 |
|
Toxic releases down from North American industry leaders, increasing from other facilities
October 18, 2007New Mexican data support first trinational analysis of pollutant release and transfers
The latest Taking Stock report from the Commission for Environmental Cooperation (CEC) reveals that a continued decline in releases of toxic chemicals to the environment-15 percent for the United States and Canada from 1998 to 2004-is being driven by a group of industrial facilities that are the largest generators of emissions.
The CEC report, however, also reveals that the leading role of the largest waste-producing facilities stands in stark contrast to a substantial increase in chemical releases and transfers by a much larger group of industrial facilities that report lower volumes of emissions.
Released today, the annual report compares industrial pollution from a matched set of facilities in Canada and the United States-three million tonnes of chemicals released or transferred in the two countries in 2004. Over one-third of that amount was released at the location of reporting facilities, including over 700,000 tonnes released to the air, with another third transferred to recycling. For the first time, the CEC report also provides data from Mexico. Across the three countries, metals and their compounds-lead, chromium, nickel and mercury-were reported by the highest proportion of facilities.
"The evidence is clear that industry and government action to limit chemical releases is showing steady progress," said Adrián Vázquez-Gálvez, CEC's executive director. "It is equally clear that a large number of small and medium-size industrial facilities need to do a better job in reducing their waste and emissions if we are going to see even greater progress in North America. We trust the progress shown by industry leaders and the fact that pollution prevention is a proven strategy will encourage everyone to tackle pollution issues at the source."
The CEC's analysis demonstrates that facilities from Canada and the United States that reported pollution prevention activities-product and process redesign, spill and leak detection, and substituting raw materials-showed reductions from 2002-2004. Facilities not engaged in these activities did not show similar progress.
A new chapter provides a detailed look at industrial recycling, finding that over one-third of US and Canadian releases and transfers reported in 2004-more than 1 million tonnes-were recycled. Recycling has increased in recent years due to increases in production and in scrap metal prices. Most of the materials were metals, including copper, zinc, lead and their compounds.
The trilateral analysis is based on matched data from some 9 industrial sectors, 56 chemicals, and 10,000 facilities, comparing releases and transfers for similar facilities in Canada, Mexico and the United States. The report identifies a different pattern of releases and transfers in each of the three countries.
Comparisons of the three countries' industrial emissions will continue to improve as the CEC works with governments, industry and NGOs to expand the number of chemicals and facilities that are comparable.
Taking Stock compiles data from Canada's National Pollutant Release Inventory, the United States' Toxics Release Inventory, and, starting with its first year of mandatory reporting in 2004, Mexico's pollutant release and transfer register, the Registro de Emisiones y Transferencia de Contaminantes.
Commission for Environmental Cooperation
Released today, the annual report compares industrial pollution from a matched set of facilities in Canada and the United States-three million tonnes of chemicals released or transferred in the two countries in 2004. Over one-third of that amount was released at the location of reporting facilities, including over 700,000 tonnes released to the air, with another third transferred to recycling. For the first time, the CEC report also provides data from Mexico. Across the three countries, metals and their compounds-lead, chromium, nickel and mercury-were reported by the highest proportion of facilities.
"The evidence is clear that industry and government action to limit chemical releases is showing steady progress," said Adrián Vázquez-Gálvez, CEC's executive director. "It is equally clear that a large number of small and medium-size industrial facilities need to do a better job in reducing their waste and emissions if we are going to see even greater progress in North America. We trust the progress shown by industry leaders and the fact that pollution prevention is a proven strategy will encourage everyone to tackle pollution issues at the source."
The CEC's analysis demonstrates that facilities from Canada and the United States that reported pollution prevention activities-product and process redesign, spill and leak detection, and substituting raw materials-showed reductions from 2002-2004. Facilities not engaged in these activities did not show similar progress.
A new chapter provides a detailed look at industrial recycling, finding that over one-third of US and Canadian releases and transfers reported in 2004-more than 1 million tonnes-were recycled. Recycling has increased in recent years due to increases in production and in scrap metal prices. Most of the materials were metals, including copper, zinc, lead and their compounds.
The trilateral analysis is based on matched data from some 9 industrial sectors, 56 chemicals, and 10,000 facilities, comparing releases and transfers for similar facilities in Canada, Mexico and the United States. The report identifies a different pattern of releases and transfers in each of the three countries.
Comparisons of the three countries' industrial emissions will continue to improve as the CEC works with governments, industry and NGOs to expand the number of chemicals and facilities that are comparable.
Taking Stock compiles data from Canada's National Pollutant Release Inventory, the United States' Toxics Release Inventory, and, starting with its first year of mandatory reporting in 2004, Mexico's pollutant release and transfer register, the Registro de Emisiones y Transferencia de Contaminantes.
Commission for Environmental Cooperation
Emissions Current Events and Emissions News RSSGlobal warming predictions are overestimated, suggests study on black carbon
A detailed analysis of black carbon -- the residue of burned organic matter -- in computer climate models suggests that those models may be overestimating global warming predictions.
Where there's wildfire smoke, there's toxicity
The health threat to city dwellers posed by Southern California wildfires like those of November 2008 may have been underestimated by officials.
