Now, the hottest new material in physics and nanotechnology is graphene: a remarkably flat molecule made of carbon atoms arranged in hexagonal rings much like molecular chicken wire.
Behavior modification could ease concerns about nanoparticles
In an advance that could help ease health and environmental concerns about the emerging nanotechnology industry, scientists are reporting development of technology for changing the behavior of nanoparticles in municipal sewage treatment plants - their main gateway into the environment.
UT Knoxville and ORNL researchers turn algae into high-temperature hydrogen source
In the quest to make hydrogen as a clean alternative fuel source, researchers have been stymied about how to create usable hydrogen that is clean and sustainable without relying on an intensive, high-energy process that outweighs the benefits of not using petroleum to power vehicles.
Caltech scientists develop DNA origami nanoscale breadboards for carbon nanotube circuits
In work that someday may lead to the development of novel types of nanoscale electronic devices, an interdisciplinary team of researchers at the California Institute of Technology (Caltech) has combined DNA's talent for self-assembly with the remarkable electronic properties of carbon nanotubes, thereby suggesting a solution to the long-standing problem of organizing carbon nanotubes into nanoscale electronic circuits.
New 'finFET' promising for smaller transistors, more powerful chips
Purdue University researchers are making progress in developing a new type of transistor that uses a finlike structure instead of the conventional flat design, possibly enabling engineers to create faster and more compact circuits and computer chips.
Findings show nanomedicine promising for treating spinal cord injuries
Researchers at Purdue University have discovered a new approach for repairing damaged nerve fibers in spinal cord injuries using nano-spheres that could be injected into the blood shortly after an accident.
Magnetic nanoparticles to simultaneously diagnose, monitor and treat
Whether it's magnetic nanoparticles (mNPs) giving an army of 'therapeutically armed' white blood cells direction to invade a deadly tumour's territory, or the use of mNPs to target specific nerve channels and induce nerve-led behaviour (such as the life-dependant thumping of our hearts), mNPs have come a long way in the past decade.
Breakthrough in industrial-scale nanotube processing
Rice University scientists today unveiled a method for the industrial-scale processing of pure carbon-nanotube fibers that could lead to revolutionary advances in materials science, power distribution and nanoelectronics.
More Nanotechnology Current Events and Nanotechnology News Articles
 |
Nanotechnology For Dummies (For Dummies (Math & Science)) by Richard D. Booker (Author), Mr. Earl Boysen (Author) This title demystifies the topic for investors, business executives, and anyone interested in how molecule-sized machines and processes can transform our lives. Along with dispelling common myths, it covers nanotechnology's origins, how it will affect various industries, and the limitations it can overcome. This handy book also presents numerous applications such as scratch-proof glass, corrosion resistant paints, stain-free clothing, glare-reducing eyeglass coatings, drug delivery systems, medical diagnostic tools, burn and wound dressings, sugar-cube-sized computers, mini-portable power generators, even longer-lasting tennis balls, and more. Nanotechnology is the science of matter at the scale of one-billionth of a meter or 1/75,000th the size of a human hair Written in... |
 |
Nanotechnology: A Gentle Introduction to the Next Big Idea by Mark A. Ratner (Author), Daniel Ratner (Author) This book is the technical and business overview of tomorrow's scientific breakthrough. The authors survey the scientific research and business aspects of the field, try to explain the key concepts, provide a look at current developments, and give some thoughts on where nanotechnology is likely to go in the next few years. The book will be approachable and witty, with lots of illustrations and examples. The focus of the book is on science and technology, but business is discussed as well. The growing interest in nanotechnology by the investment community and the federal dollars going into nanotechnology are explained. Ratner and Ratner go on to explain why the National Science Foundation has estimated that it could be a $1 trillion market by 2015. Nanotechnology, or, as it is sometimes... |
 |
