 |
|
Tiny Torrents
March 19, 2008Engineers harnessing the same physical property that drives silent household air purifiers have created a miniaturized device that is now ready for testing as a silent, ultra-thin, low-power and low maintenance cooling system for laptop computers and other electronic devices.
The compact, solid-state fan, developed with support from NSF's Small Business Innovation Research program, is the most powerful and energy efficient fan of its size. It produces three times the flow rate of a typical small mechanical fan and is one-fourth the size.
Dan Schlitz and Vishal Singhal of Thorrn Micro Technologies, Inc., of Marietta, Ga. will present their RSD5 solid-state fan at the 24th Annual Semiconductor Thermal Measurement, Modeling and Management Symposium (Semi-Therm) in San Jose, Calif., on March 17, 2008. The device is the culmination of six years of research that began while the researchers were NSF-supported graduate students at Purdue University.
"The RSD5 is one of the most significant advancements in electronics cooling since heat pipes. It could change the cooling paradigm for mobile electronics," said Singhal.
The RSD5 incorporates a series of live wires that generate a micro-scale plasma (an ion-rich gas that has free electrons that conduct electricity). The wires lie within un-charged conducting plates that are contoured into half-cylindrical shape to partially envelop the wires.
Within the intense electric field that results, ions push neutral air molecules from the wire to the plate, generating a wind. The phenomenon is called corona wind.
"The technology is a breakthrough in the design and development of semiconductors as it brings an elegant and cost effective solution to the heating problems that have plagued the industry," said Juan Figueroa, the NSF SBIR program officer who oversaw the research.
With the breakthrough of the contoured surface, the researchers were able to control the micro-scale discharge to produce maximum airflow without risk of sparks or electrical arcing. As a result, the new device yields a breeze as swift as 2.4 meters per second, as compared to airflows of 0.7 to 1.7 meters per second from larger, mechanical fans.
The contoured platform is a part of the device heat sink, a trick that enabled Schlitz and Singhal to both eliminate some of the device's bulk and increase the effectiveness of the airflow.
"The technology has the power to cool a 25-watt chip with a device smaller than 1 cubic-cm and can someday be integrated into silicon to make self-cooling chips," said Schlitz.
This device is also more dust-tolerant than predecessors. While dust attraction is ideal for living-room-scale fans that that provide both air flow and filtration, debris can be a devastating obstacle when the goal is to cool an electrical component.
The National Science Foundation (NSF)
"The RSD5 is one of the most significant advancements in electronics cooling since heat pipes. It could change the cooling paradigm for mobile electronics," said Singhal.
The RSD5 incorporates a series of live wires that generate a micro-scale plasma (an ion-rich gas that has free electrons that conduct electricity). The wires lie within un-charged conducting plates that are contoured into half-cylindrical shape to partially envelop the wires.
Within the intense electric field that results, ions push neutral air molecules from the wire to the plate, generating a wind. The phenomenon is called corona wind.
"The technology is a breakthrough in the design and development of semiconductors as it brings an elegant and cost effective solution to the heating problems that have plagued the industry," said Juan Figueroa, the NSF SBIR program officer who oversaw the research.
With the breakthrough of the contoured surface, the researchers were able to control the micro-scale discharge to produce maximum airflow without risk of sparks or electrical arcing. As a result, the new device yields a breeze as swift as 2.4 meters per second, as compared to airflows of 0.7 to 1.7 meters per second from larger, mechanical fans.
The contoured platform is a part of the device heat sink, a trick that enabled Schlitz and Singhal to both eliminate some of the device's bulk and increase the effectiveness of the airflow.
"The technology has the power to cool a 25-watt chip with a device smaller than 1 cubic-cm and can someday be integrated into silicon to make self-cooling chips," said Schlitz.
This device is also more dust-tolerant than predecessors. While dust attraction is ideal for living-room-scale fans that that provide both air flow and filtration, debris can be a devastating obstacle when the goal is to cool an electrical component.
The National Science Foundation (NSF)
Cooling System News and Current Cooling System Events RSSTiny refrigerator taking shape to cool future computers
Researchers at Purdue University are developing a miniature refrigeration system small enough to fit inside laptops and personal computers, a cooling technology that would boost performance while shrinking the size of computers.
NCAR Installs 76-Teraflop Supercomputer for Critical Research on Climate Change, Severe Weather
The National Center for Atmospheric Research (NCAR) has taken delivery of a new IBM supercomputer that will advance research into severe weather and the future of Earth's climate. The supercomputer, known as a Power 575 Hydro- Cluster, is the first in a highly energy-efficient class of machines to be shipped anywhere in the world.
Racing Ahead at the Speed of Light
Imagine trying to catch up to something moving close to the speed of light - the fastest anything can move - and sending ahead information in time to make mid-path flight corrections. Impossible? Not quite.
Johns Hopkins housing and testing only 256-slice CT scanner in North America
Johns Hopkins Medicine has installed for three months of initial safety and clinical testing a 256-slice computed tomography (CT) scanner, believed to be the world's most advanced CT imaging software and machinery.
