Slimmer, Stickier Nanorods Give Boost to 3-D Computer Chips

March 18, 2009

Researchers at Rensselaer Polytechnic Institute have developed a new technique for growing slimmer copper nanorods, a key step for advancing integrated 3-D chip technology.

These thinner copper nanorods fuse together, or anneal, at about 300 degrees Celsius. This relatively low annealing temperature could make the nanorods ideal for use in heat-sensitive nanoelectronics, particularly for "gluing" together the stacked components of 3-D computer chips.

"When fabricating and assembling 3-D chips, and when bonding the silicon wafers together, you want as low a temperature as possible," said Pei-I Wang, research associate at Rensselaer's Center for Integrated Electronics. "Slimmer nanorods, by virtue of their smaller diameters, require less heat to anneal. These lower temperatures won't damage or degrade the delicate semiconductors. The end result is a less expensive, more reliable device."

Experimental 3-D computer chips are comprised of several layers of stacked components. Wang said these layers can be coated with thin nanorods, and then heated up to 300 degrees Celsius. Around that temperature, the thin nanorods anneal, turn into a continuous thin film, and fuse the layers together. This study was the first demonstration of slimmer nanorods enabling wafer bonding, according to Wang.

Fundamental research concerning the slimmer nanorods was led by Toh-Ming Lu, the R.P. Baker Distinguished Professor of Physics at Rensselaer. Results of the study were recently published in the journal Nanotechnology.

Research into wafer bonding and incorporating the slimmer nanorods into 3-D integrated computer chips was led by James Jian-Qiang Lu, associate professor in the Department of Electrical, Computer, and Systems Engineering (ECSE) and the Center for Integrated Electronics (CIE) at Rensselaer. Results of the study were recently published in the journal Electrochemical and Solid-State Letters.

The slimmer copper nanorods were formed by periodically interrupting the growth process. The vapor-deposition process was occasionally halted, and the fledgling nanorods were exposed to oxygen. This resulted in a forest of nanorods with diameters between 10 nanometers and 50 nanometers - far smaller than the typical 100-nanometer diameter copper nanorods grown conventionally without interruption.

Vast forests, or arrays, of copper nanorods are produced by vapor deposition at an oblique angle. In a conventional setting, with an uninterrupted stream of copper atoms deposited in a vacuum onto a substrate, the deposition angle naturally results in taller, thicker nanorods.

Periodically interrupting the deposition, and exposing the copper nanorods to ambient air, however, leads to oxygen being absorbed into the surface of the nanorods. During subsequent depositions, this oxidized copper helps to prevent the vaporized copper atoms from migrating away from the very tips of the nanorods. This ensures the nanorods grow taller, without necessarily growing in diameter. The more growth interruptions, the thinner the resulting nanorods, Wang said.

Wang and the research group have filed for a patent for this new technology. The patent is currently pending.

Along with Wang and Toh-Ming Lu, co-authors of the Nanotechnology paper include Gwo Ching Wang, professor and chair of the Department of Physics, Applied Physics, and Astronomy at Rensselaer; Rensselaer physics graduate student Thomas C. Parker; and Tansel Karabacak, assistant professor in the Department of Applied Science at the University of Arkansas at Little Rock.

Co-authors of the Electrochemical and Solid-State Letters paper include Pei-I Wang, Toh-Ming Lu, James Jian-Qiang Lu, Parker, Karabacak, along with Rensselaer research associate Sang Hwui Lee, and Rensselaer Center for Integrated Electronics Senior Applications Engineer Michael D. Frey.

Funding for the research reported in the Electrochemical and Solid-State Letters was provided by the New York State Foundation for Science, Technology and Innovation (NYSTAR) through the Interconnect Focus Center-New York.

Visit Toh-Ming Lu's Web site for more information on advanced thin-film research, or James Jian-Qiang Lu's Web site for more information on research into 3-D integrated semiconductors.

Rensselaer Polytechnic Institute

Nano-Antimicrobials: Progress and Prospects
by Nicola Cioffi (Editor), Mahendra Rai (Editor)

There is a high demand for antimicrobials for the treatment of new and emerging microbial diseases. In particular, microbes developing multidrug resistance have created a pressing need to search for a new generation of antimicrobial agents, which are effective, safe and can be used for the cure of multidrug-resistant microbial infections. Nano-antimicrobials offer effective solutions for these challenges; the details of these new technologies are presented here. The book includes chapters by an international team of experts. Chemical, physical, electrochemical, photochemical and mechanical methods of synthesis are covered. Moreover, biological synthesis using microbes, an option that is both eco-friendly and economically viable, is presented. The antimicrobial potential of...

Metallic Nanomaterials (Nanomaterials for Life Sciences (VCH))
by Challa S. S. R. Kumar (Series Editor)

The available books/book series in the market do not provide any information on application of material-specific Nanomaterials in life sciences. Such a book series is essential as it helps a person with materials background to be quickly aware of life science applications of specific nanomaterial and similarly a person with life science background to know material-specific utility in life sciences.

