 |
|
Nanoengineered barrier invented to protect plastic electronics from water degradation
April 29, 2008World's best protection from moisture and oxygen
A breakthrough barrier technology from Singapore A*STAR's Institute of Materials Research and Engineering (IMRE) protects sensitive devices like organic light emitting diodes (OLEDs) and solar cells from moisture 1000 times more effectively than any other technology available in the market, opening up new opportunities for the up-and-coming plastic electronics sector.
A team of scientists from Singapore's Institute of Materials Research and Engineering (IMRE) has developed a new patented film that has the highest reported water vapour barrier performance to date, as tested by the UK Centre for Process Innovation.
The tests have shown that the new film is 1,000 times more impervious to moisture than existing technologies. This means a longer lifetime for plastic electronic devices such as solar cells and flexible displays that use these high-end films but whose sensitive organic materials are easily degraded by water vapour and oxygen.
The new technology is a boon to the burgeoning plastic electronics industry that aims to deliver flexible, lightweight and cheap electronics products to consumers in ways that silicon electronics may never reach such as disposable or wraparound displays, cheap identification tags, low cost solar cells and chemical and pressure sensitive sensors.
A research institute of the Singapore's Agency of Science, Technology and Research (A*STAR), IMRE's breakthrough technology comes as Singapore seeks to jumpstart a plastic electronics industry locally as part of the country's long-term plan to anchor new knowledge-intensive industries in the economy.
The global plastic electronics industry is projected to grow to a market size of more than US$23 billion in the next 5 years .
The Science - plugging gaps in current technologies:
The performance of devices like organic light emitting diodes (OLEDs) and solar cells is sensitive to moisture because water and oxygen molecules seep past the protective plastic layer over time and degrades the organic materials which form the core of these products.
Current commercially available films used to protect these materials have a barrier property or water vapour transmission rate of about 10-3g/m2 per day, or one thousandth of a gram per square meter per day at 25°C and 90% relative humidity (RH).
However, the ideal film for organic devices would require a barrier property of better than 10-6g/m2/day at 39°C and 90% RH, or one millionth of a gram per square meter per day.
Defects such as pinholes, cracks and grain boundaries are common in thin oxide barrier films when fabricated onto plastic substrates. These defects cause a 'pore effect', where oxygen and water molecules are able to seep through and penetrate the plastic barrier.
Current barrier technologies focus on reducing these defects by using alternate organic and inorganic multi-layers coated on plastic. These multiple layers "stagger" corresponding pores in adjacent layers and create a 'tortuous', lengthy pathway for water and oxygen molecules, making it more difficult to travel through the plastic.
In contrast, IMRE has taken an innovative approach to resolve the 'pore effect' by literally plugging the defects in the barrier oxide films using nanoparticles. This reduces the number of barrier layers needed in the construction of the barrier film down to two layers in this unique nanoengineered barrier stack. IMRE's barrier stack consists of barrier oxide layers and nanoparticulate sealing layers.
The nanoparticles used in the barrier film have a dual function - not only sealing the defects but also actively reacting with and retaining moisture and oxygen.
The result is a breakthrough moisture barrier performance of better than 10-6g/m2/day, or one millionth of a gram per square meter per day, which surpasses the requirements for flexible organic device substrates.
The barrier film also has a lag time of more than 2300 hours at 60°C and 90% RH (i.e. the time required for moisture to pass through the barrier film under those conditions).
These plastic barrier properties were tested and validated by the Centre for Process Innovation, UK.
"With a level of protection that surpasses the ideal requirements for such films to date, manufacturers now have the opportunity to extend the lifetime of plastic electronic devices by leaps and bounds!," says Senthil Ramadas, principal investigator of the project.
Research that offers total solutions:
A stumbling block in developing ultra-high barrier substrates has been the availability of an appropriate testing methodology.
Overcoming this hurdle, the IMRE project team has developed a highly sensitive moisture and oxygen permeation measurement system in tandem with the development of the film which is able to effectively measure permeation of less than 10-8g/m2/day. This system has been successfully implemented in a number of service based industry projects.