Carbon dioxide already in danger zone, warns study
A group of 10 prominent scientists says that the level of globe-warming carbon dioxide in the air has probably already reached a point where world climate will change disastrously unless the level can be reduced in coming decades.
MIT: A quicker, easier way to make coal cleaner
Construction of new coal-fired power plants in the United States is in danger of coming to a standstill, partly due to the high cost of the requirement - whether existing or anticipated - to capture all emissions of carbon dioxide, an important greenhouse gas.
Burying the greenhouse gas
To prevent global warming, researchers and policymakers are exploring a variety of options to significantly cut the amount of carbon dioxide that reaches the atmosphere.
Acid Soils in Slovakia Tell Somber Tale
Increasing levels of nitrogen deposition associated with industry and agriculture can drive soils toward a toxic level of acidification, reducing plant growth and polluting surface waters, according to a new study published online in Nature Geoscience.
Nanoparticles trigger cell death?
Nanoparticles that are one milliard of a metre in size are widely used, for example, in cosmetics and food packaging materials.
U of Minnesota researchers uncover surprising effects of climate patterns in ancient China
University of Minnesota geology and geophysics researchers, along with their colleagues from China, have uncovered surprising effects of climate patterns on social upheaval and the fall of dynasties in ancient China.
World needs climate emergency backup plan, says expert
In submitted testimony to the British Parliament, climate scientist Ken Caldeira of the Carnegie Institution said that while steep cuts in carbon emissions are essential to stabilizing global climate, there also needs to be a backup plan.
Revised theory suggests carbon dioxide levels already in danger zone
If climate disasters are to be averted, atmospheric carbon dioxide (CO2) must be reduced below the levels that already exist today, according to a study published in Open Atmospheric Science Journal by a group of 10 scientists from the United States, the United Kingdom and France.
More Emissions Current Events and Emissions News Articles
 | Emissions Trading: Principles and Practice by T. H. Tietenberg First published in 1985, Emissions Trading was a comprehensive review of the first large-scale attempt to use economic incentives in environmental policy in the United States; since its publication it has consistently been one of the most widely cited works in the tradable permits literature. The second edition of this classic study of pollution reform considers how the use of transferable... |
 | Otoacoustic Emissions: Clinical Applications by Martin S., Ph.D. Robinette This is a multi-authored text, written by some of the most renowned experts in their respective fields. Of the 27 authors in the second edition, 11 are new. Many new chapters are included in this edition covering topics such as emission supression, calibration, differential diagnosis, and more! David Kemp, a pioneer in the field of otoacoustic emissions authors the lead chapter on the future of... |
 | Air Emissions from Animal Feeding Operations: Current Knowledge, Future Needs by Ad Hoc Committee on Air Emissions from Animal Feeding Operations, Committee on Animal Nutrition, National Research Council |
 | Acoustic Emission Testing: Basics for Research - Applications in Civil Engineering Acoustic Emission (AE) techniques have been studied in civil engineering for a long time. The techniques are recently going to be more and more applied to practical applications and to be standardized in the codes. This is because the increase of aging structures and disastrous damages due to recent earthquakes urgently demand for maintenance and retrofit of civil structures in service for... |
 | Positron Emission Tomography: Clinical Practice This text is based on the 2nd half of P.E. Valk et al's 2003 bestseller Positron Emission Tomography: Basic Science and Clinical Practice and deals with only the clinical research and applications. "Positron Emission Tomography: Clinical Practice" has 22 fully revised and updated chapters, enhanced by 6 completely new chapters. The abundance of new material makes this an essential volume for... |
 | Tracking Your Carbon Footprint: A Step-by-Step Guide to Understanding and Inventorying Greenhouse Gas Emissions by Judith R. Purman Knowing your carbon footprint is a hot button issue today. Consumers now expect their employers, government, and schools to embrace the notion that one's style of living can negatively affect the environment today and for future generations. Likewise, homeowners, businesses, and organizations are moving to more sustainable modes of operating, not just because it is the right thing to do, but... |
| The physical basis of polarized emission by P. P Feofilov | |
 | ICP Emission Spectrometry: A Practical Guide by Joachim Nölte All the essentials needed for successful ICP OES analyses. Using a clear and comprehensive style, the author introduces practitioners to ICP emission spectrometry, covering the basics as well as information on the instrumentation, instructions on how to develop methods and numerous concrete examples. The layout is extremely reader-friendly and well structured, with the author highlighting... |
 | Today's Technician: Automotive Fuels and Emissions. Classroom and Shop Manual Set by Barry Hollembeak Theory, diagnostics, and service procedures for automotive fuel and emission systems are spotlighted in this newest Classroom and Shop Manual set to join the popular Today's Technician Series. Experienced author Barry Hollembeak enhances the reader's understanding of present-day automotive fuels and emission systems by covering the theories and procedures that underpin ASE high priority skills. ... |
 | Applications and Fundamentals, Part 2, Inductively Coupled Plasma Emission Spectroscopy This, the second part of a two-volume treatise, Inductively Coupled Plasma Emission Spectroscopy, addresses methodology, instrumentation and performance. Part 2 deals with applications and fundamentals. In recent years the scarcity of adequate and modern books in emission spectroscopy has indicated a need for a comprehensive treatment. This book treats the basic principles of emission... |
| © 2008 BrightSurf.com |