NIST and partners identify tiny gold clusters as top-notch catalysts

September 08, 2008

For most of us, gold is only valuable if we possess it in large-sized pieces. However, the "bigger is better" rule isn't the case for those interested in exploiting gold's exceptional ability to catalyze a wide variety of chemical reactions, including the oxidation of poisonous carbon monoxide (CO) into harmless carbon dioxide at room temperatures. That process, if industrialized, could potentially improve the effectiveness of catalytic converters that clean automobile exhaust and breathing devices that protect miners and firefighters. For this purpose, nanoclusters-gold atoms bound together in crystals smaller than a strand of DNA-are the size most treasured.

Using a pair of scanning transmission electron microscopy (STEM) instruments for which spherical aberration (a system fault yielding blurry images) is corrected, researchers at the National Institute of Standards and Technology (NIST), Lehigh University (Bethlehem, Pa.) and Cardiff University (Cardiff, Wales, United Kingdom) for the first time achieved state-of-the-art resolution of the active gold nanocrystals absorbed onto iron oxide surfaces. In fact, the resolution was sensitive enough to even visualize individual gold atoms.

The work is reported in the Sept. 5, 2008, issue of Science.

Surface science studies have suggested that there is a critical size range at which gold nanocrystals supported by iron oxide become highly active as catalysts for CO oxidation. However, the theory is based on research using idealized catalyst models made of gold absorbed on titanium oxide. The NIST/Lehigh/Cardiff aberration-corrected STEM imaging technique allows the researchers to study the real iron oxide catalyst systems as synthesized, identify all of the gold structures present in each sample, and then characterize which cluster sizes are most active in CO conversion.

The research team discovered that size matters a lot-samples ranged from those with little or no catalytic activity (less than 1 percent CO conversion) to others with nearly 100 percent efficiency. Their results revealed that the most active gold nanoclusters for CO conversion are bilayers approximately 0.5-0.8 nanometer in diameter (40 times smaller than the common cold virus) and containing about 10 gold atoms. This finding is consistent with the previous surface science studies done on the gold-titanium oxide models.

National Institute of Standards and Technology (NIST)

---

---

	Iron Oxides in the Laboratory: Preparation and Characterization by Udo Schwertmann (Author), Rochelle M. Cornell (Author) Iron Oxides play an important role in numerous disciplines. Since the publication of the first edition, there has been a surge of interest in synthetic fine to ultrafine iron oxides in a wide range of scientific and technological disciplines, especially in mineralogy, geosciences and environmental science and in various branches of technology. As before, the main aim of the second edition is to present reliable, well-tested, up-to-date methods of synthesizing pure iron oxides. The section on monodispersed particles, presently of great interest to industry, has been expanded. Furthermore the methods of characterization have been focused on their relevance to iron oxides. The well tried syntheses have been retained and some new ones have been incorporated.
	Superparamagnetic Iron Oxide Nanoparticles: Synthesis, Surface Engineering, Cytotoxicity and Biomedical Applications (Nanotechnology Science and Technology) by Morteza Mahmoudi (Author), Pirter Stroeve (Author), Abbas S. Milani (Author), Ali S. Arbab (Author) In recent years, the fabrication of nanoparticles and exploration of their properties have attracted the attention of physicists, chemists, biologists and engineers. Interest in nanoparticles arise from the fact that the mechanical, chemical, electrical, optical, magnetic, electro-optical and magneto-optical properties of these particles are different from their bulk properties and depend on the particle size. There are numerous areas where nanoparticulate systems are of scientific and technological interest. This book reviews research on the various components of superparamagnetic iron oxide nanoparticles.
	The 2009-2014 World Outlook for Iron Oxide Pigments by Icon Group (Author) This econometric study covers the world outlook for iron oxide pigments across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized...
	The 2009-2014 World Outlook for Iron Compounds Excluding Iron Oxides, Hydroxides, and Ferric Chloride by Icon Group (Author) This econometric study covers the world outlook for iron compounds excluding iron oxides, hydroxides, and ferric chloride across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider...
	The World Market for Iron Oxides, Iron Hydroxides, and Earth Colors of 70% or More Combined Iron Evaluated as Fe203 by Weight: A 2009 Global Trade Perspective by Icon Group International (Author) This report was created for strategic planners, international executives and import/export managers who are concerned with the market for iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of...
	The 2009 World Forecasts of Iron Oxides, Iron Hydroxides, and Earth Colors of 70% or More Combined Iron Evaluated as Fe203 by Weight Export Supplies by Icon Group International (Author) This report was created for strategic planners, international marketing executives and export managers whose primary concern is the world market for iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight for those firms serving the world via exports and foreign direct investment. It does so for the current year based on a variety of key historical...
	The 2009 World Market Forecasts for Imported Iron Oxides, Iron Hydroxides, and Earth Colors of 70% or More Combined Iron Evaluated as Fe203 by Weight by Icon Group International (Author) This report was created for strategic planners, international marketing executives and export managers whose primary concern is the world market for iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight for those firms serving the world via exports and foreign direct investment. It does so for the current year based on a variety of key historical...
	The 2009 Report on Iron Oxide Pigments: World Market Segmentation by City by Icon Group International (Author) This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a "borderless world", cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market. In performing various economic analyses for its clients, I have been occasionally asked...
	The 2009 Report on Iron Compounds Excluding Iron Oxides, Hydroxides, and Ferric Chloride: World Market Segmentation by City by Icon Group International (Author) This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a "borderless world", cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market. In performing various economic analyses for its clients, I have been occasionally asked...
	The 2009 Import and Export Market for Iron Oxides, Iron Hydroxides, and Earth Colors of 70% or More Combined Iron Evaluated as Fe203 by Weight in Europe by Icon Group International (Author) On the demand side, exporters and strategic planners approaching the market in Europe face a number of questions. Which countries are supplying iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight to Europe? What is the dollar value of these imports? How much do the imports of iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight vary from one country to another in Europe? Do exporters serving the market in Europe have similar market shares across the importing countries? On the supply side, Europe also sells to the international market of iron oxides, iron hydroxides, and earth colors of 70% or more combined iron evaluated as fe203 by weight. Which countries in Europe supply the most...