|
Low-cost reusable material could facilitate capture of carbon dioxide from power plants
March 10, 2008Researchers have developed a new, low-cost material for capturing carbon dioxide (CO2) from the smokestacks of coal-fired power plants and other generators of the greenhouse gas. Produced with a simple one-step chemical process, the new material has a high capacity for absorbing carbon dioxide - and can be reused many times.
Combined with improved heat management techniques, the new material could provide a cost-effective way to capture large quantities of carbon dioxide from coal-burning facilities. Existing CO2 capture techniques involve the use of solid materials that lack sufficient stability for repeated use - or liquid adsorbents that are expensive and require significant amounts of energy.
"This is something that you could imagine scaling up for commercial use," said Christopher Jones, a professor in the School of Chemical and Biomolecular Engineering at the Georgia Institute of Technology. "Our material has the combination of high capacity, easy synthesis, low cost and a robust ability to be recycled - all the key criteria for an adsorbent that would be used on an industrial scale."
Details of the new material, known as hyperbranched aluminosilica (HAS), are scheduled to appear in the March 19th issue of the Journal of the American Chemical Society. The research was supported by the U.S. Department of Energy's National Energy Technology Laboratory.
Growing concern over increased levels of atmospheric carbon dioxide has prompted new interest in techniques for removing the gas from the smokestacks of such large-scale sources as coal-fired electric power plants. But to minimize their economic impact, the cost of adding such controls must be minimized so they don't raise the price of electricity significantly.
Once removed from the stack gases, the CO2 might be sequestered in the deep ocean, in mined-out coal seams or in depleted petroleum reservoirs. If the CO2 capture and sequestration process can be made practical, America's large resources of coal could be used with less impact on global climate change.
Working with Department of Energy scientists Daniel Fauth and McMahan Gray, Jones and graduate students Jason Hicks and Jeffrey Drese developed a way to add CO2-adsorbing amine polymer groups to a solid silica substrate using covalent bonding. The strong chemical bonds make the material robust enough to be reused many times.
"Given the volumes involved, you must be able to recycle the adsorbent material for the process to be cost-effective," said Jones. "Otherwise, you would be creating large and expensive waste streams of adsorbent."
Production of the HAS material is relatively simple, and requires only the mixing of the silica substrate with a precursor of the amine polymer in solution. The amine polymer is initiated on the silica surface, producing a solid material that can be filtered out and dried.
To test the effectiveness of their new material, the Georgia Tech researchers passed simulated flue gases through tubes containing a mixture of sand and HAS. The CO2 was adsorbed at temperatures ranging from 50 to 75 degrees Celsius. Then the HAS was heated to between 100 and 120 degrees Celsius to drive off the gas so the adsorbent could be used again.
The HAS material works in the presence of moisture, an unavoidable by-product of the combustion process.
Adsorption of the CO2 generates considerable amounts of heat, which must be managed and thermally recycled. Removal of the carbon dioxide requires heating the adsorbent.
"How to manage this heat is one of the most critical issues controlling the economics of a potential large scale process," Jones added. "You must control the production of heat by the adsorption step, and you don't want to put any more energy into the desorption process than necessary."
Because of their chemical structure, the amine groups provide three different classes of binding sites for carbon dioxide, each with a different binding energy. Optimizing the production of binding sites is a goal for future research, Jones said.
Beyond the material, other components of the separation and sequestration process must also be improved and optimized before it can become a practical technique for removing CO2 from flue gases. The best way to expose the flue gases to the adsorbent material is also key issue.
"There are many pieces that must fit together to make the overall economics of carbon dioxide capture and sequestration work," Jones added. "The biggest challenge for this whole field of research right now is to do this as inexpensively as possible. We think that our class of materials - a hyperbranched amine polymer bound to a solid support - is potentially ideal because it is simple to make, reusable and has a high capacity."
Georgia Institute of Technology Research News
Details of the new material, known as hyperbranched aluminosilica (HAS), are scheduled to appear in the March 19th issue of the Journal of the American Chemical Society. The research was supported by the U.S. Department of Energy's National Energy Technology Laboratory.
Growing concern over increased levels of atmospheric carbon dioxide has prompted new interest in techniques for removing the gas from the smokestacks of such large-scale sources as coal-fired electric power plants. But to minimize their economic impact, the cost of adding such controls must be minimized so they don't raise the price of electricity significantly.
Once removed from the stack gases, the CO2 might be sequestered in the deep ocean, in mined-out coal seams or in depleted petroleum reservoirs. If the CO2 capture and sequestration process can be made practical, America's large resources of coal could be used with less impact on global climate change.
