|
Iowa State engineer develops laser technologies to analyze combustion, biofuels
December 06, 2007Let's say a fuel derived from biomass produces too much soot when it's burned in a combustion chamber designed for fossil fuels.
How can an engineer find the source of the problem? It originates, after all, in the flame zone of a highly turbulent combustion chamber. That's not exactly an easy place for an engineer to take measurements.
"It's fairly obvious when a combustor is not running well and producing a lot of soot and other pollutants," said Terry Meyer, an assistant professor of mechanical engineering at Iowa State University. "But then how do you solve that problem? To do that we can open up the black box and look inside the combustion chamber itself."
The tools that Meyer is developing to do that are highly sophisticated laser-based sensors that can capture images at thousands and even millions of frames per second. Those images record all kinds of data about what's happening in the flaming mix of fuel and air.
"The goal is to probe this harsh environment to provide the knowledge required to reduce pollutant emissions and enable the utilization of alternative fuels," Meyer said.
By selecting lasers of different wavelengths, Meyer's combustion sensors can record where pollutants such as soot, nitric oxide and carbon monoxide are being formed. The sensors can also look for unburned fuel and capture data about fuel sprays, fuel-air mixing and energy release.
Meyer's lab is now working on a two-year project to develop and advance laser techniques that are expected to help engineers improve the combustion systems that move vehicles, produce power and heat buildings. An important goal of the project is to analyze and improve the performance of alternative fuels in modern combustion systems.
Meyer's research is supported by an $87,000 grant from the Grow Iowa Values Fund, a state economic development program. This grant is supplemented by a contribution of products and engineering expertise from Goodrich Corporation's Engine Components unit in West Des Moines, a producer of fuel system components for aircraft engines, auxiliary power units, power-generating turbines and home heating systems. ConocoPhillips, the third largest integrated energy company in the United States, is supporting similar projects in Meyer's lab. The projects are part of ConocoPhillips' eight-year, $22.5 million research program at Iowa State. Meyer's research is also drawing interest and support from sources such at the National Aeronautics and Space Administration and the U.S. Air Force.
Meyer started working with laser diagnostics when he was a doctoral student in mechanical engineering at the University of Illinois at Urbana-Champaign. The work continued when he spent six years as a scientist developing and applying laser techniques for the Air Force Research Laboratory at Wright-Patterson Air Force Base in Dayton, Ohio.
He made the move to Iowa State in 2006 and is working to apply some of the military's sophisticated laser technologies to civilian applications.
And so Meyer's system of high-speed lasers, frequency conversion units, mirrors and cameras is being built in his Multiphase Reacting Flow Laboratory on the ground floor of Iowa State's Black Engineering Building.
It's work that could have impacts far beyond his lab. Meyer said his research aims to reduce reliance on fossil fuels, which currently account for 85 percent of the world's energy use.
Iowa State University
The tools that Meyer is developing to do that are highly sophisticated laser-based sensors that can capture images at thousands and even millions of frames per second. Those images record all kinds of data about what's happening in the flaming mix of fuel and air.
"The goal is to probe this harsh environment to provide the knowledge required to reduce pollutant emissions and enable the utilization of alternative fuels," Meyer said.
By selecting lasers of different wavelengths, Meyer's combustion sensors can record where pollutants such as soot, nitric oxide and carbon monoxide are being formed. The sensors can also look for unburned fuel and capture data about fuel sprays, fuel-air mixing and energy release.
Meyer's lab is now working on a two-year project to develop and advance laser techniques that are expected to help engineers improve the combustion systems that move vehicles, produce power and heat buildings. An important goal of the project is to analyze and improve the performance of alternative fuels in modern combustion systems.
Meyer's research is supported by an $87,000 grant from the Grow Iowa Values Fund, a state economic development program. This grant is supplemented by a contribution of products and engineering expertise from Goodrich Corporation's Engine Components unit in West Des Moines, a producer of fuel system components for aircraft engines, auxiliary power units, power-generating turbines and home heating systems. ConocoPhillips, the third largest integrated energy company in the United States, is supporting similar projects in Meyer's lab. The projects are part of ConocoPhillips' eight-year, $22.5 million research program at Iowa State. Meyer's research is also drawing interest and support from sources such at the National Aeronautics and Space Administration and the U.S. Air Force.
