 |
|
Modified electron microscope identifies atoms
February 22, 2008A new electron microscope recently installed in Cornell's Duffield Hall is enabling scientists for the first time to form images that uniquely identify individual atoms in a crystal and see how those atoms bond to one another. And in living color.
"The current generation of electron microscopes can be thought of as expensive black and white cameras where different atoms appear as different shades of gray," explained David Muller, Cornell associate professor of applied and engineering physics. "This microscope takes color pictures -- where each colored atom represents a uniquely identified chemical species."
The instrument is a new type of scanning transmission electron microscope (STEM), built by the NION Company of Kirkland, Wash., under an instrument-development award to Cornell from the National Science Foundation (NSF). John Silcox, the David E. Burr Professor of Engineering at Cornell, and Ondrej Krivanek of NION are co-principal investigators on the project.
The microscope incorporates new aberration-correction technology designed by Krivanek that focuses a beam of electrons on a spot smaller than a single atom -- more sharply and with greater intensity than previously possible. This allows information previously hidden in the background, or "noise," to be seen. It also provides up to a hundredfold increase in imaging speed.
The capabilities of the new instrument in analyzing a test sample are described in an article in the Feb. 22 issue of the journal Science by Muller, Silcox, Krivanek and colleagues at Cornell and in Korea and Japan.
It allows scientists to peer inside a material or a device and see how it is put together at the atomic scale where quantum effects dominate and everyday intuition fails. One of the most important applications of the new instrument will be to conduct what Silcox calls "materials pathology" to aid researchers in their development of new materials to use in electronic circuits, computer memories and other nanoscale devices. "We can look at structures people have built and tell them if they've built what they thought they did," Silcox explained.
A STEM shoots an electron beam through a thin-film sample and scans the beam across the sample in subatomic steps. In addition to forming an image, the new microscope can identify atoms in its path by a process called electron energy-loss spectrometry. Atoms in the path of the beam absorb energy from some of its electrons to kick their own electrons into higher orbits. The amount of energy this takes is different for each kind of atom.
The detector that collects electrons emerging from the sample measures the energy losses, and from this the atoms in the path of the beam can be identified. The detector can simultaneously produce multiple images -- one for every different species of atom in the sample, and these can be color-coded, each color representing a different electron energy signature.
The method also can show how atoms are bonded to one another in a crystal, because the bonding creates small shifts in the energy signatures. In earlier STEMS, many electrons from the beam, including those with changed energies, were scattered at wide angles by simple collisions with atoms. The new STEM includes magnetic lenses that collect emerging electrons over a wider angle. Previously, Silcox said, about 8 percent of the emerging electrons were collected, but the new detector collects about 80 percent, allowing more accurate readings of the small changes in energy levels that reveal bonding between atoms.
More complete collection and a brighter and a more sharply focused beam also allow the new microscope to scan much faster. In early tests it collected a 4,096-pixel image in about 30 seconds, 50 to 100 times faster than in conventional STEMs.
To demonstrate the capability of the new instrument, Muller examined a sample consisting of layers of two different materials: lanthanum-strontium-manganese oxide and strontium-titanate. This was done as part of a research project on which he is collaborating with scientists in Korea and Japan. "It's an artificial structure that will have interesting magnetic and electrical properties," he said, "but for it to work properly we have to make atomically sharp interfaces between the layers. It's really important to know if a few atoms leaked across the interface."
In the color image from the new STEM, where manganese appears red and titanium blue, a line of purple shows mixing at the edge between the two layers. "We've learned that there's room for improvement," Muller says, adding "This wasn't our best sample, but if we had put that one in it would have been a fairly boring image."
The new instrument arrived at Cornell in October, and is still undergoing calibration and testing.
The problems that limited electron imaging were identified as long ago as 1935, Silcox said, and ideas for overcoming them were outlined in 1947. But it was not until very recently that the engineering obstacles to putting them into practice were overcome. Largely, he said, this is because the problem required advanced computing, including computers to design the instrument, computer-controlled machinery to manufacture parts to fine tolerances, and computers to control the instrument itself.
Cornell University Communications
The microscope incorporates new aberration-correction technology designed by Krivanek that focuses a beam of electrons on a spot smaller than a single atom -- more sharply and with greater intensity than previously possible. This allows information previously hidden in the background, or "noise," to be seen. It also provides up to a hundredfold increase in imaging speed.
The capabilities of the new instrument in analyzing a test sample are described in an article in the Feb. 22 issue of the journal Science by Muller, Silcox, Krivanek and colleagues at Cornell and in Korea and Japan.
