Science Current Events | Science News | Brightsurf.com
 
Email a Friend Send to a friend
Printer Friendly Print New recipe for self-healing plastic includes dash of food additive

New recipe for self-healing plastic includes dash of food additive

October 16, 2008

CHAMPAIGN, Ill. - Adding a food additive to damaged polymers can help restore them to full strength, say scientists at the University of Illinois who cooked up the novel, self-healing system.

The repair process, in which solvent-filled microcapsules embedded in an epoxy matrix rupture when a crack forms, is a major improvement over the original self-healing process first described in February 2001.




"While our previous solvent worked well for healing, it was also toxic," said Scott White, a professor of aerospace engineering and a researcher at the university's Beckman Institute. "Our new solvent is both non-toxic and less expensive."

During normal use, epoxy-based materials experience stresses that can cause cracking, which can lead to mechanical failure. Autonomic self-healing - a process in which the damage itself triggers the repair mechanism - can retain structural integrity and extend the lifetime of the material.

Designed to mimic the human body's ability to repair wounds, self-healing materials release a healing agent into the crack plane when damaged, and through chemical and physical processes, restore the material's initial fracture properties.

In November 2007, White and collaborators reported the use of chlorobenzene, a common - but toxic - organic solvent, which in epoxy resins achieved a healing efficiency of up to 82 percent.

In their latest work, which combined a non-toxic and Kosher-certified food additive (ethyl phenylactate) and an unreacted epoxy monomer into microcapsules as small as 150 microns in diameter, the researchers achieved a healing efficiency of 100 percent.

"Previously, the microcapsules contained only solvent, which flowed into the crack and allowed some of the unreacted matrix material to become mobile, react and repair the damage," said graduate research assistant Mary Caruso. "By including a tiny amount of unreacted epoxy monomer with the solvent in the microcapsules, we can provide additional chemical reactivity to repair the material."

When the epoxy monomer enters the crack plane, it bonds with material in the matrix to coat the crack and regain structural properties. In tests, the solvent-epoxy monomer combination was able to recover 100 percent of a material's virgin strength after damage had occurred.

"This work helps move self-healing materials from the lab and into everyday applications," said graduate research assistant Benjamin Blaiszik. "We've only begun to scratch the surface of potential applications using encapsulated solvent and epoxy resin."

University of Illinois at Urbana-Champaign



Related Microcapsule Current Events and Microcapsule News Articles
Tiny capsules deliver
A tiny particle syringe composed of polymer layers and nanoparticles may provide drug delivery that targets diseased cells without harming the rest of the body, according to a team of chemical engineers. This delivery system could be robust and flexible enough to deliver a variety of substances.

New polymer coatings prevent corrosion, even when scratched
Imagine tiny cracks in your patio table healing by themselves, or the first small scratch on your new car disappearing by itself. This and more may be possible with self-healing coatings being developed at the University of Illinois.

Carnegie Mellon researchers to develop new drug delivery system
Carnegie Mellon University's Stefan F. Zappe is using adult neural stem cells to develop a new stem cell-based drug delivery therapy that may ultimately help treat a variety of inherited genetic disorders like Hunter syndrome.

New 'self-exploding' microcapsules could take sting out of drug delivery
Belgian chemists have developed "self-exploding" microcapsules that could one day precisely release drugs and vaccines inside the human body weeks or even months after injection.
More Microcapsule Current Events and Microcapsule News Articles
  Microcapsule processing and technology
by Asaji Kondo (Author)



Givenchy SwissCare Firm Profile Intensive Face Firming with Green Tea Microcapsules 50ml/1.7oz

Givenchy SwissCare Firm Profile Intensive Face Firming with Green Tea Microcapsules 50ml/1.7oz
by Givenchy

Firms and hydrates your skin leaving it soft and supple. Suitable for all skin types.

6 each: Fuller Brush Micro Encapsulated Stainless Steel Cleaner (599N)

6 each: Fuller Brush Micro Encapsulated Stainless Steel Cleaner (599N)
by Fuller Brush

Sold as one unit. (1 unit = 6 each.) 22 oz. spray. Cleans, polishes and protects stainless steel surfaces. Microcapsules containing concentrated polishing agents suspended in cleaning gel clean and polish stainless steel surfaces. Helps reduce the appearance of scratches on surfaces . Manufacturer number: 599N. SKU #: 1370485. Country of origin: (TBA). Distributed by Fuller Brush.

