|
Findings could improve fuel cell efficiency
March 20, 2008DURHAM, N.C. -- A new type of membrane based on tiny iron particles appears to address one of the major limitations exhibited by current power-generating fuel cell technology.
While there are many types of fuel cells, in general they generate electricity as the result of chemical reactions between an external fuel -- most commonly hydrogen -- and an agent that reacts with it. The membrane that separates the two parts of the cell and facilitates the reaction is a key factor in determining the efficiency of the cell.
Fuel cells are commonly used in such settings as satellites, submarines or remote weather stations because they have no moving parts, do not require combustion and can run unattended for long periods of time. However, current fuel cells lose efficiency as the temperature rises and the humidity falls.
Researchers at Duke University's Pratt School of Engineering have developed a membrane that allows fuel cells to operate at low humidity and theoretically to operate at higher temperatures. They reported their findings online in the Journal of Membrane Science.
"The current gold standard membrane is a polymer that needs to be in a humid environment in order to function efficiently," said Mark Wiesner, Ph.D., a Duke civil engineer and senior author of the paper. "If the polymer membrane dries out, its efficiency drops. We developed a ceramic membrane made of iron nanoparticles that works at much lower humidities. And because it is a ceramic, it should also tolerate higher temperatures.
"If the next series of tests proves that fuel cells with these new membranes perform well at high temperatures, we believe it might attract the type of investment needed to bring this technology to the market," Wiesner added.
The membrane most commonly used today, known as Nafion, was discovered in the 1960s. As the temperature rises, the polymer becomes unstable and the membranes dehydrate, leading to a loss of performance.
In addition to its temperature and heat limitations, Nafion is also much more expensive to produce than the new membrane, Wiesner said, adding that membranes make up as much as 40 percent of the overall cost of fuel cells.
Wiesner said he believes that future experiments will demonstrate the new membrane's ability to operate at higher temperatures.
"The efficiency of current membranes drops significantly at temperatures over 190 degrees Fahrenheit," he explained. "However, the chemical reactions that create the electricity are more efficient at high temperatures, so it would be a big improvement for fuel cell technology to make this advance."
An interesting outcome of these experiments is leading Wiesner down a new and related research path. As a result of the chemical reactions that create the electricity, small amounts of water are created as a byproduct.
"In the current technology, this water is used by the system to maintain the humidity within the cell," Wiesner said. "The water produced in these reactions is of high purity. So, if a fuel cell membrane could be developed that wasn't reliant on humidity, this water could be used for other purposes."
In addition to these experiments, Wiesner's team plans to study new ways of fabricating the membranes to improve their durability and flexibility.
Duke University
Researchers at Duke University's Pratt School of Engineering have developed a membrane that allows fuel cells to operate at low humidity and theoretically to operate at higher temperatures. They reported their findings online in the Journal of Membrane Science.
"The current gold standard membrane is a polymer that needs to be in a humid environment in order to function efficiently," said Mark Wiesner, Ph.D., a Duke civil engineer and senior author of the paper. "If the polymer membrane dries out, its efficiency drops. We developed a ceramic membrane made of iron nanoparticles that works at much lower humidities. And because it is a ceramic, it should also tolerate higher temperatures.
"If the next series of tests proves that fuel cells with these new membranes perform well at high temperatures, we believe it might attract the type of investment needed to bring this technology to the market," Wiesner added.
The membrane most commonly used today, known as Nafion, was discovered in the 1960s. As the temperature rises, the polymer becomes unstable and the membranes dehydrate, leading to a loss of performance.
In addition to its temperature and heat limitations, Nafion is also much more expensive to produce than the new membrane, Wiesner said, adding that membranes make up as much as 40 percent of the overall cost of fuel cells.
Wiesner said he believes that future experiments will demonstrate the new membrane's ability to operate at higher temperatures.
"The efficiency of current membranes drops significantly at temperatures over 190 degrees Fahrenheit," he explained. "However, the chemical reactions that create the electricity are more efficient at high temperatures, so it would be a big improvement for fuel cell technology to make this advance."
An interesting outcome of these experiments is leading Wiesner down a new and related research path. As a result of the chemical reactions that create the electricity, small amounts of water are created as a byproduct.
"In the current technology, this water is used by the system to maintain the humidity within the cell," Wiesner said. "The water produced in these reactions is of high purity. So, if a fuel cell membrane could be developed that wasn't reliant on humidity, this water could be used for other purposes."
In addition to these experiments, Wiesner's team plans to study new ways of fabricating the membranes to improve their durability and flexibility.
Duke University
Fuel Cell News and Current Fuel Cell Events RSSFuel from food waste: bacteria provide power
Researchers have combined the efforts of two kinds of bacteria to produce hydrogen in a bioreactor, with the product from one providing food for the other.
Metals Shape Up with a Little Help from Friends
For 5,000 years the only way to shape metal has been by the "heat and beat" technique. Even with modern nanotechnology, metalworking involves carving metals with electron beams or etching them with acid.
Oxygen ions for fuel cells get loose at low(er) temperatures
Seeking to understand a new fuel cell material, a research team working at the National Institute of Standards and Technology (NIST), in collaboration with the University of Liverpool, has uncovered a novel structure that moves oxygen ions through the cell at substantially lower temperatures than previously thought possible.
MIT creates new material for fuel cells
MIT engineers have improved the power output of one type of fuel cell by more than 50 percent through technology that could help these environmentally friendly energy storage devices find a much broader market, particularly in portable electronics.
Argonne tests validate BMW Hydrogen 7 emissions well-below SULEV
Independent tests conducted by engineers at the U.S. Department of Energy's (DOE) Argonne National Laboratory on a BMW Hydrogen 7 Mono-Fuel demonstration vehicle have found that the car's hydrogen-powered engine surpasses the super-ultra low-emission vehicle (SULEV) level, the most stringent emissions performance standard to date.
U of M researchers discover key for converting waste to electricity
Researchers at the University of Minnesota studying bacteria capable of generating electricity have discovered that riboflavin (commonly known as vitamin B-2) is responsible for much of the energy produced by these organisms.
The trouble with hybrids
Hybrid electric vehicles that run on both conventional gasoline and stored electricity can be no more than a stop gap until more sustainable technology is developed, according to researchers in France.
Rounding up gases, nano-style
A new process for catching gas from the environment and holding it indefinitely in molecular-sized containers has been developed by a team of University of Calgary researchers, who say it represents a novel method of gas storage that could yield benefits for capturing, storing and transporting gases more safely and efficiently.
Feeling the Heat: Berkeley Researchers Make Thermoelectric Breakthrough in Silicon Nanowires
Energy now lost as heat during the production of electricity could be harnessed through the use of silicon nanowires synthesized via a technique developed by researchers with the U.S. Department of Energy's (DOE) Lawrence Berkeley National Laboratory (Berkeley Lab) and the University of California (UC) at Berkeley.
Life at the jolt
Researchers at the Biodesign Institute are using the tiniest organisms on the planet 'bacteria' as a viable option to make electricity. In a new study featured in the journal Biotechnology and Bioengineering, lead author Andrew Kato Marcus and colleagues Cesar Torres and Bruce Rittmann have gained critical insights that may lead to commercialization of a promising microbial fuel cell (MFC) technology.
More Fuel Cell News Articles
| © 2008 BrightSurf.com |