It allows scientists to peer inside a material or a device and see how it is put together at the atomic scale where quantum effects dominate and everyday intuition fails. One of the most important applications of the new instrument will be to conduct what Silcox calls "materials pathology" to aid researchers in their development of new materials to use in electronic circuits, computer memories and other nanoscale devices. "We can look at structures people have built and tell them if they've built what they thought they did," Silcox explained.
A STEM shoots an electron beam through a thin-film sample and scans the beam across the sample in subatomic steps. In addition to forming an image, the new microscope can identify atoms in its path by a process called electron energy-loss spectrometry. Atoms in the path of the beam absorb energy from some of its electrons to kick their own electrons into higher orbits. The amount of energy this takes is different for each kind of atom.
The detector that collects electrons emerging from the sample measures the energy losses, and from this the atoms in the path of the beam can be identified. The detector can simultaneously produce multiple images -- one for every different species of atom in the sample, and these can be color-coded, each color representing a different electron energy signature.
The method also can show how atoms are bonded to one another in a crystal, because the bonding creates small shifts in the energy signatures. In earlier STEMS, many electrons from the beam, including those with changed energies, were scattered at wide angles by simple collisions with atoms. The new STEM includes magnetic lenses that collect emerging electrons over a wider angle. Previously, Silcox said, about 8 percent of the emerging electrons were collected, but the new detector collects about 80 percent, allowing more accurate readings of the small changes in energy levels that reveal bonding between atoms.
More complete collection and a brighter and a more sharply focused beam also allow the new microscope to scan much faster. In early tests it collected a 4,096-pixel image in about 30 seconds, 50 to 100 times faster than in conventional STEMs.
To demonstrate the capability of the new instrument, Muller examined a sample consisting of layers of two different materials: lanthanum-strontium-manganese oxide and strontium-titanate. This was done as part of a research project on which he is collaborating with scientists in Korea and Japan. "It's an artificial structure that will have interesting magnetic and electrical properties," he said, "but for it to work properly we have to make atomically sharp interfaces between the layers. It's really important to know if a few atoms leaked across the interface."
In the color image from the new STEM, where manganese appears red and titanium blue, a line of purple shows mixing at the edge between the two layers. "We've learned that there's room for improvement," Muller says, adding "This wasn't our best sample, but if we had put that one in it would have been a fairly boring image."
The new instrument arrived at Cornell in October, and is still undergoing calibration and testing.
The problems that limited electron imaging were identified as long ago as 1935, Silcox said, and ideas for overcoming them were outlined in 1947. But it was not until very recently that the engineering obstacles to putting them into practice were overcome. Largely, he said, this is because the problem required advanced computing, including computers to design the instrument, computer-controlled machinery to manufacture parts to fine tolerances, and computers to control the instrument itself.
Cornell University Communications
Electron Microscope News and Current Electron Microscope Events RSSNIST studies how new helium ion microscope measures up
Just as test pilots push planes to explore their limits, researchers at the National Institute of Standards and Technology (NIST) are probing the newest microscope technology to further improve measurement accuracy at the nanoscale.
Scientists peel away the mystery behind gold's catalytic prowess
Few materials have exercised as much of a hold on the human imagination, or on human history, as has gold.
True properties of carbon nanotubes measured
For more than 15 years, carbon nanotubes (CNTs) have been the flagship material of nanotechnology. Researchers have conceived applications for nanotubes ranging from microelectronic devices to cancer therapy. Their atomic structure should, in theory, give them mechanical and electrical properties far superior to most common materials.
How nonstick bugs evade natural fly paper
There are few things more irritating than a fly buzzing around the house. South Africans have an unconventional solution to the problem.
New disease-fighting nanoparticles look like miniature pastries
Ultra-miniature bialy-shaped particles - called nanobialys because they resemble tiny versions of the flat, onion-topped rolls popular in New York City - could soon be carrying medicinal compounds through patients' bloodstreams to tumors or atherosclerotic plaques.
The photonic beetle
Researchers have been unable to build an ideal "photonic crystal" to manipulate visible light, impeding the dream of ultrafast optical computers.
Iron 'snow' helps maintain Mercury's magnetic field, scientists say
New scientific evidence suggests that deep inside the planet Mercury, iron "snow" forms and falls toward the center of the planet, much like snowflakes form in Earth's atmosphere and fall to the ground.
Are nanobots on their way?
The first real steps towards building a microscopic device that can construct nano machines have been taken by US researchers. Writing in the peer-reviewed publication, International Journal of Nanomanufacturing from Inderscience Publishers, researchers describe an early prototype for a nanoassembler.