6 each: Fuller Brush Micro Multi- Purpose Cleaner (624N)

6 each: Fuller Brush Micro Multi- Purpose Cleaner (624N)
by Fuller Brush

Sold as one unit. (1 unit = 6 each.) 22 oz. Cleans most hard surfaces such as: sealed wood, marble and tile. Not for use on unsealed wood surfaces. Microcapsules containing concentrated polishing agents suspended in cleaning gel provide full strength cleaning power. Refreshing orange scent. Manufacturer number: 624N. SKU #: 1372184. Country of origin: (TBA). Distributed by Fuller Brush.

  Microspheres, Microcapsules and Liposomes: Dendrimers, Assemblies and Nanocomposites v. 5 (Microspheres, microcapsules & liposomes)
by Reza Arshady (Editor)



  Preparation and Characterization of Hollow Microcapsules for Use as Ultrasound Contrast Agents.: An article from: Polymer Engineering and Science
by Padma Narayan (Author), Margaret A. Wheatley (Author)

This digital document is an article from Polymer Engineering and Science, published by Society of Plastics Engineers, Inc. on November 1, 1999. The length of the article is 7084 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

Citation Details
Title: Preparation and Characterization of Hollow Microcapsules for Use as Ultrasound Contrast Agents.
Author: Padma Narayan
Publication: Polymer Engineering and Science (Refereed)
Date: November 1, 1999
Publisher: Society of Plastics Engineers, Inc.
Volume: 39 Issue: 11 Page: 2242

Distributed by Thomson...

Modelling prediction of the microcapsule size of polyelectrolyte [An article from: Chemical Engineering Journal]

Modelling prediction of the microcapsule size of polyelectrolyte [An article from: Chemical Engineering Journal]
by E.P. Herrero (Author), E.M.M. Del Valle (Author), M.A. Galan (Author)

This digital document is a journal article from Chemical Engineering Journal, published by Elsevier in 2006. The article is delivered in HTML format and is available in your Amazon.com Media Library immediately after purchase. You can view it with any web browser.

Description:
In order to have a better understanding of the atomization process for microencapsulation applications the disintegration of polymer liquid jets (sodium alginate) injected into high-velocity gas streams was studied and a mathematical model to predict the microparticle size has been developed. Air-blast atomization of viscous non-Newtonian fluid (alginate solution) was carried out in order to produce microbeads (1-50@mm) based on polyelectrolyte complexes with particle size control and a particle size...

Release Studies on Mesoporous Microcapsules for New Corrosion Protection Systems

Release Studies on Mesoporous Microcapsules for New Corrosion Protection Systems
by Magdalena Walczak (Author)

The present work has been motivated by a particular concept of corrosion protection; however, it addresses the generic field of storage and delivery of functional molecules. After processing of galvanized steel sheets a so-called cut-edge is exposed. Its cathodic protection is mostly insufficient and a solution is sought in the incorporation of functional microcapsules into the metallic coating. In detail, mesoporous silica particles have been studied with respect to compatibility as well as loading and release properties. The development and application of two methods, one based on microscopic and one spectroscopic measurement, allowed the characterization of release kinetics for single particles as well as particle assemblies. Anisotropic diffusion coefficients and surface diffusion...

HPLC Analysis of Iron in Microcapsules

HPLC Analysis of Iron in Microcapsules
by Matthias Reismüller (Author)

Iron deficiency is the most common nutritional deficiency worldwide. An approach to improve the situation is to fortify food with iron. The Austrian Company, GAT Microencapsulation AG has developed a food additive where iron is protected in a microcapsule (diameter 2-4 µm). This technology preserves iron in what is called the iron (II) state, which has high bioavailability and prevents iron from reacting with any other food compounds. The question is, how can the iron content of a product whether it is the raw materials, the microencapsulated food additive or the fortified food be determined in an automated way? The author Matthias Reismüller presents a solution by developing a HPLC method. The use of a complexation agent allows determining iron by UV or DAD detection. Analytical...

Microcapsules and Nanoparticles in Medicine and Pharmacy

Microcapsules and Nanoparticles in Medicine and Pharmacy
by Max Donbrow (Author)

This book provides a comprehensive look at the important advances made in the design and production of microcapsules, microspheres, and nanoparticles. It discusses the diverse aspects and skills that must be mastered to be able to prepare and test products that will work correctly and be clinically acceptable for human or animal use. Chapters have been contributed by a distinguished international interdisciplinary panel specializing in various fields. Topics include important production technologies, characterization of morphologies, biological and chemical behavior of products and polymers, assessment of drug release kinetics, and pharmacokinetics and bioavailability. New clinical directions are surveyed, including chemo-embolization, passive and active targeting of tumors or organs,...

© 2009 BrightSurf.com