heaper materials could be key to low-cost solar cells

February 18, 2009

Availability of solar cell materials could limit large-scale deployment of photovoltaics

Berkeley -- Unconventional solar cell materials that are as abundant but much less costly than silicon and other semiconductors in use today could substantially reduce the cost of solar photovoltaics, according to a new study from the Energy and Resources Group and the Department of Chemistry at the University of California, Berkeley, and the Lawrence Berkeley National Laboratory (LBNL).

These materials, some of which are highly abundant, could expand the potential for solar cells to become a globally significant source of low-carbon energy, the study authors said.

The analysis, which appeared online Feb. 13 in Environmental Science & Technology, examines the two most pressing challenges to large-scale deployment of solar photovoltaics as the world moves toward a carbon neutral future: cost per kilowatt hour and total resource abundance. The UC Berkeley study evaluated 23 promising semiconducting materials and discovered that 12 are abundant enough to meet or exceed annual worldwide energy demand. Of those 12, nine have a significant raw material cost reduction over traditional crystalline silicon, the most widely used photovoltaic material in mass production today.

The work provides a roadmap for research into novel solar cell types precisely when the U. S. Department of Energy and other funders plan to expand their efforts to link new basic research to deployment efforts as part of a national effort to greatly expand the use of clean energy, according to Daniel Kammen, UC Berkeley professor of energy and resources and director of the Renewable and Appropriate Energy Laboratory.

Kammen and colleagues Cyrus Wadia of LBNL and A. Paul Alivisatos of UC Berkeley's Department of Chemistry embarked on an intensive research project to explore the question of whether high-impact materials have been overlooked or underdeveloped during the last several decades of solar cell research.

"The reason we started looking at new materials is because people often assume solar will be the dominant energy source of the future," said Wadia, a post-doctoral researcher who spearheaded the research. "Because the sun is the Earth's most reliable and plentiful resource, solar definitely has that potential, but current solar technology may not get us there in a timeframe that is meaningful, if at all. It's important to be optimistic, but when considering the practicalities of a solar-dominated energy system, we must turn our attention back to basic science research if we are to solve the problem."

The most popular solar materials in use today are silicon and thin films made of CdTe (cadmium telluride) and CIGS (copper indium gallium selenide). While these materials have helped elevate solar to a major player in renewable energy markets, they are still limited by manufacturing challenges. Silicon is expensive to process and mass produce. Furthermore, it has become increasingly difficult to mine enough silicon to meet ever-growing consumer demand.

Thin films, while significantly less costly than silicon and easier to mass produce, would rapidly deplete our natural resources if these technologies were to scale to terawatt hours of annual manufacturing production. A terawatt hour is a billion kilowatt hours.

"We believe in a portfolio of technologies and therefore continue to support the commercial development of all photovoltaic technologies," Kammen said. "Yet, what we've found is that some leading thin films may be difficult to scale as high as global electricity consumption."

"It's not to say that these materials won't play a significant role," Wadia added, "but rather, if our objective is to supply the majority of electricity in this way, we must quickly consider alternative materials that are Earth-abundant, non-toxic and cheap. These are the materials that can get us to our goals more rapidly."

The team identified a large material extraction cost (cents/watt) gap between leading thin film materials and a number of unconventional solar cell candidates, including iron pyrite, copper sulfide and copper oxide. They showed that iron pyrite is several orders of magnitude better than any alternative on important metrics of both cost and abundance. In the report, the team referenced some recent advances in nanoscale science to argue that the modest efficiency losses of unconventional solar cell materials would be offset by the potential for scaling up while saving significantly on materials costs.

Finding an affordable electricity supply is essential for meeting basic human needs, Kammen said, yet 30 percent of the world's population remains without reliable or sufficient electrical energy. Scientific forecasts predict that to meet the world's energy demands by 2050, global carbon emissions would have to grow to levels of irreversible consequences.

"As the U.S. envisions a clean energy future consistent with the vision outlined by President Obama, it is exciting that the range of promising solar cell materials is expanding, ideally just as a national renewable energy strategy takes shape," said Kammen, who is co-director of the Berkeley Institute of the Environment and UC Berkeley's Class of 1935 Distinguished Chair of Energy.

