 |
|
Canadian research team reports major breakthrough in lithium battery technology
May 19, 2009An NSERC-funded lab at the University Of Waterloo has laid the groundwork for a lithium battery that can store and deliver more than three times the power of conventional lithium ion batteries.
The research team of professor Linda Nazar, graduate student David Xiulei Ji and postdoctoral fellow Kyu Tae Lee are one of the first to demonstrate robust electrochemical performance for a lithium-sulphur battery. The finding is reported today in the on-line issue of Nature Materials.
The prospect of lithium-sulphur batteries has tantalized chemists for two decades, and not just because successfully combining the two chemistries delivers much higher energy densities. Sulphur is cheaper than many other materials currently used in lithium batteries. It has always showed great promise as the ideal partner for a safe, low cost, long lasting rechargeable battery, exactly the kind of battery needed for energy storage and transportation in a low carbon emission energy economy.
"The difficult challenge was always the cathode, the part of the battery that stores and releases electrons in the charge and recharge cycles," said Dr. Nazar. "To enable a reversible electrochemical reaction at high current rates, the electrically-active sulphur needs to remain in the most intimate contact with a conductor, such as carbon."
The Canadian research team leap-frogged the performance of other carbon-sulphur combinations by tackling the contact issue at the nanoscale level. Although they say the same approach could be used with other materials, for their proof of concept study they chose a member of a highly structured and porous carbon family called mesoporous carbon. At the nanoscale level, this type of carbon has a very uniform pore diameter and pore volume.
Using a nanocasting method, the team assembled a structure of 6.5 nanometre thick carbon rods separated by empty three to four nanometre wide channels. Carbon microfibres spanning the empty channels kept the voids open and prevented collapse of the architecture.
Filling the tiny voids proved simple. Sulphur was heated and melted. Once in contact with the carbon, it was drawn or imbibed into the channels by capillary forces, where it solidified and shrunk to form sulphur nanofibres. Scanning electron microscope sections revealed that all the spaces were uniformly filled with sulphur, exposing an enormous surface area of the active element to carbon and driving the exceptional test results of the new battery.
"This composite material can supply up to nearly 80 percent of the theoretical capacity of sulphur, which is three times the energy density of lithium transition metal oxide cathodes, at reasonable rates with good cycling stability," said Dr. Nazar.
What is more, the researchers say, the high capacity of the carbon to incorporate active material opens the door for similar "imbibed" composites that could have applications in many areas of materials science.
The research team continues to study the material to work out remaining challenges and refine the cathode's architecture and performance.
Dr. Nazar said a patent has been filed, and she is reviewing options for commercialization and practical applications.
Natural Sciences and Engineering Research Council
"The difficult challenge was always the cathode, the part of the battery that stores and releases electrons in the charge and recharge cycles," said Dr. Nazar. "To enable a reversible electrochemical reaction at high current rates, the electrically-active sulphur needs to remain in the most intimate contact with a conductor, such as carbon."
The Canadian research team leap-frogged the performance of other carbon-sulphur combinations by tackling the contact issue at the nanoscale level. Although they say the same approach could be used with other materials, for their proof of concept study they chose a member of a highly structured and porous carbon family called mesoporous carbon. At the nanoscale level, this type of carbon has a very uniform pore diameter and pore volume.
Using a nanocasting method, the team assembled a structure of 6.5 nanometre thick carbon rods separated by empty three to four nanometre wide channels. Carbon microfibres spanning the empty channels kept the voids open and prevented collapse of the architecture.
Filling the tiny voids proved simple. Sulphur was heated and melted. Once in contact with the carbon, it was drawn or imbibed into the channels by capillary forces, where it solidified and shrunk to form sulphur nanofibres. Scanning electron microscope sections revealed that all the spaces were uniformly filled with sulphur, exposing an enormous surface area of the active element to carbon and driving the exceptional test results of the new battery.
"This composite material can supply up to nearly 80 percent of the theoretical capacity of sulphur, which is three times the energy density of lithium transition metal oxide cathodes, at reasonable rates with good cycling stability," said Dr. Nazar.
What is more, the researchers say, the high capacity of the carbon to incorporate active material opens the door for similar "imbibed" composites that could have applications in many areas of materials science.
The research team continues to study the material to work out remaining challenges and refine the cathode's architecture and performance.
Dr. Nazar said a patent has been filed, and she is reviewing options for commercialization and practical applications.
Natural Sciences and Engineering Research Council
Bringing solar power to the masses
On a 104-degree Friday in July when sunlight bathed The University of Arizona campus, doctoral student Dio Placencia sat before a noisy vacuum chamber in the Chemical Sciences Building trying to advance the renewable energy revolution.
New imaging method lets scientists 'see' cell molecules more clearly
Scientists have always wanted to take a closer look at biological systems and materials. From the magnifying glass to the electron microscope, they have developed ever-increasingly sophisticated imaging devices.
New battery technology helps stimulate nerves
With the help of new silicon-based compounds, scientists - and patients - are getting a significant new charge out of the tiny lithium batteries used in implantable devices to help treat nervous system and other disorders.