Adds Senthil, "Together with our expertise in encapsulation processes and permeation measurement technologies we are also able to provide a total solution package for industries such as flexible solar cells and OLED displays producers".
The Next Step:
Recognising the potential of the high performance substrate technology, Exploit Technologies Pte Ltd (ETPL), the commercialisation arm of A*STAR, has funded the team through a 'flagship project' that seeks out research with excellent commercialisation potential.
Boon Swan Foo, the Executive Chairman of ETPL said, "Exploit Technologies sees commercial potential in A*STAR IMRE's breakthrough barrier film technology. It has excellent promise for enabling the fast growing plastic electronics industry. We want to take this technology from the lab to the market."
"The research team is already in talks with solar cells and flexible displays and lighting industry manufacturers who are currently evaluating the barrier films for product qualification", says Dr. Mark Auch, a member of the IMRE team who is actively involved in the commercialization of the technology.
IMRE has already signed agreements with a number of companies to advance the technology into the commercial domain. This includes a collaboration agreement with G24Innovations, a thin film solar cell manufacturer to look into developing the films for use in solar cells.
Clemens Betzel, the president of G24Innovations, who was in Singapore for the signing of the cooperation agreement, said, "The cutting edge work of IMRE's Barrier Substrates is likely to mean significant progress for Dye Sensitized Solar Cells, as exclusively manufactured today by G24I. We are looking forward to broadening our relationship with IMRE in the coming months."
IMRE has also signed a commercialisation agreement with KISCO (Asia), a subsidiary of the Japanese parent company KISCO Ltd., to commercialise and market the barrier films in the Asia Pacific region.
"We have a long-standing research relationship with IMRE and are very familiar with their work. We have high confidence in the quality of IMRE's barrier films and we believe, that this partnership will be beneficial to both parties," says Albin Tan, General Manager of KISCO (Asia), Singapore.
More about IMRE's Barrier Film Technology:
Current barriers have a series of alternating polymer and metal oxide layers that make up the plastic. This staggers adjacent 'pinholes', natural defects in the layers, thus slowing the passage of moisture and air through the 'pinholes'.
The secret behind the effectiveness of IMRE's technology lies in the unique barrier stack design, where nanoparticles are used when layering the barrier films. The design has a special layer of nanoparticles between the "pinhole" oxide layers. The innovativeness becomes clear as the nanoparticles "plug" the gaps and cracks in the oxide layer thus making for a more impermeable layer. In addition to sealing of oxide barrier film's defects, the nanoparticles absorb and retain the water and oxygen molecules. This concept helps reduce the number of barrier stacks to two or three only.
IMRE has successfully resolved the 'pore effect issue' in multi-layered barrier stacks and developed ultra high barrier plastic substrates (barrier properties < 10-6 g/m2/day) for high barrier applications. Our calcium test results show that there is no calcium oxidation up to 2300hrs at 60°C and 90% relative humidity.
Agency for Science, Technology and Research (A*STAR), Singapore
The tests have shown that the new film is 1,000 times more impervious to moisture than existing technologies. This means a longer lifetime for plastic electronic devices such as solar cells and flexible displays that use these high-end films but whose sensitive organic materials are easily degraded by water vapour and oxygen.
The new technology is a boon to the burgeoning plastic electronics industry that aims to deliver flexible, lightweight and cheap electronics products to consumers in ways that silicon electronics may never reach such as disposable or wraparound displays, cheap identification tags, low cost solar cells and chemical and pressure sensitive sensors.
A research institute of the Singapore's Agency of Science, Technology and Research (A*STAR), IMRE's breakthrough technology comes as Singapore seeks to jumpstart a plastic electronics industry locally as part of the country's long-term plan to anchor new knowledge-intensive industries in the economy.
The global plastic electronics industry is projected to grow to a market size of more than US$23 billion in the next 5 years .
The Science - plugging gaps in current technologies:
The performance of devices like organic light emitting diodes (OLEDs) and solar cells is sensitive to moisture because water and oxygen molecules seep past the protective plastic layer over time and degrades the organic materials which form the core of these products.