Introducing the 'coolest' spacecraft in the universe
The European Space Agency's (ESA) Planck mission, which will study the conditions present in our Universe shortly after the Big Bang, is reaching an important milestone with the integration of instruments into the satellite at Alcatel Alenia Space in Cannes, France.
Tiny ion pump sets new standard in cooling hot computer chips
University of Washington researchers have succeeded in building a cooling device tiny enough to fit on a computer chip that could work reliably and efficiently with the smallest microelectronic components.
Keeping cool in a war zone: Device promises relief for desert soldiers
One of the deadliest obstacles soldiers in desert war zones have to face is heat. The gear soldiers wear and carry can contribute 10 additional degrees to the outside temperature, a dangerously significant increase on a 95-degree day, for instance.
Micro-pump is cool idea for future computer chips
Engineers at Purdue University have developed a tiny "micro-pump" cooling device small enough to fit on a computer chip that circulates coolant through channels etched into the chip.
Space suit technology can protect workers from heatstroke
The technology used in space suits to protect astronauts carrying out space walks in direct sunlight is now being used to develop protective clothing to safeguard firefighters and steel workers who often work in extremely hot and dangerous conditions.
Purdue engineers create safer, more efficient nuclear fuel, model its performance
Purdue University nuclear engineers have developed an advanced nuclear fuel that could save millions of dollars annually by lasting longer and burning more efficiently than conventional fuels, and researchers also have created a mathematical model to further develop the technology.
More Cooling System News Articles
 | The Solar House: Passive Heating and Cooling by Daniel D. Chiras Passive solar heating and passive cooling--approaches known as natural conditioning--provide comfort throughout the year by reducing, or eliminating, the need for fossil fuel. Yet while heat from sunlight and ventilation from breezes is free for the taking, few modern architects or builders really understand the principles involved. Now Dan Chiras, author of the popular book The Natural House,... |
 | Troubleshooting Marine Diesels by Peter Compton This densely illustrated, hands-on guide to diesel engine maintenance, troubleshooting, and repair renders its subject more user-friendly than ever before. Finally, boatowners who grew up with gas engines can set aside their fears about tinkering with diesels, which are safer and increasingly more prevalent. As in other volumes in the International Marine Sailboat Library, every step of every... |
 | Engine Cooling Systems HP1425: Cooling System Theory, Design and Performance For Drag Racing, Road Racing,Circle Track, Street Rods, Musclecars, Imports, OEM Cars, Trucks, RVs and T by Ray T. Bohacz A comprehensive guide to one of the most important, but often neglected, areas of performance: the cooling system. Includes information on basic engine cooling theory, as well as all components such as water pumps, radiators, coolant and thermostatic... |
| Environmental Control Systems: Heating, Cooling, Lighting by Fuller Moore A text/reference for Architect and Architectural Engineering students taking a course on Energy Methods. Includes passive solar heating and cooling, day-lighting,... | |
 | The Nalco Guide to Cooling-Water Systems Failure Analysis by Nalco Company This is a concise, authoritative guide to the identification and elimination of corrosion in cooling water systems and related equipment--from a leader in the field. Abundant full color photographs of actual failures illustrate the detailed description of each common failure mode presented. Case histories follow each chapter. A wide variety of environments and equipment are presented, including:... |
 | Automotive Cooling System Basics by Randy Rundle |
 | Stratosphere Troposphere Interactions: An Introduction by K. Mohanakumar This textbook describes various physical, radiative, dynamical and chemical processes involved in the coupling between the Stratosphere and Troposphere. This textbook is intended for graduate students in middle atmosphere stratospheric physics, dynamic and atmospheric science courses and will be useful to all research workers in meteorology, aeronomy, atmospheric physics, atmospheric chemistry... |
 | Liquid Cooling of Electronic Devices by Single-Phase Convection (Thermal Management of Microelectronic and Electronic System Series) by Frank P. Incropera Channeling or controlling the heat generated by electronics products is a vital concern of product developers: fail to confront this issue and the chances of product failure escalate. This third book in the series explores yet another method of heat management-the use of liquids to absorb and remove heat away from vital parts of the electronic... |
 | Engineering Weather Data by Michael J. Kjelgaard One-stop weather database A valuable weather data resource for engineers and project managers, Michael Kjelgaard’s Engineering Weather Data is loaded with data you’ll find essential for designing buildings and HVAC systems in cities with different climates. You get table after table of important weather statistics, organized by city for easy look-up, including tables of weather... |
 | Software Engineering for Real-Time Systems by Jim Cooling This book is a comprehensive introduction to the systematic design of real-time and embedded software systems. It is written in an accessible style and complemented by numerous diagrams, the reader is guided through the steps of a total design approach, from the initial definition of the task all the way through to documentation. The text provides arguments, examples, techniques, and... |
| © 2008 BrightSurf.com |