 |
|
New research shows why metal alloys degrade
September 25, 2008ANN ARBOR, Mich.---Metal alloys can fail unexpectedly in a wide range of applications---from jet engines to satellites to cell phones---and new research from the University of Michigan helps to explain why.
Metal alloys are solids made from at least two different metallic elements. The elements are often mixed together as liquid, and when they "freeze," into solids, tiny grains of crystal form to create a polycrystalline material. A polycrystalline material is made of multiple crystals.
Within each of the grains of crystal, atoms are arranged in a periodic pattern. This pattern isn't perfect, though. For example, some of the places atoms should be are empty. These empty spaces are called vacancies. Atoms of each element in the alloy take advantage of these holes in the lattice. In a process called diffusion, atoms hop through the material, changing its structure.
"It's kind of like musical chairs," said Katsuyo Thornton, assistant professor in the U-M Department of Materials Science and Engineering. "Diffusion happens in nearly every material, and materials can degrade because diffusion causes certain changes in the structure of the material."
Atoms of different elements tend to hop at different rates because they are bound to their surrounding atoms with varying strength. Thornton and her colleagues have demonstrated that when there's a greater discrepancy in the hop rates in the different elements in the alloy, there's a more pronounced diffusion along grain boundaries. This possibly leads to a faster degradation. Thornton's collaborators on this project are Materials Science and Engineering doctoral student Hui-Chia Yu, and Anton Van der Ven, an assistant professor in the same department.
"In some cases, the grain-boundary diffusion is 100 times higher than what was commonly expected," Thornton said.
"This is a very generic finding," she said. "That's why it's important. It applies to a wide variety of materials. It applies to polycrystalline materials including electronic materials like solder."
Conventional solder, made of tin and lead, is a common alloy that connects electronic components in computer circuit boards and gadgets. Because lead is toxic, engineers are working to design new kinds of solder without lead. But they haven't found a substitute that works as well. The team's findings may help explain why "tin whiskers" form in some of these new solders. Tin whiskers have caused damage to satellites, for example.
"We are trying to apply this theory to whisker growth in solder," Thornton said.
This finding suggests that materials scientists could make longer-lasting alloys if they use metals with similar atomic hop rates, or manipulate the intrinsic hop rates by other mechanisms.
University of Michigan
"It's kind of like musical chairs," said Katsuyo Thornton, assistant professor in the U-M Department of Materials Science and Engineering. "Diffusion happens in nearly every material, and materials can degrade because diffusion causes certain changes in the structure of the material."
Atoms of different elements tend to hop at different rates because they are bound to their surrounding atoms with varying strength. Thornton and her colleagues have demonstrated that when there's a greater discrepancy in the hop rates in the different elements in the alloy, there's a more pronounced diffusion along grain boundaries. This possibly leads to a faster degradation. Thornton's collaborators on this project are Materials Science and Engineering doctoral student Hui-Chia Yu, and Anton Van der Ven, an assistant professor in the same department.
"In some cases, the grain-boundary diffusion is 100 times higher than what was commonly expected," Thornton said.
"This is a very generic finding," she said. "That's why it's important. It applies to a wide variety of materials. It applies to polycrystalline materials including electronic materials like solder."
Conventional solder, made of tin and lead, is a common alloy that connects electronic components in computer circuit boards and gadgets. Because lead is toxic, engineers are working to design new kinds of solder without lead. But they haven't found a substitute that works as well. The team's findings may help explain why "tin whiskers" form in some of these new solders. Tin whiskers have caused damage to satellites, for example.
"We are trying to apply this theory to whisker growth in solder," Thornton said.
This finding suggests that materials scientists could make longer-lasting alloys if they use metals with similar atomic hop rates, or manipulate the intrinsic hop rates by other mechanisms.
University of Michigan
Metal Alloys Current Events and Metal Alloys News RSSCan Certain Metals Repel Sharks from Fishing Gear?
Sharks in captivity avoid metals that react with seawater to produce an electric field, a behavior that may help fishery biologists develop a strategy to reduce the bycatch of sharks in longline gear.
Quasicrystal mystery unraveled with computer simulation
The method to the madness of quasicrystals has been a mystery to scientists. Quasicrystals are solids whose atoms aren't arranged in a repeating pattern, as they are in ordinary crystals. Yet they form intricate patterns that are technologically useful.
Scientists convert heat to power using organic molecules, may lead to new energy source
Researchers at the University of California, Berkeley, have successfully generated electricity from heat by trapping organic molecules between metal nanoparticles, an achievement that could pave the way toward the development of a new source for energy.
MIT thinks small to find safer metals
MIT researchers have devised a new method for shrinking the size of crystals to make safer metal alloys. The new materials could replace metal coatings such as chromium, which is dangerous for factory workers to produce.
Secrets of the Sea Yield Stronger Artificial Bone
The next generation of artificial bone may rely on a few secrets from the sea. Scientists from the U.S. Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) have harnessed the way seawater freezes to develop a porous, scaffolding-like material that is four times stronger than material currently used in synthetic bone.