Current commercially available films used to protect these materials have a barrier property or water vapour transmission rate of about 10-3g/m2 per day, or one thousandth of a gram per square meter per day at 25°C and 90% relative humidity (RH).
However, the ideal film for organic devices would require a barrier property of better than 10-6g/m2/day at 39°C and 90% RH, or one millionth of a gram per square meter per day.
Defects such as pinholes, cracks and grain boundaries are common in thin oxide barrier films when fabricated onto plastic substrates. These defects cause a 'pore effect', where oxygen and water molecules are able to seep through and penetrate the plastic barrier.
Current barrier technologies focus on reducing these defects by using alternate organic and inorganic multi-layers coated on plastic. These multiple layers "stagger" corresponding pores in adjacent layers and create a 'tortuous', lengthy pathway for water and oxygen molecules, making it more difficult to travel through the plastic.
In contrast, IMRE has taken an innovative approach to resolve the 'pore effect' by literally plugging the defects in the barrier oxide films using nanoparticles. This reduces the number of barrier layers needed in the construction of the barrier film down to two layers in this unique nanoengineered barrier stack. IMRE's barrier stack consists of barrier oxide layers and nanoparticulate sealing layers.
The nanoparticles used in the barrier film have a dual function - not only sealing the defects but also actively reacting with and retaining moisture and oxygen.
The result is a breakthrough moisture barrier performance of better than 10-6g/m2/day, or one millionth of a gram per square meter per day, which surpasses the requirements for flexible organic device substrates.
The barrier film also has a lag time of more than 2300 hours at 60°C and 90% RH (i.e. the time required for moisture to pass through the barrier film under those conditions).
These plastic barrier properties were tested and validated by the Centre for Process Innovation, UK.
"With a level of protection that surpasses the ideal requirements for such films to date, manufacturers now have the opportunity to extend the lifetime of plastic electronic devices by leaps and bounds!," says Senthil Ramadas, principal investigator of the project.
Research that offers total solutions:
A stumbling block in developing ultra-high barrier substrates has been the availability of an appropriate testing methodology.
Overcoming this hurdle, the IMRE project team has developed a highly sensitive moisture and oxygen permeation measurement system in tandem with the development of the film which is able to effectively measure permeation of less than 10-8g/m2/day. This system has been successfully implemented in a number of service based industry projects.
Adds Senthil, "Together with our expertise in encapsulation processes and permeation measurement technologies we are also able to provide a total solution package for industries such as flexible solar cells and OLED displays producers".
The Next Step:
Recognising the potential of the high performance substrate technology, Exploit Technologies Pte Ltd (ETPL), the commercialisation arm of A*STAR, has funded the team through a 'flagship project' that seeks out research with excellent commercialisation potential.
Boon Swan Foo, the Executive Chairman of ETPL said, "Exploit Technologies sees commercial potential in A*STAR IMRE's breakthrough barrier film technology. It has excellent promise for enabling the fast growing plastic electronics industry. We want to take this technology from the lab to the market."
"The research team is already in talks with solar cells and flexible displays and lighting industry manufacturers who are currently evaluating the barrier films for product qualification", says Dr. Mark Auch, a member of the IMRE team who is actively involved in the commercialization of the technology.
IMRE has already signed agreements with a number of companies to advance the technology into the commercial domain. This includes a collaboration agreement with G24Innovations, a thin film solar cell manufacturer to look into developing the films for use in solar cells.
Clemens Betzel, the president of G24Innovations, who was in Singapore for the signing of the cooperation agreement, said, "The cutting edge work of IMRE's Barrier Substrates is likely to mean significant progress for Dye Sensitized Solar Cells, as exclusively manufactured today by G24I. We are looking forward to broadening our relationship with IMRE in the coming months."
IMRE has also signed a commercialisation agreement with KISCO (Asia), a subsidiary of the Japanese parent company KISCO Ltd., to commercialise and market the barrier films in the Asia Pacific region.
