Science Current Events | Science News | Brightsurf.com
 
Email a Friend Send to a friend
Printer Friendly Print Study Finds New Properties in Non-Magnetic Materials

Study Finds New Properties in Non-Magnetic Materials

June 12, 2008

A team of Penn State researchers has shown for the first time that the entire class of non-magnetic materials, such as those used in some computer components, could have considerably more uses than scientists had thought. The findings are important because they reveal previously unknown information about the structure of these materials, expanding the number of properties that they potentially could have. A material's properties, such as electrical conductivity and mechanical strength, are what determine its usefulness. The research will be published in the journal Physical Review Letters.

A material's properties are determined by its structure, explained Venkatraman Gopalan, a researcher in Penn State's Center for Nanoscale Science, a professor of materials science and engineering, and the project's leader. "If I was out hiking and I found a rock that contained a quartz crystal, I could tell you what properties the crystal can and cannot have just based on what we call its symmetry--the number and arrangement of crystal planes it has. Symmetry results from the way the atoms are arranged in the quartz," he said. "It is an extremely powerful way of understanding our world."




The non-magnetic materials that Gopalan and his colleagues studied were thought to have one of the 32 different crystal symmetries--called point group symmetries--known to exist in nature. On the other hand, magnetic materials have 90 different point group symmetries because their atomic particles have magnetic spins, which can be imagined as tiny loops of current. "Motion is an extremely important aspect of magnetism," said Gopalan. "Magnetism develops in nature as soon as charged particles start moving or spinning."

Scientists long have believed that symmetry allows magnetic materials to have more properties than non-magnetic materials because flipping the direction of spin creates an additional symmetry. But Gopalan's team has shown that non-magnetic materials, theoretically, can have just as many properties as magnetic materials. According to Gopalan, some non-magnetic materials have groups of atoms that distort by twisting or rotating. This slight movement is equivalent to a tiny loop of current and is enough to give the material some additional properties that previously were thought to belong only to magnetic materials.

The researchers tested their theory experimentally using strontium titanate, which is a non-magnetic material. They cooled the material and found that its oxygen atoms responded by twisting into a tighter postion to save energy and space. "The oxygen atoms don't rotate all the way around like a loop of current does in magnetic materials, but theoretical analyses show that they do twist and, therefore, it is possible that these materials could have previously unknown properties," said Gopalan.

Next, the team investigated whether the twisting movement translated into the expression of additional properties. In particular, they predicted and tested for an optical property that they call roto second harmonic generation, which is analogous to a well-known property called magnetic second harmonic generation. Second harmonic generation is found, for example, in the crystals that are used in green laser pointers to convert infrared laser light into green laser light. The group found that the strontium titanate material does have a small amount of roto second harmonic generation.

"Nobody has thought of relating magnetic symmetries to a non-magnetic material like strontium titanate, but that's precisely what our paper does," said Gopalan. "We first did a theoretical analysis in which we applied the symmetry framework that traditionally is used to describe magnetic materials to this vast class of non-magnetic materials. Then we did a laboratory experiment with a particular non-magnetic material and we found that it has a property that previously was thought to belong only to magnetic materials. We suggest that it is possible for the entire class of non-magnetic materials to have more symmetries and more properties than previously have been thought possible."

The team's findings could lead to an explosion of research into new properties of non-magnetic materials and to possible applications of these properties. "These materials are used in hundreds of applications," said Peter Schiffer, associate vice president for research and a professor of physics at Penn State, "but this new work holds great promise for finding many more uses."

In addition to Gopalan, the research team included Sava Denev, Amit Kumar, Michael Biegalski, Aravind Vasudevarao, Darrell Schlom, and Susan Trolier-McKinstry from Penn State, and scientists from the University of Wisconsin and the University of Sheffield in the United Kingdom. The team plans to investigate additional non-magnetic materials, with an ultimate goal of producing a new catalog of materials and their properties. This research was funded by the National Science Foundation and the Office of Naval Research.

Eberly College of Science



Related Non-magnetic Materials Current Events and Non-magnetic Materials News Articles
New iron-based and copper-oxide high-temperature
In the initial studies of a new class of high-temperature superconductors discovered earlier this year, research at the Commerce Department's National Institute of Standards and Technology (NIST) has revealed that new iron-based superconductors share similar unusual magnetic properties with previously known superconducting copper-oxide materials.

