 |
|
NIST imaging system maps nanomechanical properties
December 13, 2007The National Institute of Standards and Technology (NIST) has developed an imaging system that quickly maps the mechanical properties of materials-how stiff or stretchy they are, for example-at scales on the order of billionths of a meter. The new tool can be a cost-effective way to design and characterize mixed nanoscale materials such as composites or thin-film structures.
The NIST nanomechanical mapper uses custom software and electronics to process data acquired by a conventional atomic force microscope (AFM), transforming the microscope's normal topographical maps of surfaces into precise two-dimensional representations of mechanical properties near the surface. The images enable scientists to see variations in elasticity, adhesion or friction, which may vary in different materials even after they are mixed together. The NIST system, described fully for the first time in a new paper,* can make an image in minutes whereas competing systems might take an entire day.
The images are based on measurements and interpretations of changes in frequency as a vibrating AFM tip scans a surface. Such measurements have commonly been made at stationary positions, but until now 2D imaging at many points across a sample has been too slow to be practical. The NIST DSP-RTS system (for digital signal processor-based resonance tracking system) has the special feature of locking onto and tracking changes in frequency as the tip moves over a surface. Mechanical properties of a sample are deduced from calculations based on measurements of the vibrational frequencies of the AFM tip in the air and changes in frequency when the tip contacts the material surface.
NIST materials researchers have used the system to map elastic properties of thin films with finer spatial resolution than is possible with other tools. The DSP-RTS can produce a 256 × 256 pixel image with micrometer-scale dimensions in 20 to 25 minutes. The new system also is modular and offers greater flexibility than competing approaches. Adding capability to map additional materials properties can be as simple as updating the software.
National Institute of Standards and Technology (NIST)
NIST materials researchers have used the system to map elastic properties of thin films with finer spatial resolution than is possible with other tools. The DSP-RTS can produce a 256 × 256 pixel image with micrometer-scale dimensions in 20 to 25 minutes. The new system also is modular and offers greater flexibility than competing approaches. Adding capability to map additional materials properties can be as simple as updating the software.
National Institute of Standards and Technology (NIST)
Nanomechanical Current Events and Nanomechanical News RSSGolden Scales: Nanoscale Mass Sensor from Berkeley Can Be Used to Weigh Individual Atoms and Molecules
There's a new "gold standard" in the sensitivity of weighing scales. Using the same technology with which they created the world's first fully functional nanotube radio, researchers with Berkeley Lab and the University of California (UC) at Berkeley have fashioned a nanoelectromechanical system (NEMS) that can function as a scale sensitive enough to measure the mass of a single atom of gold.
New ORNL process brings nanoparticles into focus
Scientists can study the biological impacts of engineered nanomaterials on cells within the body with greater resolution than ever because of a procedure developed by researchers at the Department of Energy's Oak Ridge National Laboratory.
Carbon nanotubes made into conductive, flexible 'stained glass'
Carbon nanotubes are promising materials for many high-technology applications due to their exceptional mechanical, thermal, chemical, optical and electrical properties.
Using nanotechnology, UCLA researchers discover cancer cells 'feel' much softer than normal cells
A multidisciplinary team of UCLA scientists were able to differentiate metastatic cancer cells from normal cells in patient samples using leading-edge nanotechnology that measures the softness of the cells.
World's Smallest Radio Fits in the Palm of the Hand . . . of an Ant
Harnessing the electrical and mechanical properties of the carbon nanotube, a team of researchers has crafted a working radio from a single fiber of that material.
Make Way for the Real Nanopod: Berkeley Researchers Create First Fully Functional Nanotube Radio
Make way for the real nanopod and make room in the Guinness World Records. A team of researchers with the U.S. Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) and the University of California at Berkeley have created the first fully functional radio from a single carbon nanotube, which makes it by several orders of magnitude the smallest radio ever made.
World's smallest radio uses single nanotube to pick up good vibrations
Physicists at the University of California, Berkeley, have built the smallest radio yet - a single carbon nanotube one ten-thousandth the diameter of a human hair that requires only a battery and earphones to tune in to your favorite station.
Doping technique brings nanomechanical devices into the semiconductor world
With the help of a device capable of depositing metals an atom at a time in the materials used in computer chips, a team of University of Wisconsin-Madison engineers has successfully blended modern semiconductor technology and nanomachines.
Reach out and touch an oscillator: Cornell researchers find a new way to read nanoscale vibrations
Nanomechanical oscillators — tiny strips of vibrating silicon only a few hundred atoms thick — are the subject of extensive study by nanotechnology researchers. They could someday replace bulky quartz crystals in electronic circuits or be used to detect and identify bacteria and viruses.
New JILA apparatus measures fast nanoscale motions
A new nanoscale apparatus developed at JILA—a tiny gold beam whose 40 million vibrations per second are measured by hopping electrons—offers the potential for a 500-fold increase in the speed of scanning tunneling microscopes (STM), perhaps paving the way for scientists to watch atoms vibrate in high definition in real time.
More Nanomechanical Current Events and Nanomechanical News Articles
| A novel optical waveguide microcantilever sensor for the detection of nanomechanical forces.(RESEARCH): An article from: Fiber Optic Sensors and Systems by Gale Reference Team This digital document is an article from Fiber Optic Sensors and Systems, published by Thomson Gale on July 1, 2006. The length of the article is 714 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.Citation... | |
| Interfacial force microscopy: imaging and quantitative measurement of interfacial forces and nanomechanical properties.: An article from: Canadian Chemical News by J.F. Graham, O.L. Warren, P.R. Norton This digital document is an article from Canadian Chemical News, published by Chemical Institute of Canada on February 1, 1998. The length of the article is 1849 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.Citation... | |
 | Independent component analysis of nanomechanical responses of cantilever arrays [An article from: Analytica Chimica Acta] by R. Archibald, P. Datskos, G. Devault, V. Lamberti This digital document is a journal article from Analytica Chimica Acta, published by Elsevier in 2007. The article is delivered in HTML format and is available in your Amazon.com Media Library immediately after purchase. You can view it with any web browser.Description: The ability to detect and identify chemical and biological elements in air or liquid environments is of far reaching importance.... |
| Development of a peptide inhibitor-based cantilever sensor assay for cyclic adenosine monophosphate-dependent protein kinase [An article from: Analytica Chimica Acta] by H.S. Kwon, K.C. Han, K.S. Hwang, J.H. Lee, T. Kim This digital document is a journal article from Analytica Chimica Acta, published by Elsevier in 2007. The article is delivered in HTML format and is available in your Amazon.com Media Library immediately after purchase. You can view it with any web browser.Description: A highly sensitive nanomechanical cantilever sensor assay based on an electrical measurement has been developed for detecting... |
| © 2008 BrightSurf.com |