Understanding Nanotechnology by Scientific American (Author), editors at Scientific American (Author) Taken from the Greek, nano means 'one billionth part of' a whole; or very, very small. Nanotechnology is the next step after miniaturization. This book explores the cutting edge of a new technology that will find usage in almost every single aspect of modern society. |
 |
Soft Machines: Nanotechnology and Life by Richard A. L. Jones (Author) Enthusiasts look forward to a time when tiny machines reassemble matter and process information with unparalleled power and precision. But is their vision realistic? Where is the science heading? As nanotechnology (a new technology that many believe will transform society in the next on hundred years) rises higher in the news agenda and popular consciousness, there is a real need for a book which discusses clearly the science on which this technology will be based. While it is most easy to simply imagine these tiny machines as scaled-down versions of the macroscopic machines we are all familiar with, the way things behave on small scales is quite different to the way they behave on large scales. Engineering on the nanoscale will use very different principles to those we are used to in our... |
 |
Nanotechnology: Science, Innovation, and Opportunity by Lynn E. Foster (Author) Inside the Emerging Multibillion-Dollar Nanotechnology Industry
Suddenly, nanotechnology isn't science fiction or mere theory: It's becoming one of the world's fastest-growing, highest-impact industries. In Nanotechnology: Science, Innovation, and Opportunity, the field's leading experts offer an up-to-the-minute briefing on where the industry stands now, how it will unfold over the coming decade, and how it will impact you. Edited by a key industry advisor, this book covers the latest in nanotech science, technology, and applications. You'll meet the key players, and discover nanotech at work in fields ranging from drug delivery to energy efficiency. Here are the opportunities,... |
 |
Engines of Creation: The Coming Era of Nanotechnology by Eric Drexler (Author) This brilliant work heralds the new age of nanotechnology, which will give us thorough and inexpensive control of the structure of matter. Drexler examines the enormous implications of these developments for medicine, the economy, and the environment, and makes astounding yet well-founded projections for the future. |
 |
Nanophysics and Nanotechnology: An Introduction to Modern Concepts in Nanoscience (Physics Textbook) by Edward L. Wolf (Author) With the second edition of his highly successful textbook 'Nanophysics and Nanotechnology', the author has once more provided a unique, self-contained introduction to the physical concepts, techniques and applications of nanoscale systems by covering its entire spectrum from the latest examples right up to single-electron and molecular electronics. The book is basically at the level of an upper level undergraduate engineering or science student. New sections have been added on the use of DNA as an organizing stratagem in self-assembly, silicon nanowires, comments on the new success toward human cloning, the achievement of self-replication in a primitive set of electromechanical robots, recognition in the extra chapters of the acceleration toward alternative forms of nanoelectronics.... |
 |
Introduction to Nanotechnology by Charles P. Poole Jr. (Author), Frank J. Owens (Author) This self-confessed introduction provides technical administrators and managers with a broad, practical overview of the subject and gives researchers working in different areas an appreciation of developments in nanotechnology outside their own fields of expertise. |
 |
Nanofuture: What's Next For Nanotechnology by J. Storrs Hall (Author) Flying cars, space travel for everyone, the elimination of poverty and hunger, and powerful new tools to combat disease, and even aging. These are some of the amazing predicted developments of nanotechnology, the coming science of designing and building machines at the molecular and atomic levels. Will this new scientific revolution be for better or worse? Some commentators have described utopias; others have prophesied disaster. Find out the likely reality from an expert, Dr. J. Storrs Hall, in this absorbing insider’s guide to the near future. Dr. Hall—a leading researcher on the frontiers of nanotechnology who has designed for NASA—describes nanotechnology in a very accessible way, so that anyone can understand what it’s about, what it could do, and what it can’t do. He puts... |
 |
Nanotechnology Demystified by Linda Williams (Author), Wade Adams (Author) Get up to speed on nanotechnology and the many biological, chemical, physical, environmental, and political aspects of this developing science. |
| © 2009 BrightSurf.com |