 |
|
NIST discovers how strain at grain boundaries suppresses high-temperature superconductivity
June 18, 2009Researchers at the National Institute of Standards and Technology (NIST) have discovered that a reduction in mechanical strain at the boundaries of crystal grains can significantly improve the performance of high-temperature superconductors (HTS). Their results* could lead to lower cost and significantly improved performance of superconductors in a wide variety of applications, such as power transmission, power grid reliability and advanced physics research.
One of the main challenges in developing long-length, high-quality HTS wires is to mitigate the effect of granularity on wire performance because grain boundaries are prone to block current flow. Dislocations-defects in the crystalline structure-that grow in number with increasing grain-boundary angle strongly reduce the superconducting crosssection of the grain boundary.
Switching to thin-film designs has led to great improvements in grain alignment and significantly improved performance in, for instance, yttrium-barium-copper-oxide (YBCO) coated conductors. But even in these highly aligned superconductor films grain boundaries still limit their performance. The effect of dislocations can further be mitigated by chemical doping of the grain boundaries-for instance by replacing some of the yttrium atoms with calcium-but it has been difficult to apply this technique to long wire lengths.
Although it is well known that dislocations cause part of the grain boundary crosssection to become non-superconducting, the effect of strain-which extends from the dislocations into the remaining superconducting bridges over the grain boundary-was previously unknown. NIST's Danko van der Laan and his collaborators have found that this strain plays a key role in reducing current flow over grain boundaries in YBCO. Furthermore, when the strain was removed by applying compression to the grain boundaries, the superconducting properties improved dramatically.
The new understanding of the effects of strain on current flow in thin-film superconductors could significantly advance the development of these materials for practical applications and could lower their cost. Some of the most promising uses are in more efficient electrical transmission lines, which already have been successfully demonstrated by U.S. power companies, and increased electric power grid reliability. NIST has research programs in both these areas. Improved HTS thin-film conductors could also enable more powerful high-field particle accelerators and advanced cancer treatment facilities.
###
* D.C. van der Laan, T.J. Haugen and P.N. Barnes. Effect of compressive uni-axial strain on grain boundary critical current density in YBa2Cu3O7-d superconducting films, Physical Review Letters Accepted papers, June 9, 2009.
National Institute of Standards and Technology (NIST)
Although it is well known that dislocations cause part of the grain boundary crosssection to become non-superconducting, the effect of strain-which extends from the dislocations into the remaining superconducting bridges over the grain boundary-was previously unknown. NIST's Danko van der Laan and his collaborators have found that this strain plays a key role in reducing current flow over grain boundaries in YBCO. Furthermore, when the strain was removed by applying compression to the grain boundaries, the superconducting properties improved dramatically.
The new understanding of the effects of strain on current flow in thin-film superconductors could significantly advance the development of these materials for practical applications and could lower their cost. Some of the most promising uses are in more efficient electrical transmission lines, which already have been successfully demonstrated by U.S. power companies, and increased electric power grid reliability. NIST has research programs in both these areas. Improved HTS thin-film conductors could also enable more powerful high-field particle accelerators and advanced cancer treatment facilities.
###
* D.C. van der Laan, T.J. Haugen and P.N. Barnes. Effect of compressive uni-axial strain on grain boundary critical current density in YBa2Cu3O7-d superconducting films, Physical Review Letters Accepted papers, June 9, 2009.
National Institute of Standards and Technology (NIST)
High-temperature Superconductors Current Events and High-temperature Superconductors News RSSQuantum gas microscope offers glimpse of quirky ultracold atoms
Physicists at Harvard University have created a quantum gas microscope that can be used to observe single atoms at temperatures so low the particles follow the rules of quantum mechanics, behaving in bizarre ways.
Atoms don't dance the 'bose nova'
Hanns-Christoph Naegerl's research group has investigated how ultracold quantum gases behave in lower spatial dimensions. They successfully realized an exotic state, where, due to the laws of quantum mechanics, atoms align along a one-dimensional structure.
Superconductivity: Which one of these is not like the other?
Superconductivity appears to rely on very different mechanisms in two varieties of iron-based superconductors.
Magnetism governs properties of iron-based superconductors
Though a year has passed since the discovery of a new family of high-temperature superconductors, a viable explanation for the iron-based materials' unusual properties remains elusive. But a team of scientists working at the National Institute of Standards and Technology (NIST) may be close to the answer.
Physicists offer new theory for iron compounds
An international team of physicists from the United States and China this week offered a new theory to both explain and predict the complex quantum behavior of a new class of high-temperature superconductors.
Electron pairs precede high-temperature superconductivity
Like astronomers tweaking images to gain a more detailed glimpse of distant stars, physicists at the U.S. Department of Energy's (DOE) Brookhaven National Laboratory have found ways to sharpen images of the energy spectra in high-temperature superconductors - materials that carry electrical current effortlessly when cooled below a certain temperature.