University of California - Berkeley

---

---

	Solar Cells: Materials, Manufacture and Operation by Tom Markvart (Author), Luis Castaner (Author) The capture and use of solar energy has been growing for many years, but only in recent times have advances in design and manufacture allowed us to see the incorporation of solar energy as a significant player in the renewable energy arena. Solar cells are at the heart of any photovoltaic system and in this book the various types are described and their characteristics reviewed. Going beyond materials, design and function, 'Solar Cells' also covers their testing, monitoring and calibration thus providing a comprehensive account of current activity in this important field of research and industry. 'Solar Cells' has been abstracted from the recent 'Practical Handbook of Photovoltaics' by the same editors (ISBN 185617 3909. 2003: Elsevier) ...
	The Physics of Solar Cells (Properties of Semiconductor Materials) by Jenny Nelson (Author) This book provides a comprehensive introduction to the physics of the photovoltaic cell. It is suitable for undergraduates, graduate students, and researchers new to the field. It covers: basic physics of semiconductors in photovoltaic devices; physical models of solar cell operation; characteristics and design of common types of solar cell; and approaches to increasing solar cell efficiency. The text explains the terms and concepts of solar cell device physics and shows the reader how to formulate and solve relevant physical problems. Exercises and worked solutions are included. Contents: Photons In, Electrons Out: Basic Principles of PV; Electrons and Holes in Semiconductors; Generation and Recombination; Junctions; Analysis of the p n Junction; Monocrystalline Solar Cells; Thin Film...
	Practical Photovoltaics: Electricity from Solar Cells by Richard J. Komp (Author), John Perlin (Introduction) Practical Photovoltaics, the now-classic reference on solar electricity, offers a unique combination of technical discussion and practical advice. Physicist, lecturer, and solar-home dweller Richard Komp explains the "how" and the "how-to" of PV, while providing valuable information on the industry, new developments, and the future. The book is a comprehensive guide to the theory and reality of solar electricity, as well as a detailed installation and maintenance manual. A well-illustrated appendix offers step-by-step instructions for constructing your own solar module, a creative approach to demystifying the technology. Presented in a clear, concise, and understandable style, Dr. Komp's contribution to PV literature has been called the "best single reference available," "the easiest and...
	Physics of Solar Cells: From Basic Principles to Advanced Concepts (Physics Textbook) by Peter Würfel (Author) Based on the highly regarded and extremely successful first edition, this thoroughly revised, updated and expanded edition contains the latest knowledge on the mechanisms of solar energy conversion. The textbook describes in detail all aspects of solar cell function, the physics behind every single step, as well as all the issues to be considered when improving solar cells and their efficiency. Requiring no more than standard physics knowledge, the book enables both students and researchers to understand the factors driving conversion efficiency and to apply this knowledge to their own solar cell development. New exercises after each chapter help students to consolidate their freshly acquired knowledge, while the book also serves as a reference for researchers already working in...
	Photovoltaic Design and Installation For Dummies (For Dummies (Math & Science)) by Ryan Mayfield (Author) The fun and easy way to get a grip on photovoltaic design and installationDesigning and installing solar panel systems is a trend that continues to grow. With 'green collar' jobs on the rise and homeowners looking for earth-friendly ways to stretch their dollars and lesson their carbon imprint, understanding photovoltaic design and installation is on the rise.Photovoltaic Design & Installation For Dummies gives you a comprehensive overview of the history, physics, design, installation, and operation of home-scale solar-panel systems. You'll also get an introduction to the foundational mathematic and electrical concepts you need to understand and work with photovoltaic systems.Covers all aspects of home-scale solar-power systemsViable resource for professionals, students, and technical...
	Dye-sensitized Solar Cells by Kuppuswamy Kalyanasundaram (Author) Several forms of thin-film solar cells are being examined as alternatives to silicon-solar cells—one of the most promising technologies is the dye-sensitized solar cell (DSC), with proven efficiencies that approach 11%. This book, which provides a comprehensive look at this promising technology, aims to provide both a graduate level text that brings together the fundamentals of DSC from three perspectives (materials, performance, and mechanistic aspects), as well as to serve as an advanced monograph that summarizes the key advances and lists the technical challenges remaining to be solved.
	How to Build a Solar Panel Power System for less than $150.00 (The Debt Killer) The wonderful world of Photovoltaic’s, otherwise known as solar power, doesn’t have to be restricted to the rich. You can build a simple solar power set-up that can run all the lights in your home, a TV, stereo, computer, or similar electrical device. All you need is 1 solar panel, 1 battery, 110 volt inverter and a set of car jumper cables. All for no more than a Friday night out on the town ($130). You can now run your laptop, Blackberry, Ipod, Iphone or any other electronic, wherever you are. Take them camping or to the beach, you’ll never be far from a plug again. This is a simple system to run some basic electronics that anyone can put together.
	Build Your Own Solar Panel: Generate Electricity from the Sun. by Phillip Hurley (Author) Whether you’re trying to get off the grid, or you just like to experiment, Build Your Own Solar Panel has all the information you need to build your own photovoltaic panel to generate electricity from the sun. Now available for the first time in print, this revised and expanded edition has easy-to-follow directions, and over 150 detailed photos and illustrations. Lists of materials, tools, and suppliers of PV cells are included. Every-day tools are all that you need to complete these projects. Build Your Own Solar Panel will show you how to: Design and build PV panels, Customize panel output, Make tab and bus ribbon, Solder cell connections, Wire a photovoltaic panel, Purchase solar cells, Test and rate PV cells, Repair damaged solar cells, Work with broken cells, Encapsulate solar...
	Solar Cell Device Physics, Second Edition by Stephen Fonash (Author) There has been an enormous infusion of new ideas in the field of solar cells over the last 15 years; discourse on energy transfer has gotten much richer, and nanostructures and nanomaterials have revolutionized the possibilities for new technological developments. However, solar energy cannot become ubiquitous in the world's power markets unless it can become economically competitive with legacy generation methods such as fossil fuels. The new edition of Dr. Stephen Fonash's definitive text points the way toward greater efficiency and cheaper production by adding coverage of cutting-edge topics in plasmonics, multi-exiton generation processes, nanostructures and nanomaterials such as quantum dots. The book's new structure improves readability by shifting many detailed equations to...
	Solar Electricity Handbook - 2011 Edition: A Simple Practical Guide to Solar Energy - Designing and Installing Photovoltaic Solar Electric Systems by Michael Boxwell (Author) The Solar Electricity Handbook is a simple, practical guide to using electric solar panels and designing and installing photovoltaic PV systems.   Significantly updated for 2011, the latest edition assumes no previous knowledge of solar electric systems. The book explains how solar panels work and how they can be used. It explains the advantages of solar energy and the drawbacks that you need to take into account when designing a solar power system. As well as explaining the underlying principles, it provides a step-by-step guide so that you can successfully design and install a photovoltaic solar system from scratch.   Internet Linked Accompanying the book is one of the most comprehensive solar resource websites in the world. It contains powerful...