Brightsurf Science News and Current Science News Events
 
Email a Friend Send to a friend
Printer Friendly Print Stakeholders use science to find common ground on wood supply from forests

Stakeholders use science to find common ground on wood supply from forests

March 03, 2008

Northern Arizona University has released a report that identifies the potential volume of wood resources available from more than 2 million acres of Arizona forests, representing the first major agreement among groups typically at odds over the issue of forest thinning.

The "Wood Supply Analysis" report identifies a potential supply of up to 850 million cubic feet of wood and 8 million tons of biomass from branches and timber residue for such commercial uses as pallets, firewood, poles, lumber, mulch and stove pellets.




A group of 20 stakeholders representing forest wood-product businesses, local government, environmental groups and public land and resource management agencies worked with scientists from NAU to build agreement about the amount and type of wood supply that could be available from the thinning of Arizona's ponderosa pine forests to promote ecosystem health and reduce the risk of unnaturally severe wildfire.

"Even the best science and the best of intentions are of limited value if they cannot inform decisions and appropriate action," said NAU professor Tom Sisk, founder of NAU's Forest Ecosystem Restoration Analysis Project, which led the effort. "I think we have turned a corner, where everybody wants to see on-the-ground progress in forest stewardship."

The stakeholder group included representatives from the USDA Forest Service, Center for Biological Diversity, Grand Canyon Trust, NAU's Ecological Restoration Institute, Forest Energy/Future Forests, the Greater Flagstaff Forests Partnership and others.

The group evaluated 2.4 million acres of ponderosa pine forest stretching from the South Rim of the Grand Canyon, across the Mogollon Plateau, to the New Mexico state line. The area primarily encompasses the Coconino, Kaibab and Apache-Sitgreaves national forests, a small portion of the Tonto National Forest and some private and state lands.

The group agreed that the identified wood and biomass resources were available from 41 percent of the area studied. They also agreed that 26 percent of the area was not appropriate for thinning for commercial wood byproducts. Some participants felt that an additional 33 percent of the landscape might be an appropriate source of additional wood byproducts. But because of differing views about thinning versus controlled-burning restoration treatments, and uncertainty about other factors such as road access and archaeological sites, Sisk said, the group remained divided about thinning these lands, which would have increased estimated wood supply by only 16 percent.

"This project is unique at the national level, and the fact that consensus was reached on almost 70 percent of the landscape is remarkable," said Todd Schulke, forest programs director of the Center for Biological Diversity.

Steve Gatewood, representing the Greater Flagstaff Forests Partnership, said appropriately scaled wood products businesses will play a key role in restoring forests. "However, stakeholders want assurance that 'appropriate' is defined by restoration needs, not industry profit motives, and businesses want guarantees of future wood supplies to invest in equipment designed to harvest and process small-diameter wood-a much harder business to make viable than when harvesting larger diameter trees was the norm," said Gatewood.

Rob Davis, president of Forest Energy and owner of Future Forests, two companies using material from thinned forests, noted that although the products derived from forests have changed in recent years, forests remain a valuable renewable resource for recreation, wildlife, water and wood products. "This milestone consensus is a breakthrough in achieving the most prudent use of this resource."

The ForestERA Project estimates of potential wood supply were derived from satellite imagery and ground measurements and are based on treatment scenarios developed by the group. The process included seven full-day workshops in northern Arizona that were open to the public.

"It's challenging to lead a contentious debate about important social issues while remaining true to the underlying science, but this group stepped up to the challenge, and I think they have articulated a sensible approach that will benefit the forest and those who care about and depend on it," said Haydee Hampton, NAU research associate and leader of the wood supply project.

Hampton said the Southwestern Region of the USDA Forest Service funded the study to inform local-level discussions of future thinning projects that will include National Environmental Policy Act analyses and to foster the development of contracts to wood product businesses to accomplish forest restoration.

