|
Directed self-ordering of organic molecules for electronic devices
February 20, 2008A simple surface treatment technique demonstrated by a collaboration between researchers at the National Institute of Standards and Technology (NIST), Penn State and the University of Kentucky potentially offers a low-cost way to mass produce large arrays of organic electronic transistors on polymer sheets for a wide range of applications including flexible displays, "intelligent paper" and flexible sheets of biosensor arrays for field diagnostics.
In a paper posted this week,* the team describes how a chemical pretreatment of electrical contacts can induce self-assembly of molecular crystals to both improve the performance of organic semiconductor devices and provide electrical isolation between devices.
Organic electronic devices are inching towards the market. Compounds with tongue-twisting names like "5,11-bis(triethylsilylethynyl) anthradithiophene" can be designed with many of the electrical properties of more conventional semiconductors. But unlike traditional semiconductors that require high-temperature processing steps, organic semiconductor devices can be manufactured at room temperature. They could be built on flexible polymers instead of rigid silicon wafers. Magazine-size displays that could be rolled up or folded to pocket size and plastic sheets that incorporate large arrays of detectors for medical monitoring or diagnostics in the field are just a couple of the tantalizing possibilities.
One unsolved problem is how to manufacture them efficiently and at low cost. Large areas can be coated rapidly with a thin film of the organic compound in solution, which dries to a semiconductor layer. But for big arrays like displays, that layer must be patterned into electrically isolated devices. Doing that requires one or more additional steps that are costly, time-consuming and/or difficult to do accurately.
The NIST team and their partners studied the organic version of a workhorse device-the field effect transistor (FET)-that commonly is used as a switch to, for example, turn pixels on and off in computer displays. The essential structure consists of two electrical contacts with a channel of semiconductor between them. The researchers found that by applying a specially tailored pretreatment compound to the contacts before applying the organic semiconductor solution, they could induce the molecules in solution to self-assemble into well-ordered crystals at the contact sites. These structures grow outwards to join across the FET channel in a way that provides good electrical properties at the FET site, but further away from the treated contacts the molecules dry in a more random, helter-skelter arrangement that has dramatically poorer properties-effectively providing the needed electrical isolation for each device without any additional processing steps. The work is an example of the merging of device structure and function that may enable low cost manufacturing, and an area where organic materials have important advantages.
In addition to its potential as a commercially important manufacturing process, the authors note, this chemically engineered self-ordering of organic semiconductor molecules can be used to create test structures for fundamental studies of charge transport and other important properties of a range of organic electronic systems.
National Institute of Standards and Technology (NIST)
One unsolved problem is how to manufacture them efficiently and at low cost. Large areas can be coated rapidly with a thin film of the organic compound in solution, which dries to a semiconductor layer. But for big arrays like displays, that layer must be patterned into electrically isolated devices. Doing that requires one or more additional steps that are costly, time-consuming and/or difficult to do accurately.
The NIST team and their partners studied the organic version of a workhorse device-the field effect transistor (FET)-that commonly is used as a switch to, for example, turn pixels on and off in computer displays. The essential structure consists of two electrical contacts with a channel of semiconductor between them. The researchers found that by applying a specially tailored pretreatment compound to the contacts before applying the organic semiconductor solution, they could induce the molecules in solution to self-assemble into well-ordered crystals at the contact sites. These structures grow outwards to join across the FET channel in a way that provides good electrical properties at the FET site, but further away from the treated contacts the molecules dry in a more random, helter-skelter arrangement that has dramatically poorer properties-effectively providing the needed electrical isolation for each device without any additional processing steps. The work is an example of the merging of device structure and function that may enable low cost manufacturing, and an area where organic materials have important advantages.
In addition to its potential as a commercially important manufacturing process, the authors note, this chemically engineered self-ordering of organic semiconductor molecules can be used to create test structures for fundamental studies of charge transport and other important properties of a range of organic electronic systems.
National Institute of Standards and Technology (NIST)
Semiconductor News and Current Semiconductor Events RSSNew paper offers insights into 'blinking' phenomena
A new paper by a team of researchers led by University of Notre Dame physicist Bolizsár Jankó provides an overview of research into one of the few remaining unsolved problems of quantum mechanics.
Discovery by UC Riverside physicists could enable development of faster computers
Physicists at UC Riverside have made an accidental discovery in the lab that has potential to change how information in computers can be transported or stored. Dependent on the "spin" of electrons, a property electrons possess that makes them behave like tiny magnets, the discovery could help in the development of spin-based semiconductor technology such as ultrahigh-speed computers.
First semiconductor-based PET scanner demonstrates potential to aid in early diagnosis of disease
Evaluations of the first-ever prototype positron emission tomography (PET) brain scanner that uses semiconductor detectors indicate that the scanner could advance the quality and spatial resolution of PET imaging, according to researchers at SNM's 55th Annual Meeting.
Microwave synthesis connects with the (quantum) dots
Materials researchers at the National Institute of Standards and Technology (NIST) have developed a simplified, low-cost process for producing high-quality, water-soluble "quantum dots" for biological research.
'Nanoglassblowing' seen as boon to study of individual molecules
While the results may not rival the artistry of glassblowers in Europe and Latin America, researchers at the National Institute of Standards and Technology (NIST) and Cornell University have found beauty in a new fabrication technique called "nanoglassblowing" that creates nanoscale (billionth of a meter) fluidic devices used to isolate and study single molecules in solution-including individual DNA strands. The novel method is described in a paper posted online next week in the journal Nanotechnology.
Testing, radiation testing: Northwestern transistors on space station
Transistors based on a new kind of material created by Northwestern University researchers have been lifted into outer space on the space shuttle Endeavour and attached to the outside of the International Space Station for radiation testing.
Weizmann Institute Scientists Find New 'Quasiparticles'
Weizmann Institute physicists have demonstrated, for the first time, the existence of 'quasiparticles' with one quarter the charge of an electron. This finding could be a first step toward creating exotic types of quantum computers that might be powerful, yet highly stable.
A molecular 'salve' to soothe surface stresses
Researchers at the National Institute of Standards and Technology (NIST) have shown for the first time that a single layer of molecular "salve" can significantly soothe the stresses affecting clean metal surfaces.
Oregon physicists don't flip spin but find possible electron switch
University of Oregon researchers trying to flip the spin of electrons with laser bursts lasting picoseconds (a trillionth of a second) instead found a way to manipulate and control the spin -- knowledge that may prove useful in a variety of new materials and technologies.
Carbon nanoribbons could make smaller, speedier computer chips
Stanford chemists have developed a new way to make transistors out of carbon nanoribbons. The devices could someday be integrated into high-performance computer chips to increase their speed and generate less heat, which can damage today's silicon-based chips when transistors are packed together tightly.
More Semiconductor News Articles
| © 2008 BrightSurf.com |