Meyer started working with laser diagnostics when he was a doctoral student in mechanical engineering at the University of Illinois at Urbana-Champaign. The work continued when he spent six years as a scientist developing and applying laser techniques for the Air Force Research Laboratory at Wright-Patterson Air Force Base in Dayton, Ohio.
He made the move to Iowa State in 2006 and is working to apply some of the military's sophisticated laser technologies to civilian applications.
And so Meyer's system of high-speed lasers, frequency conversion units, mirrors and cameras is being built in his Multiphase Reacting Flow Laboratory on the ground floor of Iowa State's Black Engineering Building.
It's work that could have impacts far beyond his lab. Meyer said his research aims to reduce reliance on fossil fuels, which currently account for 85 percent of the world's energy use.
Iowa State University
Combustion News and Current Combustion Events RSSFaulty DNA repair could be a risk factor for lung cancer in nonsmokers
People who have never smoked but whose cells cannot efficiently repair environmental insults to DNA are at higher risk of developing lung cancer than those with effective genomic repair capability.
A promising step towards more effective hydrogen storage
An international research team led by Swedish Professor Rajeev Ahuja, Uppsala University, has demonstrated an atomistic mechanism of hydrogen release in magnesium nanoparticles - a potential hydrogen storage material. The findings have been published in the online edition of Proceedings of the National Academy of Science (PNAS).
Energy crops take a roasting
A process used to roast coffee beans could give Britain's biomass a power boost, increasing the energy content of some of the UK's leading energy crops by up to 20 per cent.
Jaguar upgrade brings ORNL closer to petascale computing
Upgrades to Oak Ridge National Laboratory's Jaguar supercomputer have more than doubled its performance, increasing the system's ability to deliver far-reaching advances in climate studies, energy research, and a wide range of sciences.
65-million-year-old asteroid impact triggered a global hail of carbon beads
The asteroid presumed to have wiped out the dinosaurs struck the Earth with such force that carbon deep in the Earth's crust liquefied, rocketed skyward, and formed tiny airborne beads that blanketed the planet.
Excess pneumonia deaths linked to engine exhaust
Engine exhaust fumes are linked to excess deaths from pneumonia across England, suggests research published in the Journal of Epidemiology and Community Health.
Argonne tests validate BMW Hydrogen 7 emissions well-below SULEV
Independent tests conducted by engineers at the U.S. Department of Energy's (DOE) Argonne National Laboratory on a BMW Hydrogen 7 Mono-Fuel demonstration vehicle have found that the car's hydrogen-powered engine surpasses the super-ultra low-emission vehicle (SULEV) level, the most stringent emissions performance standard to date.
Clean-vehicle research initiative making progress
A public-private effort to develop technologies for more fuel-efficient automobiles and to investigate the feasibility of hydrogen-based vehicles has made significant progress in most research areas, says a new report from the National Research Council.
Findings could improve fuel cell efficiency
A new type of membrane based on tiny iron particles appears to address one of the major limitations exhibited by current power-generating fuel cell technology.
Arctic pollution's surprising history
Scientists know that air pollution particles from mid-latitude cities migrate to the Arctic and form an ugly haze, but a new University of Utah study finds surprising evidence that polar explorers saw the same phenomenon as early as 1870.
More Combustion News Articles
 | Engine Management: Advanced Tuning by Greg Banish |
 | Learning Autodesk Maya 2008, (Official Autodesk Training Guide, includes DVD): Foundation by Autodesk Maya Press |
 | Small Engine Repair (Haynes Manuals) by John Haynes |
 | How to Hot Rod Volkswagen Engines by Fred William Fisher |
 | Troubleshooting Marine Diesels by Peter Compton |
 | Small Engine Repair (Up to 20 Hp): Total Service Series by The Nichols/Chilton Editors |
 | Internal Combustion: How Corporations and Governments Addicted the World to Oil and Derailed the Alternativees by Edwin Black |
 | Turbochargers HP49 (HP Books): Turbo Design, Sizing & Matching, Spark-Ignition & Diesel Engine Applications, Water Injection, Controls, Carburetion, Intercooling, ... Street & Race Cars, Boats, Motorc by Hugh MacInnes |
 | How to Rebuild and Restore Farm Tractor Engines (Motorbooks Workshop) by Spencer Yost |
 | Internal Combustion Engine Fun by John Benjamin Heywood |
| © 2008 BrightSurf.com |