"We have a long-standing research relationship with IMRE and are very familiar with their work. We have high confidence in the quality of IMRE's barrier films and we believe, that this partnership will be beneficial to both parties," says Albin Tan, General Manager of KISCO (Asia), Singapore.
More about IMRE's Barrier Film Technology:
Current barriers have a series of alternating polymer and metal oxide layers that make up the plastic. This staggers adjacent 'pinholes', natural defects in the layers, thus slowing the passage of moisture and air through the 'pinholes'.
The secret behind the effectiveness of IMRE's technology lies in the unique barrier stack design, where nanoparticles are used when layering the barrier films. The design has a special layer of nanoparticles between the "pinhole" oxide layers. The innovativeness becomes clear as the nanoparticles "plug" the gaps and cracks in the oxide layer thus making for a more impermeable layer. In addition to sealing of oxide barrier film's defects, the nanoparticles absorb and retain the water and oxygen molecules. This concept helps reduce the number of barrier stacks to two or three only.
IMRE has successfully resolved the 'pore effect issue' in multi-layered barrier stacks and developed ultra high barrier plastic substrates (barrier properties < 10-6 g/m2/day) for high barrier applications. Our calcium test results show that there is no calcium oxidation up to 2300hrs at 60°C and 90% relative humidity.
Agency for Science, Technology and Research (A*STAR), Singapore
Plastic Electronics Current Events and Plastic Electronics News RSSPaper battery may power electronics in clothing and packaging material
Imagine a gift wrapped in paper you really do treasure and want to carefully fold and save. That's because the wrapping paper lights up with words like "Happy Birthday" or "Happy Holidays," thanks to a built in battery - an amazing battery made out of paper.
A bright future for plastics -- robot 'skin,' flexible laptops and electric posters
With market analysts predicting a ten fold increase in the value of the organic light emitting display industry, from £1.5 billion to £15.5 billion, by 2014, it is no wonder that scientists and governments alike are keen to advance research into "plastic electronics".
Carnegie Mellon U. chemists advance organic semiconductor processing
Any machinist will tell you that a little grease goes a long way toward making a tool work better. And that may soon hold true for plastic electronics as well.
Electronic displays that fit on clothing could power revolution in lighting
A thin film of plastic which conducts electricity and produces solar power could be the basis for a revolution in the way we light our homes and design clothes.
Advancing How Computers and Electronics Work
Researchers have made an important advance in the emerging field of 'spintronics' that may one day usher in a new generation of smaller, smarter, faster computers, sensors and other devices, according to findings reported in today's issue of the journal Nature Nanotechnology.
Snomipede races to solve the mysteries of life
A multi-disciplinary team of scientists from the Universities of Sheffield, Nottingham, Manchester and Glasgow has been awarded a £3m research grant to develop a new nanotechnology tool which they have called the 'Snomipede'. The team, led by Professor Graham Leggett at the University of Sheffield, hopes that once developed, the Snomipede could enable advances in areas as diverse as the understanding of the origins of disease and the low-cost commercial manufacture of plastic computer chips.
