|
Getting warmer -- Leeds research brings terahertz closer to everyday use
March 31, 2008A collaboration between the Universities of Leeds and Harvard has turned the heat up on terahertz technology, bringing a handheld terahertz device a step closer to reality.
The Leeds team, led by Professors Edmund Linfield and Giles Davies from the Faculty of Engineering, has recorded the highest operating temperature for a terahertz quantum cascade laser - a technology that scientists believe may unlock the potential of the terahertz frequency range.
Professor Linfield explains: "The potential uses for terahertz technology are huge, but at the moment they are limited to niche applications in, for example, the pharmaceutical industry and astronomy, as the current systems on the market are expensive and physically quite large. The availability of cheap, compact systems would open up a wide range of opportunities in fields including industrial process monitoring, atmospheric science, and medicine."
Key to exploiting terahertz technology is the production of handheld devices, and one specific type of laser - the quantum cascade laser - will allow the creation of a terahertz device that is small and portable. The problem is, at the moment this type of laser will only function at temperatures of minus 100°C.
So the challenge is to create a terahertz quantum cascade laser which will work at room temperature. While the groups from Leeds and Harvard are still a way off from this, they have succeeded in increasing the laser's operating temperature by nearly ten degrees, and believe they have the means to improve it yet further.
"We hope to obtain further advances by optimising the methods we used to create the device," explains Professor Linfield. "We have some radically new design ideas, and also believe that we can make significant improvements in the way we fabricate the lasers."
Terahertz quantum cascade lasers are created by building layers of compounds of aluminium, gallium and arsenic one atomic monolayer at a time, through a process known as molecular beam epitaxy. Leeds' Faculty of Engineering is one of a small number of laboratories in the world actively 'growing' terahertz quantum cascade lasers at this time, using a molecular beam epitaxy system purchased through the Science Research Infrastructure Fund (SRIF).
In molecular beam epitaxy, the chemicals evaporate from heated cells, and land on a heated, rotating, substrate. Minute changes in temperature, combined with a set of shutters that block the chemical beams, enable the team to adjust the amount of each chemical which is deposited on the substrate, gradually building up the layers they need. To ensure the device works perfectly, there must be no pollutants, so the process is carried out under ultra-high vacuum conditions, approaching the vacuum levels found in outer space.
The equipment and expert use of it by Professor Linfield and his team enabled them to create a device of superior quality. They now believe that they can bring handheld terahertz technology a step closer still.
University of Leeds
Key to exploiting terahertz technology is the production of handheld devices, and one specific type of laser - the quantum cascade laser - will allow the creation of a terahertz device that is small and portable. The problem is, at the moment this type of laser will only function at temperatures of minus 100°C.
So the challenge is to create a terahertz quantum cascade laser which will work at room temperature. While the groups from Leeds and Harvard are still a way off from this, they have succeeded in increasing the laser's operating temperature by nearly ten degrees, and believe they have the means to improve it yet further.
"We hope to obtain further advances by optimising the methods we used to create the device," explains Professor Linfield. "We have some radically new design ideas, and also believe that we can make significant improvements in the way we fabricate the lasers."
Terahertz quantum cascade lasers are created by building layers of compounds of aluminium, gallium and arsenic one atomic monolayer at a time, through a process known as molecular beam epitaxy. Leeds' Faculty of Engineering is one of a small number of laboratories in the world actively 'growing' terahertz quantum cascade lasers at this time, using a molecular beam epitaxy system purchased through the Science Research Infrastructure Fund (SRIF).
In molecular beam epitaxy, the chemicals evaporate from heated cells, and land on a heated, rotating, substrate. Minute changes in temperature, combined with a set of shutters that block the chemical beams, enable the team to adjust the amount of each chemical which is deposited on the substrate, gradually building up the layers they need. To ensure the device works perfectly, there must be no pollutants, so the process is carried out under ultra-high vacuum conditions, approaching the vacuum levels found in outer space.
The equipment and expert use of it by Professor Linfield and his team enabled them to create a device of superior quality. They now believe that they can bring handheld terahertz technology a step closer still.
University of Leeds
Quantum Cascade News and Current Quantum Cascade Events RSSEngineers demonstrate first room-temperature semiconductor source of coherent Terahertz radiation
Engineers and applied physicists from Harvard University have demonstrated the first room-temperature electrically-pumped semiconductor source of coherent Terahertz (THz) radiation, also known as T-rays. The breakthrough in laser technology, based upon commercially available nanotechnology, has the potential to become a standard Terahertz source to support applications ranging from security screening to chemical sensing.
Compact, wavelength-on-demand Quantum Cascade Laser chip offers ultra-sensitive chemical sensing
Engineers from Harvard University have demonstrated a highly versatile, compact and portable Quantum Cascade Laser sensor for the fast detection of a large number of chemicals, ranging from infinitesimal traces of gases to liquids, by broad tuning of the emission wavelength.
Harvard University engineers demonstrate quantum cascade laser nanoantenna
In a major feat of nanotechnology engineering researchers from Harvard University have demonstrated a laser with a wide-range of potential applications in chemistry, biology and medicine.
Laser sets records in power and energy efficiency
The rise in global terrorism in recent years has brought significant attention to the needs for more advanced sensors and defense technologies to protect civilians and soldiers.
New sensor detects gaseous chemical weapon surrogates in 45 seconds
Using lasers and tuning forks, researchers at Pacific Northwest National Laboratory have developed a chemical weapon agent sensing technique that promises to meet or exceed current and emerging defense and homeland security chemical detection requirements.
Diode laser could be vital for safeguarding aircraft
Terrorists can strike anywhere, at any time, and aircraft, both military and civilian, are targets for heat-seeking missiles, one of many tactics in use by groups hostile to the United States.
Tiny infrared laser holds promise as weapon against terror
The difficulty of detecting the presence of explosives and chemical warfare agents (CWAs) is once again all too apparent in the news about the London bombings.
Physics World Digest: June 2002 edition
PET targets small animals Finding new drugs for deadly diseases like cancer or Alzheimer`s is no easy task. Suitable drugs first have to be discovered and then tested to ensure that they work properly and without side effects. One way of speeding up the process is to use positron emission tomography (PET). It provides three-dimensional images of the human body by measuring the effect of a radioactive tracer that has been attached to a drug and injected into the body. Simon Cherry from the University of California describes how his group have developed miniature PET scanners that can be used on animals such as mice, which share about 95 percent of their genes with humans. Understanding how pa
Nature press release for 21 February issue
[415859] CLONING: MEET 'CC:', THE CARBON-COPY CAT (p859) Researchers announce the birth of the first cloned cat, in a Brief Communication to Nature published online this week. The kitten, called 'Cc:' and now almost two months old, appears healthy and energetic, although she is completely unlike her tabby surrogate mother. Mark Westhusin and colleagues at Texas A&M University, College Station, created Cc: by transplanting DNA from a female three-coloured (tortoiseshell or calico) cat into an egg cell whose nucleus had been removed, and then implanting this embryo into the surrogate mother. Cc:`s coat colour suggests that she is a clone, and a genetic match between Cc: and the donor mother co
More Quantum Cascade News Articles
| © 2008 BrightSurf.com |