Nanostructures and Nanomaterials: Synthesis, Properties, and Applications (2nd Edition) (World Scientific Series in Nanoscience and Nanotechnology)
by Guozhong Cao (Author), Ying Wang (Author)

This is the 2nd edition of the original "Nanostructures and Nanomaterials" written by Guozhong Cao and published by Imperial College Press in 2004. This important book focuses not only on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as...

Fabrication of Nanostructures by Plasma Electrolysis
by Mahmood Aliofkhazraei (Author), Alireza Sabour Rouhaghdam (Author)

In this handbook and ready reference, the authors introduce the concept of plasma electrolysis, explaining how the coatings are characterized and discussing their mechanical and corrosion properties. They then go on to look at specific industrial applications of this powerful and low-cost method, including aerospace, the biomaterials industry as well as in the oil and gas industry.

Nanoelectronics: Nanowires, Molecular Electronics, and Nanodevices
by Krzysztof Iniewski (Author)

The latest advances in nanoelectronics This definitive volume addresses the state of the art in nanoelectronics, covering nanowires, molecular electronics, and nanodevices. Written by global experts in the field, Nanoelectronics discusses cutting-edge techniques and emerging materials, such as carbon nanotubes and quantum dots. This pioneering work offers a comprehensive survey of nanofabrication options for use in next-generation technologies. Nanoelectronics covers: Electrical properties of metallic nanowires Electromigration defect nucleation in damascene copper interconnect lines Carbon nanotube interconnects in CMOS integrated circuits Printed organic electronics One-dimensional nanostructure-enabled chemical sensing Cross-section fabrication and...

Annual Review Of Nano Research (Annual Review of Nano Research)
by Guozhong Cao (Author), Guozhong Cao (Editor), C. Jeffrey Brinker (Editor)

The second volume of the Annual Review of Nano Research focuses mainly on nanofabrication, nanomaterials and nanostructures, and energy application of nanomaterials. All of the review chapters are contributed by well-published scientists and bring the most recent advancements in selected topics to the readers. This review volume will perfectly serve dual purposes: either as an excellent introduction to scientists whose expertise lies in different fields but who are interested in learning about nanotechnology, or as a quick reference for experts active in the field of nanotechnology and nanoscience. Contents: Optical and Dynamic Properties of Undoped and Doped Semiconductor Nanostructures (J Z Zhang & C D Grant); Nanostructure Presented Chemiluminescence and Electrochemiluminescence...

Handbook of Wafer Bonding
by Peter Ramm (Editor), James Jian-Qiang Lu (Editor), Maaike M. V. Taklo (Editor)

The focus behind this book on wafer bonding is the fast paced changes in the research and development in three-dimensional (3D) integration, temporary bonding and micro-electro-mechanical systems (MEMS) with new functional layers. Written by authors and edited by a team from microsystems companies and industry-near research organizations, this handbook and reference presents dependable, first-hand information on bonding technologies.Part I sorts the wafer bonding technologies into four categories – Adhesive and Anodic Bonding; Direct Wafer Bonding; Metal Bonding; and Hybrid Metal/Dielectric Bonding. Part II summarizes the key wafer bonding applications developed recently, that is, 3D integration, MEMS, and temporary bonding, to give readers a taste of the significant applications of...

Low-Dimensional Systems: Theory, Preparation, and Some Applications (Nato Science Series II: (closed))
by Luis M. Liz-Marzán (Editor), Michael Giersig (Editor)

The term low-dimensional systems, which is used in the title of this volume, refers to those systems which contain at least one dimension that is intermediate between those characteristic of atoms/molecules and those of the bulk material. Depending on how many dimensions lay within this range, one generally speaks of quantum wells, quantum wires, and quantum dots. At such an intermediate state, some properties of low-dimensional systems are very different from those of their molecular and bulk counterparts. These properties generally include optical, electronic, and magnetic properties, and all these are partially covered in this book. The book's main thrust is a discussion of the actual state of the art in the broad area of nanotechnology. The initial focus is on the innovative...

Nanoparticle Assemblies and Superstructures
by Nicholas A. Kotov (Editor)

Cubes, triangular prisms, nano-acorn, nano-centipedes, nanoshells, nano-whiskers. . . . Now that we can create nanoparticles in a wide variety of shapes and morphologies, comes the next challenge: finding ways to organize this collection of particles into larger and more complex systems. Nanoparticle Assemblies and Superstructures, edited by pioneer of nanoparticle self-organization Nicholas A. Kotov, employs three critical questions to provide a framework of open-ended inquiry: What are the methods of organization of nanocolloids in more complex structures? What kind of structures do we need? What are the new properties appearing in nanocolloid superstructures? Pulling together a collection of contributors unmatched in both their expertise and enthusiasm, Kotov presents...

Theoretical and Experimental Sonochemistry Involving Inorganic Systems
by Pankaj (Editor), Muthupandian Ashokkumar (Editor)

Despite the fact that chemical applications of ultrasound are now widely acknowledged, a detailed presentation of inorganic systems covering nano-particles, catalysis, aqueous chemistry of metallic solutions and their redox characteristics, both from a theoretical and experimental perspective has eluded researchers of this field. Theoretical and Experimental Sonochemistry Involving Inorganic Systems fills this gap and presents a concise and thorough review of this fascinating area of Sonochemistry in a single volume.