Nature press release for 19 July issue
[412352] LIFELINES: TRIPLE CHECK (pp352-355; N&V) There are currently two well established main checkpoints in cell division. In this week’s Nature, researchers report a new type of checkpoint in yeast. This finding could lead to a better understanding of how cells form different tissues. For cell division to work, each daughter cell must get one complete set of chromosomes. To achieve this, the chromosomes attach to a framework of proteins called the spindle, which aligns them and pulls them to opposite poles of the cell. The newly discovered checkpoint ensures that the spindle forms in the correct position by monitoring another network of filaments, made of the protein actin, that c
More Non-magnetic Materials Current Events and Non-magnetic Materials News Articles


ISO 2360:2003, Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method
by ISO/TC 107/SC 2

ISO 2360:2003 describes a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic, electrically conductive (generally metallic) basis materials, using amplitude-sensitive eddy current instruments.The method described can also be used to measure non-magnetic metallic coatings on non-conductive basis materials and is particularly applicable to...



ISO 21968:2005, Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
by ISO/TC 107/SC 2

ISO 21968:2005 describes a method of using phase-sensitive eddy-current instruments for non-destructive measurements of the thickness of non-magnetic metallic coatings on metallic and non-metallic basis materials such as zinc, cadmium, copper, tin or chromium on steel, as well as copper or silver on composite materials. The phase-sensitive method can be applied without thickness errors to smaller...

Magnetic filter suits wide range of applications: magnetic fields trap sub-micron ferrous and non-ferrous materials.(Tech Uprade): An article from: Designfax

This digital document is an article from Designfax, published by Nelson Publishing on November 1, 2004. The length of the article is 651 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.Citation DetailsTitle: Magnetic...



Electrical and Magnetic Methods of Non-destructive Testing (Non-Destructive Evaluation Series)
by J. Blitz

This fully revised and thoroughly updated new edition of Electrical and Magnetic Methods of Non-destructive Testing provides a comprehensive account of the subject. The requirements for non-destructive testing are debated along with the criteria for the choice of a given method. This is followed by a summary of the general theory relating to electrical and magnetic testing techniques and a ...



IEC 60404-8-3 Ed. 3.0 b:2005, Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel ... strip delivered in the semi-processed state
by IEC TC/SC 68

Applies to magnetic material intended for the construction of magnetic circuits. These materials correspond respectively to classes C.21 and B.2 of IEC 60404-1: 2000. This standard defines the grades of cold-rolled electrical non-oriented non-alloyed (non alloyed steel is that steel the basic constituent of which is iron containing alloying elements in amounts smaller than the limiting values...



IEC 60404-8-4 Ed. 2.0 b:1998, Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel sheet and strip delivered in the fully-processed state
by IEC TC/SC 68

Defines the grades of cold-rolled non-oriented electrical steel sheet and strip in nominal thicknesses of 0.35 mm, 0.50 mm, 0.65 mm and 1,00 mm. Specifies general requirements, the magnetic properties, geometric characteristics and tolerances, and technological characteristics, as well as the inspection procedure. Applies to materials supplied in the fully annealed condition intended for the...



My World of Science: Magnetic and Non-Magnetic
by Angela Royston

This series introduces the reader to scientific ideas by way of everyday situations and objects that they can recognise in the world around them. Covering a range of basic science topics required by the science curriculum, these books support the QCA KS1 schemes of work. They introduce age-appropriate terminology, present scientific concepts in a straightforward and logical way, and provide...



Nondestructive Testing: Radiography, Ultrasonics, Liquid Penetrant, Magnetic Particle, Eddy Current (#06390G)
by Louis Cartz

Advanced Tomographic Imaging Methods for the Analysis of Materials: Symposium Held November 28-30, 1990, Boston, Massachusetts, U.S.A. (Materials Research Society Symposium Proceedings)
by Jerome L. Ackerman



Electrical and Magnetic Methods of Nondestructive Testing
by J Blitz

Electrical and Magnetic Methods of Nondestructive Testing presents a comprehensive account of the electrical and magnetic methods of nondestructive testing (NDT). The book begins with a discussion of the requirements for NDT and the criteria for the choice of a given method, followed by a summary of the general theory relating to electrical and magnetic testing techniques. Subsequent chapters...

© 2009 BrightSurf.com