Metal Fibers Baked To Make Filters
In automotive catalytic converters and industrial exhaust gas filters, porous materials play a crucial role: they filter and break down hot waste gases. It is now possible to process virtually all metal alloys into fibers which can be used to make open-pored sintered materials. The requirements to be met by a coffee filter are simple: it must retain the powder and not be decomposed by the hot water. The conditions for dealing with exhaust gases in industrial processes are much tougher: temperatures of several hundred degrees and aggressive media are no rarity. In such conditions, manufacturers need different filter materials than cellulose or textiles in order to remove particles and polluta
New, intelligent materials for use in mechanical actuators
A research team at the Department of Physics at the Public University of Navarre are developing new, "intelligent" materials which have the capacity for changing shape when a magnetic field is applied to them. These materials may be used for the generation of ultrasonic signals, in the manufacture of loudspeakers and sonars or in actuators, amongst other applications. The project is a three-year one. Specifically, the group at the Public University of Navarre is working on the optimisation of materials which were discovered at the beginning of the nineties: metal alloys having a ferromagnetic shape memory (FSMA). These alloys have the ability to change shape under mechanical pressu
FaME38: Helping engineers studying critical materials
Airplane wings or railway rails are examples of mechanical components constantly submitted to stress. They consist of materials (metal alloys) with properties that may change under stress. To understand and improve such materials, it is essential to observe them on a microscopic scale. The ESRF and the ILL make today a step forward into looking deep inside engineering components. Thanks to the use of complementary neutron and synchrotron X-ray beams, these two centres offer a unique tool to measure strains, texture and microstructure of critical components that are submitted to large stresses. Together with seven British academic institutions, these two research organizations have created Fa
ESA highlights space in Europe`s cars
Advanced space technology is being found more down-to-earth uses – even within the cars driven on Europe`s roads. The ESA conference ‘Technology Exchange between Space and Automotive Industry’ is to highlight how spin-offs from space are influencing the evolution of European automobiles, heralding improvements in safety, performance and power. It will take place 6 November at ESOC, Darmstadt in Germany. "Space technology deals with the challenging conditions of launching and space operations," explained Dr. Ulf Merbold, ESA Utilization Promotion Manager. "These extreme environments are drivers for innovative solutions, which can then be applied elsewhere."
Fingerprinting euro coins
Many Europeans are now learning to deal with a new currency. But also cash dispensers and cigarette machines must distinguish clearly between euros, the old currencies and counterfeit money. A miniature computer now checks the coins by means of digital image processing. For users of the new European currency, having adequate safeguards against forgery is a matter of great importance. The paper money incorporates features such as holograms, watermarks, a security thread, and embossed text to guarantee authenticity. The coins have their own distinguishing features: Differently milled edges allow even the blind to recognize the value of each piece. And the elaborate design of the one-euro and t
More Metal Alloys Current Events and Metal Alloys News Articles
 | Phase Transformations in Metals and Alloys, Second Edition by David A. Porter, Kenneth E. Easterling In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and... |
 | The Theory of Transformations in Metals and Alloys (Part I + II), 3rd Edition (v. 1-2) by J.W. Christian This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of... |
| Metals & Alloys in the Unified Numbering System by SAE | |
| Phase Transformations in Metals and Alloys, Third Edition by David A. Porter, Kenneth E. Easterling, Mohamed Sherif Phase Transformations in Metals and Alloys, Third Edition provides a comprehensive overview of specific types of phase transformations, supplemented by practical case studies of engineering alloys. This new edition now addresses computer-aided calculation of phase diagrams, which has undergone major changes in recent years. It also expands treatment of bainite transformation, nucleation, metallic... | |
 | The Electrical Resistivity of Metals and Alloys (Cambridge Solid State Science Series) by Paul L. Rossiter Understanding the origin of electrical properties of alloys is critical to the development of new materials. Dr. Rossiter blends theoretical and experimental results without relying on detailed quantum mechanics. After introducing the basic concepts of atomic and magnetic correlations, he explains their microstructural consequences. Later chapters deal with the effects of such correlations on... |
 | Superconductivity Of Metals And Alloys (Advanced Book Classics) by P. G. De Gennes Drawn from the author's introductory course at the University of Orsay, Superconductivity of Metals and Alloys is intended to explain the basic knowledge of superconductivity for both experimentalists and theoreticians. These notes begin with an elementary discussion of magnetic properties of Type I and Type II superconductors. The microscopic theory is then built up in the Bogolubov language of... |
| Metals Handbook. Volume 2: Properties and Selection : Nonferrous Alloys and Pure Metals by American Society for Metals | |
| The Beginning of the Use of Metals and Alloys These thirty original essays form a landmark contribution to the history of metallurgy: together they present the first systematic survey of the beginning of the use of metals and alloys throughout the world. What distinguishes the book as a whole is the orientation of the writers toward seeing the objects they uncover in human-historical terms, reminding us that at all stages in history and in... | |
 | The Theory of the Properties of Metals and Alloys by Neville F. Mott, H. Jones Quantum methods develop mathematical models: crystal structure, magnetic susceptibility, electrical and optical properties, thermal properties, etc. Unabridged republication of the original (1936)... |
| Surface phenomena in metals and alloys (Adiwes international series in metallurgy and materials) by V. K Semenchenko |
| © 2008 BrightSurf.com |