Working with Department of Energy scientists Daniel Fauth and McMahan Gray, Jones and graduate students Jason Hicks and Jeffrey Drese developed a way to add CO2-adsorbing amine polymer groups to a solid silica substrate using covalent bonding. The strong chemical bonds make the material robust enough to be reused many times.
"Given the volumes involved, you must be able to recycle the adsorbent material for the process to be cost-effective," said Jones. "Otherwise, you would be creating large and expensive waste streams of adsorbent."
Production of the HAS material is relatively simple, and requires only the mixing of the silica substrate with a precursor of the amine polymer in solution. The amine polymer is initiated on the silica surface, producing a solid material that can be filtered out and dried.
To test the effectiveness of their new material, the Georgia Tech researchers passed simulated flue gases through tubes containing a mixture of sand and HAS. The CO2 was adsorbed at temperatures ranging from 50 to 75 degrees Celsius. Then the HAS was heated to between 100 and 120 degrees Celsius to drive off the gas so the adsorbent could be used again.
The HAS material works in the presence of moisture, an unavoidable by-product of the combustion process.
Adsorption of the CO2 generates considerable amounts of heat, which must be managed and thermally recycled. Removal of the carbon dioxide requires heating the adsorbent.
"How to manage this heat is one of the most critical issues controlling the economics of a potential large scale process," Jones added. "You must control the production of heat by the adsorption step, and you don't want to put any more energy into the desorption process than necessary."
Because of their chemical structure, the amine groups provide three different classes of binding sites for carbon dioxide, each with a different binding energy. Optimizing the production of binding sites is a goal for future research, Jones said.
Beyond the material, other components of the separation and sequestration process must also be improved and optimized before it can become a practical technique for removing CO2 from flue gases. The best way to expose the flue gases to the adsorbent material is also key issue.
"There are many pieces that must fit together to make the overall economics of carbon dioxide capture and sequestration work," Jones added. "The biggest challenge for this whole field of research right now is to do this as inexpensively as possible. We think that our class of materials - a hyperbranched amine polymer bound to a solid support - is potentially ideal because it is simple to make, reusable and has a high capacity."
Georgia Institute of Technology Research News
Carbon Dioxide News and Current Carbon Dioxide Events RSSGeologists discover signs of volcanoes blowing their tops in the deep ocean
A research team led by the Woods Hole Oceanographic Institution (WHOI) has uncovered evidence of explosive volcanic eruptions deep beneath the ice-covered surface of the Arctic Ocean.
SEX4, starch and phosphorylation
Energy from the sun and carbon dioxide fuel photosynthesis in plants and algae, making life on earth possible. Carbon that is fixed by plants is converted to starch and sucrose, which are utilized by plants for energy and to build biomass.
Looming tropical disaster needs urgent action
A major review by University of Adelaide researchers shows that the world is losing the battle over tropical habitat loss with potentially disastrous implications for biodiversity and human well-being.
Major progress in technology needed for 25 percent renewable energy use to be affordable
Dramatic progress in renewable energy technology is needed if the United States desires to produce 25 percent of its electricity and motor vehicle fuel from renewable sources by 2025 without significantly increasing consumer costs.
Climate change could severely impact California's unique native plants
The native plants unique to California are so vulnerable to global climate change that two-thirds of these "endemics" could suffer more than an 80 percent reduction in geographic range by the end of the century.
Desert plant may hold key to surviving food shortage
The plant, Kalanchoe fedtschenkoi, is unique because, unlike normal plants, it captures most of its carbon dioxide at night when the air is cooler and more humid, making it 10 times more water-efficient than major crops such as wheat. Scientists will use the latest next-generation DNA sequencing to analyse the plant's genetic code and understand how these plants function at night.
Ancient mineral shows early Earth climate tough on continents
A new analysis of ancient minerals called zircons suggests that a harsh climate may have scoured and possibly even destroyed the surface of the Earth's earliest continents.
Permafrost Threatened by Rapid Retreat of Arctic Sea Ice, NCAR Study Finds
The rate of climate warming over northern Alaska, Canada, and Russia could more than triple during periods of rapid sea ice loss, according to a new study led by the National Center for Atmospheric Research (NCAR).
Carbon emissions trading in Europe: Lessons to be learned
For the past three years, the European Union has been operating the world's largest emissions trading system and the first system to limit and to trade carbon dioxide emissions.
Are microbes the answer to the energy crisis?
The answer to the looming fuel crisis in the 21st century may be found by thinking small, microscopic in fact. Microscopic organisms from bacteria and cyanobacteria, to fungi to microalgae, are biological factories that are proving to efficient sources of inexpensive, environmentally friendly biofuels that can serve as alternatives to oil, according to research presented at the 108th General Meeting of the American Society for Microbiology in Boston.
More Carbon Dioxide News Articles
| © 2008 BrightSurf.com |