Northern Arizona University




More Wood Supply News Articles


Engineering Our Digital Future: The Infinity Project
by Geoffrey C. Orsak, Sally L. Wood, Scott C. Douglas, David C. Munson, John R. Treichler, Ravindra A. Athale, Mark W. Yoder

This book, Engineering Our Digital Future, plus a broad spectrum of supplemental materials, classroom technology, and a comprehensive instructor training program—work in concert to motivate users to learn about the infinite possibilities of technology and engineering in today's world. Developed by a national team led by Southern Methodist University and Texas Instruments, this book is the...



Woodcarving: Tools, Material & Equipment, Volume 1
by Chris Pye

Get the right results with classic chisels, gouges and power tools. Photo-enhanced coverage clarifies how tools function, how to make, fit, and remove handles, and how to correct carving-tool faults. Also learn the secrets of cutting success —how to sharpen squarely and straight, and on...



How To Knit In The Woods: 20 Projects for the Great Outdoors
by Shannon Okey

Wow your fellow campers and pick up new skills with these creative and easy-to-follow knitting projects. Featuring 20 outdoor-friendly knitting projects, How to Knit in the Woods is every crafty person's indispensable guide to creativity in the open air. Full of advice on how to choose quick-drying yarns and other outdoor-friendly materials, and how to knit on the go -- this is not...



Dry Spring: The Coming Water Crisis of North America
by Chris Wood

Veteran journalist Chris Wood declares war on North America's blasé attitude toward the environment in general and water in particular. The battle he wages in his awesome, terrifying Dry Spring (awesome for its depth of research, terrifying for what it portends) is positively ferocious. Wood lobs facts like grenades, and he hits his target--our collective conscience and fear of a very grim...



Sugar Gliders As Your New Pet
by Dennis Kelsey-Wood

What's a sugar glider? Well, it's a furry little Australian marsupial about 9 to 12 inches long. It has big, trusting eyes, big ears, and a pointed little snout. This easily read book is illustrated with over 50 photos and will be a welcome edition for the experienced sugar glider owner or for the new owner of these cute little...



Build Your Own Earth Oven: A Low-Cost, Wood-Fired Mud Oven; Simple Sourdough Bread; Perfect Loaves
by Kiko Denzer

Earth ovens combine the utility of a wood-fired, retained-heat oven with the ease and timeless beauty of earthen construction. Building one will appeal to bakers, builders, and beginners of all kinds, from:the serious or aspiring baker who wants the best low-cost bread oven, togardeners who want a centerpiece for a beautiful outdoor kitchen, tooutdoor chefs, tocreative people interested in...



Period Finishes and Effects
by Judith Miller, Martin Miller

Paint finishes and effects are now established as an essential component of every decorator's range of skills. Here, for the first time in paperback, is bestselling authors Judith and Martin Miller's fully illustrated practical guide to the secrets of the surface finishes and effects that complement period homes and furniture. Each chapter is illustrated by inspirational photographs showing how...



Wood Magazine: Build Your Own Shop Jigs & Fixtures (Wood Magazine)
by Editors of Wood Magazine

Well-made jigs and fixtures help woodworkers perform virtually every task more accurately and efficiently. That’s why it’s so important to have a good selection available—and the most economical way to obtain the right ones is to build them yourself. Here Wood® Magazine presents dozens upon dozens of shop-proven jigs and fixtures that make working with wood easier, better, and...

Multimedia and Information Engineering, Preliminary Version
by Geoffrey C. Orsak, Ravindra Athale, Scott C. Douglas, David C. Munson, John R. Treichler, Sally L. Wood, Mark A. Yoder



SAP SCM: Applications and Modeling for Supply Chain Management (with BW Primer)
by Daniel C. Wood

SAP SCM: Applications and Modeling for Supply Chain Management empowers you to capitalize on the sophistication of SAP APO. This book provides clear advice on the inevitable, critical decisions that can lead to project success or failure and shows you, wherever you are on the supply chain management staff—buyer, planner, ground controller or analyst—to fully exploit the agility SAP...

© 2008 BrightSurf.com