More Lithium Ion Batteries Current Events and Lithium Ion Batteries News Articles
 |
4 RCR123A 3.0V 900mAh Rechargeable Li-Ion Protected Batteries with a Smart Charger by Tenergy Charger Features * Worldwide usage. Auto AC power adjust from 100-240V. * Smart, build-in microprocessor automatically switch off when batteries are fully charged. * Safe, build-in IC provides various protection, Thermal protection, Overcharge protection, Short-circuit protection, mechanical. and electrical protection against reversal polarity, and auto defective battery identification. * Convenient, 12V car cigarette lighter plug for on the road charging. * Compact (2.5 x 4 x 1 inch), Light weight (5 oz only), include charger and all accessories. * Charge 1 to 2 RCR123A from 1.5 hours to 3 hours. Peak voltage of 3.0V Li-Ion will be 3.60V after fully charged. RCR123A Features * Rechargeable CR123A Li-Ion Batteries with 3.0V working voltage and 900mAh capacity. * Fully protected... |
 |
Casio NP-20 Lithium Ion Rechargeable Battery for the Casio Digital Camera by Casio Inc. Casio is one of the leading consumer electronics companies in the world. Since its establishment in 1957, Casio has been active in the development of electronic calculators, timepieces, musical instruments, LCD TVs, pagers and other communications devices. Casio's corporate activities are guided by the motto: "Creativity and Contribution". Casio, the unexpected extra!The NP-20 replacement battery pack for EXILIM is great as a back up battery! |
 |
Makita BL1830 18-Volt LXT Lithium-Ion Battery by Makita 18V, 3.0AH, Lithium-ion Battery, Built In Memory Chip Memorizes The Usage History & Communicates With The Charger, Less Weight Lithium-ion Battery Weighs 40% Less Than Ni-MH Or Nickel Cadmium, Anytime Charge Lithium-ion Batteries Have No Memory Effect & Can Be Charged At Any Time, Charging Technology Controls Current, Voltage & Temperature To Maximize Battery Life. |
 |
Canon BP511A 1390mAh Lithium Ion Battery Pack for Select Digital Cameras and Camcorders by Canon Cameras US powers select Canon digital cameras and camcorders * rated at 7.4V, 1390mAh * 1-9/16"W x 2-3/16"H x 7/8"D * weight: 2.9 oz. * warranty: 30 days |
 |
Canon BP-819 Lithium Ion Battery Pack for HF10 and HF100 Camcorders by Canon Video Take advantage of uninterrupted power with the BP-819 power pack. Times vary depending on camcorder. |
 |
Milwaukee 48-11-1830 V18 18-Volt 3.0 Amp Hour Lithium-Ion Slide Style Battery by Milwaukee The Milwaukee 48-11-1830 v18 18-volt 3.0 amp hour lithium-ion slide style battery provides up to 50-percent longer run-time than 18-volt NiCd batteries. It has superior cold weather operation and allows near full run-time performance down to -4 degrees Fahrenheit. It is a 14.4-volt nicd battery weight with 18-volt power. It features v-technology batteries that provide fade-free power until the end of discharge. It comes with a 5-year/2000-charge warranty and is compatible with all Milwaukee 18- to 28-volt batteries. |
 |
Canon NB-7L Lithium-Ion Battery Pack for Canon G10 Digital Cameras by Canon Cameras US The NB-7L Lithium-Ion Battery Pack for Canon G10 Digital Cameras more models. Compatible with original manufacturer equipments and chargers. Absolutely no memory effect so that you can charge battery at anytime. |
 |
Lithium-Ion Batteries: Science and Technologies by Masaki Yoshio (Editor), Ralph J. Brodd (Editor), Akiya Kozawa (Editor) This book is a compilation of up-to-date information relative to Li-Ion technology. It provides the reader with a single source covering all important aspects of Li-Ion battery operations. It fills the gap between the old original Li-Ion technology and present state of the technology that has developed into a high state of practice. The book is designed to provide a single source for an up-to-date description of the technology associated with the Li-Ion battery industry. It will be useful to researchers interested in energy conversion for the direct conversion of chemical energy into electrical energy as a textbook. University people will find a comprehensive description of the state-of-the-art of the Li-Ion system. |
 |
HP EV089AA 12 Cell Lithium Ion Battery for HP Pavilion DV6000 DV2000 by Hewlett Packard Maximize your battery life for more games, videos, music, and photo viewing without having to plug in your AC adapter. An additional 12-cell battery1 doubles your notebook's capacity compared with the power you get from a standard 6-cell battery. Compatibility: HP Pavilion dv2000, dv6000; Compaq Presario V3000, V6000 series notebook PCs. |
 |
Sony CR2032 Lithium Ion Battery by Sony Sony 3 Volt Lithium Batter provide an excellent combination of high energy and continuous voltage supply. These batteries provide long shelf life for back up energy purposes together with ideal temperature resistance and superior storage capacity. Sony's lithium coin batteries are guaranteed to provide optimal performance throughout the life of the battery. They are ideal for cameras, wristwatches, electronic agendas and games, and calculators. |
| © 2009 BrightSurf.com |