£4M awarded for research in Integrated Electronics
The University of Surrey's Integrated Electronics research programme is one of only eight research teams in the UK to receive one of the new Engineering and Physical Sciences Research Council (EPSRC) Portfolio Partnership Awards being announced at the EPSRC's annual conference in London on Wednesday 3 April 2003. The University of Surrey (UniS) team, led by Professor Ravi Silva, will be awarded funding in excess of £4M over 5 years to further their research in three specific fields. The Portfolio Partnership is fostering the cross-disciplinary activities required to address the 'grand challenges' of the future. Much of the themed research undertaken by the group has relevant interface
Nature press release for 2 August issue
[412543] LIFELINES: POPULATION SET TO PEAK IN 2070 (pp543-545; N&V) The world's population may be heading for a peak as soon as 2070, followed by a decline, suggests a study in this week's Nature. There is an 85 per cent chance that the population will stop growing before 2100. The population could climb to only 8.4 billion by 2100, an estimate about 1 billion short of a United Nations prediction. Portraying a world increasingly dominated by Southern Hemisphere nations, the model also predicts that the proportion of people over age 60 will leap from 10 to 34 per cent. This may be preceded by a "window of opportunity", in which many societies will benefit from a large workforce, says
More Plastic Electronics Current Events and Plastic Electronics News Articles
 |
Electronic Plastic by Lopetz (Author), Büro Destruct (Author), Robert Klanten (Author), Jaro Gielens (Illustrator) Rare collector’s item, retro-futuristic cases, bright logos, elaborate packaging and a generous helping of wistful nostalgia – in Electronic Plastic, a fascinating journey into the product design of the 80’s, Lopetz (Narita Inspected, Buero Destruct) and author Jaro Gielens present more than 380 of the prettiest and craziest handhelds and tabletops from the stone age of consumer electronics in this comprehensive homage. |
 |
Starrett 799A-8/200 Electronic Caliper with Plastic Case, 0-to-8-Inch/0-to-200mm Range by Starrett L.S. Starrett 67412 799a-8/200 8" Electronic Caliper Without Output (1 EA) |
|
Plastic Electronics by Pira International Ltd | |
 |
Cass Creek Plastic Turkey Electronic Call Md: 877 by CASS CREEK INTL LLC Cass Creek Plastic Turkey Electronic Call Md: 877, A great benefit for novice and advanced hunters. Self teaching device with other calls. In field game call application (check where legal) an in class teaching device. In field call reference for sound duplication. Clear and accurate tone, pitch, and rhythm game calls help the hunter make the right call at the right time. Quick call playback for repetitive practice. Field tested and no cumbersome player devices needed for operation. Turkey Call The calls of the wild turkey are quite diverse. Their vocabulary is made up of a number of vocalizations producing sounds with various rhythms and inflections. Cass Creek game calls has captured the 5 most predominant turkey calls: Cluck - A low volume note, or series of notes used as small talk ... |
 |
Electronic Closet Rack Tie Rack by Necktie Accessories - Silver Plastic by Necktie Accessories With so many ties in your collection, you need a serious solution to tie organization and storage. Well, you've finally found it with the Electronic Tie Rack! This tie rack holds an amazing 70 ties along with 4 belts or other accessories. Easily attach this Electronic Tie Rack to any closet rod up to 1 and 3/8 inches in width with confidence. This tie rack attaches securely and stays in place, allowing you to rotate your ties either direction at the push of a button. The built in light automatically turns on and stays on for 10 seconds after you're through browsing your ties for easy, hassle free access. [Neckties not included] (Requires 4 'C' batteries) |
 |
Premium Cool Blue Transparent Hard Plastic Skin for the Blackberry Storm II 9550, 9520 by Lux This premium hard plastic skin will protect your wireless device from scratches and scuffs, keep your wireless device looking like new. This long-lasting durable skin is made with top grade silica gel, not only protects your wireless device, but also giving it a nice soft comfortable surface. With openings for all buttons and connectors, the device is fully functional equiped with this skin. This is the perfect skin if you want high quality material combined with skilled craftmanship. |
 |
Pokemon Charizard Snap-on Electronic Plastic Model Kit by Tomy |
 |
North American Plastics 180869 "Tork intuition" Electronic Towel Dispenser by NORTH AMERICAN PLASTICS "TORK INTUITION" TOWEL DISPENSER 14.5" x 12.25" x 8.125". Made of high impact plastic. Dispenser fits perfectly into a variety of market segments. Durable dispenser provides consistent performance for peace of mind. Hand drying technology and hygiene. |
 |
Deflect-O Classic Image Inclined Counter/Desk Plastic Sign Holder, 8-1/2W X 11H, Clear (DEF69701) by #N/A! Inclined Desk Sign Holders. For use on desk or counter top. Loads from the side. Clear. Classic Image8-1/2w x 11h |
 |
Plastic Mutations - The Electronic Tribute to Radiohead by Various Artists |
| © 2009 BrightSurf.com |