Galaxy Zoo -- an Internet superstar
Since Galaxy Zoo's launch in July 2007, some 150,000 members of the public, inspired by the opportunity to be the first to see and classify a galaxy, have helped professional astronomers via this on-line mass-participation project to carry out real scientific research.
Scientists reveal effects of quantum 'traffic jam' in high-temperature superconductors
Scientists at the U.S. Department of Energy's Brookhaven National Laboratory, in collaboration with colleagues at Cornell University, Tokyo University, the University of California, Berkeley, and the University of Colorado, have uncovered the first experimental evidence for why the transition temperature of high-temperature superconductors -- the temperature at which these materials carry electrical current with no resistance -- cannot simply be elevated by increasing the electrons' binding energy.
New JILA technique reveals hidden properties of ultracold atomic gases
Physicists at JILA, a joint institute of the National Institute of Standards and Technology (NIST) and the University of Colorado at Boulder, have demonstrated a powerful new technique that reveals hidden properties of ultracold atomic gases.
UBC physicists develop 'impossible' technique to study and develop superconductors
A team of University of British Columbia researchers has developed a technique that controls the number of electrons on the surface of high-temperature superconductors, a procedure considered impossible for the past two decades.
More High-temperature Superconductors Current Events and High-temperature Superconductors News Articles
 |
High-Temperature Superconductivity: An Introduction by Gerald Burns (Author) Here is a concise, tutorial overview of the exciting new field of high-temperature superconductivity. This authoritative textbook focuses on topics, experimental results, and theoretical issues that are likely to have lasting value and are readily understandable to upper-level undergraduates and others new to the field. Written primarily from an experimental point of view, the book reviews conventional superconductors and then presents the structure, normal state and superconducting properties, and applications of the new cuprate superconductors. An insightful analysis of critical currents in thin films and wires is included. The book will provide an excellent supplementary text for students taking their first solid state physics course. In addition, all those with a basic knowledge of... |
|
Chemistry of High-Temperature Superconductors (Acs Symposium Series) (Vol 1) by David L. Nelson (Author), M. Stanley M. Whittingham (Author), Thomas F. George (Editor) | |
 |
High-Temperature Superconductors (Springer Series in Materials Science) by A. K. Saxena (Author) The present book aims at describing the phenomenon of superconductivity and high-temperature superconductors discovered by Bednorz and Muller in 1986. The book covers the superconductivity phenomenon, structure of high-Tc superconductors, critical currents, synthesis routes for high Tc materials, superconductivity in cuprates, the proximity effect and SQUIDs, theories of superconductivity and applications of superconductors. |
|
Chemistry of High-Temperature Superconductors II (Acs Symposium Series) by David L. Nelson (Editor), Thomas F. George (Editor) Brand new research! The sequel to last year's runaway bestseller in this hot new field focuses on the rapid progress that has been made in the following areas of physical chemistry: theory, new materials, surfaces and interfaces, and processing. More than 100 scientists from major research groups have contributed to this timely volume, on this second anniversary of the discovery of these remarkable materials. This research was presented at the ACS National Meeting in Los Angeles in September 1988. | |
 |
Bismuth-based High-temperature Superconductors (Applied Physics Series , No 6) by Hiroshi Maeda (Editor) Filling an important gap in the field, this comprehensive reference provides detailed coverage of the ongoing investigations on bismuth-based high-temperature cuprate superconductors--integrating scattered research activities and literature from 70 leading scientists throughout the world. |
|
Applications of High Temperature Superconductors to Electric Power Equipment by Swarn S. Kalsi (Author) | |
|
Physical Properties of High Temperature Superconductors II (v. 2) by Donald M. Ginsberg (Author) | |
|
Physical Properties of High Temperature Superconductors I (Series on Progress in High Temperature Superconductivity) (v. 6) by Donald M. Ginsberg (Editor) | |
|
Physical Properties of High Temperature Superconductors IV (Vol 4) by Donald M. Ginsberg (Author) This volume contains two chapters of direct interest for applications: The magnetic vortex states and transformations and the effects of c-axis coupling on the transport properties. In addition, the isotope effect is reviewed, since reliable data on ultra-pure samples are now available. The lattice vibrations (phonons) have been explored extensively by inelastic neutron scattering and infrared absorption and these types of data are reviewed as well. The interesting properties of the superconducting doped fullerenes are described; some of their most fundamental properties are shared by the superconducting cuprates. This book with its subject index, like the earlier three volumes in this series, will be found useful both by people entering the field and by workers who are already... | |
|
Physical Properties of High Temperature Superconductors III (v. 3) by Donald M. Ginsberg (Editor) This volume brings the reader up to date on transport phenomena, including electrical and thermal conductivity and infrared properties. In addition, electron tunnelling and the characteristics and applications of films are discussed; the preparation of the necessaru samples has proceeeded, and a sizeable body of reproducible data has become available. Pressure effects are also presented; considerable progress has been made in relating them to the crystallographic and electronic structure of high temperature superconductors. The preparation and charcterization of bulk samples is also reviewed. |
| © 2009 BrightSurf.com |