'Sticky nanotubes' hold key to future technologies
Researchers at Purdue University are the first to precisely measure the forces required to peel tiny nanotubes off of other materials, opening up the possibility of creating standards for nano-manufacturing and harnessing a gecko's ability to walk up walls.
New technique yields more detailed picture of chromatin structure
University of Illinois researchers have developed a technique for imaging cells under an electron microscope that yields a sharper image of the structure of chromatin, the tightly wound bundle of genetic material and proteins that makes up the chromosomes.
More Electron Microscope News Articles
 | Transmission Electron Microscopy: A Textbook for Materials Science (4-Vol Set) by David B. Williams, C. Barry Carter This groundbreaking text provides the necessary instructions for hands-on application of this versatile materials characterization technique and is supported by over 600 illustrations and... |
 | Scanning Electron Microscopy and X-ray Microanalysis by Joseph Goldstein, Dale E. Newbury, David C. Joy, Charles E. Lyman, Patrick Echlin, Eric Lifshin, L.C. Sawyer, J.R. Michael Providing a comprehensive introduction to the capabilities and use of scanning electron microscopes (SEM) and x-ray spectrometers, this highly acclaimed text emphasizes practical aspects of imaging and analysis for a broad audience of students and practitioners whose backgrounds span a wide range of science and technology. Topics discussed include user-controlled functions of scanning electron... |
 | Principles of Fluorescence Spectroscopy by Joseph R. Lakowicz The third edition of the established classic text reference, Principles of Fluorescence Spectroscopy, will enhance upon the earlier editions' successes. Organized as a textbook for the learning student or the researcher needing to acquire the core competencies, Principles of Fluorescence Spectroscopy, 3e will maintain the emphasis on basics, while updating the examples to include recent results... |
 | Electron Microscopy, 2nd Edition by John J. Bozzola, Lonnie Dee Russell Electron Microscopy covers all of the important aspects of electron microscopy for biologists, including theory of scanning and transmission, specimen preparation, digital imaging and image analysis, laboratory safety and interpretation of images. The text also contains a complete atlas of... |
 | Microcosmos: Discovering the World Through Microscopic Images from 20 X to Over 22 Million X Magnification by Brandon Broll A journey into everyday life through spectacular microscopic images. This substantial volume brings together extraordinary images produced through the latest technologies in microphotography. Most of the 205 stunning, full-color photographs have been taken using scanning electron microscopy (SEM), allowing us to see our world as never before. Each image is a close-up that reveals... |
 | Atomic Physics (Oxford Master Series in Atomic, Optical and Laser Physics) by Christopher J. Foot This text will thoroughly update the existing literature on atomic physics. Intended to accompany an advanced undergraduate course in atomic physics, the book will lead the students up to the latest advances and the applications to Bose-Einstein Condensation of atoms, matter-wave inter-ferometry and quantum computing with trapped ions. The elementary atomic physics covered in the early chapters... |
 | Transmission Electron Microscopy and Diffractometry of Materials by Brent Fultz, James Howe This book explains concepts of transmission electron microscopy (TEM) and x-ray diffractometry (XRD) that are important for the characterization of materials. The third edition has been updated to cover important technical developments, including the remarkable recent improvement in resolution of the TEM. This edition is not substantially longer than the second, but all chapters have been updated... |
 | Nanoscale Energy Transport and Conversion: A Parallel Treatment of Electrons, Molecules, Phonons, and Photons (Mit-Pappalardo Series in Mechanical Engineering) by Gang Chen This is a graduate level textbook in nanoscale heat transfer and energy conversion that can also be used as a reference for researchers in the developing field of nanoengineering. It provides a comprehensive overview of microscale heat transfer, focusing on thermal energy storage and transport. Chen broadens the readership by incorporating results from related disciplines, from the point of view... |
 | Elements of Quantum Optics by Pierre Meystre, Murray Sargent Elements of Quantum Optics gives a self-contained and broad coverage of the basic elements necessary to understand and carry out research in laser physics and quantum optics, including a review of basic quantum mechanics and pedagogical introductions to system-reservoir interactions and to second quantization. The text reveals the close connection between many seemingly unrelated topics, such as... |
 | Principles of Lasers by Orazio Svelto This new Fourth Edition of Principles of Lasers is so thoroughly updated and expanded that it is virtually a whole new book. But the text’s essential mission remains the same: to provide a wide-ranging yet unified description of laser behavior, physics, technology, and current applications. Dr. Svelto emphasizes the physical rather than the mathematical aspects of lasers, and presents the... |
| © 2008 BrightSurf.com |