 |
|
Bringing solar power to the masses
August 06, 2009On a 104-degree Friday in July when sunlight bathed The University of Arizona campus, doctoral student Dio Placencia sat before a noisy vacuum chamber in the Chemical Sciences Building trying to advance the renewable energy revolution.
As a member of UA professor Neal R. Armstrong's research group, Placencia conducts research aimed at creating a thin, flexible organic solar cell that could power a tent or keep a car charged between trips to work and back home again.
He's passionate about renewable energy and says it's a waste that so little solar has been incorporated into society. "I have a little flat panel that I walk around with," Placencia said. "I usually put that on my backpack, and I charge my cell phone when I'm walking to school."
The sun is clean and free. "Here it is," he said. "Why not use it?"
Across the University, professors, researchers, students and others involved in policy planning and economic analysis are working to make that question moot. In a region noted for abundant sunlight, they are chipping away at problems like how to employ solar at the utility-generating plant level, how to harness it to charge the newly indispensable products of the day - cell phones, MP3 players, laptops - what to do at night and when clouds halt the energy giveaway from the sky.
The research proceeds in labs amid state-of-the-art equipment funded by multimillion-dollar federal grants. It's the product of students' hunches and long careers spent unlocking the mysteries of science. Along the way, students are being immersed in a nascent industry that many hope will be the economic engine of the next decade.
"Looking at renewable energy is a perfect place to emphasize that we don't know where the next breakthrough is going to be," said Leslie P. Tolbert, UA vice president for research, graduate studies and economic development. "Somewhere in a lab someplace, there's somebody figuring out a whole new way to capture sunlight. In fact, there are many people doing that. And even they are depending on knowing that there is, behind them, a cadre of basic science researchers producing new information that will feed their thoughts."
Armstrong, a professor of chemistry and optical sciences at the UA, occasionally teaches freshman chemistry. He decided one day near the end of the semester to try to make the material even more relevant. "I said to myself, well, lithium ion batteries in my cell phone, in my iPod," - his daughter had given him one - "I wonder how much coal we burn to charge those guys up at the end of the day. Because that's one of the big drivers for portable power, to get all this stuff off the grid." After making some very conservative calculations, he arrived at an answer, which he shared with the class: "You burn about a quarter of a pound of coal per charge of your lithium ion battery, and you generate about half a pound of CO2 per charge, per battery, per day .... The room got really quiet."
The next time, he intends to calculate how much coal is burned per Twitter tweet.
"It really is chilling," Armstrong said. "You start doing the math and thinking about the number of consumer electronic devices that you and I have added to our lives in the last decade that I charge up typically once every night - my laptop computer and my cell phone. Then you start thinking about, 'What if I do buy an electric car, and I come home at night and plug that sucker in,' and you do the same thing. We'll shut this grid down in no time."
In April, the U.S. Department of Energy announced it was funding Armstrong's Center for Interface Science as one of 46 Energy Frontier Research Centers. The mission of these centers, which will receive $2 million to $5 million a year for five years, is "to address current fundamental scientific roadblocks to clean energy and energy security," according to the DOE.
Ever since Armstrong was a graduate student during the first Arab oil embargo in 1973, he's experienced a succession of government distress calls over energy. One such emergency led him to discover the work of Heinz Gerischer and Frank Willig in Germany. They had figured out how to adsorb dye molecules to the surface of oxides and split water with light from the sun. "I thought, 'That's it. That's what I'm going to do my career on.'"
He moved to the UA in 1978, attracted by a program in photo-thermal solar energy conversion. In the 1980s, with gas cheap and plentiful again, solar went back on the back burner.
The next call came about four years ago. "DOE was beginning to sense that the tides were about to shift again, big-time," Armstrong said. "And they were really concerned that they didn't know what to do - how to present this to Congress in a way that would lead to new funding and which would have a rationale associated with it so that by the middle of this century we had someplace to go."
Armstrong realized it was time to come back to the problem that he wanted to work on 30 years before. "This time, we were really well-equipped," he said. "We've learned how to image molecules at the molecular level, we've learned how to measure energies of incredibly thin films, we've learned how to make devices, we've collaborated with physicists and material sciences and that sort of thing, we've done a lot of interesting other stuff and I suddenly realized I could bring it all back together here."
In his office, he displays a sample of his work: a 1-inch square of glass on which is deposited a thin film of indium tin oxide, a conducting transparent oxide commonly found in display technologies like computer screens. On top of that is a thin film of organic dyes. The last layer is an aluminum electrode.
"You'd have a roll of plastic with these cells laid out on it," he explained. "The idea is for you to go to Target or something like that and buy this roll of plastic and roll it out. It's got two wires connected to it, and you plug in your battery or your laptop and charge it up."
"The grand total in terms of the thickness is about 400 nanometers, which is one ten-thousandth the thickness of a human hair. And yet, shine a light on it and you get electricity out of it. Now we'd like it to be a bit thicker. We have to keep them thin in order to get all of the electrical charge out of the device. But if you think about this as a sandwich structure, we've made this incredibly thin sandwich and then each of the layers in contact with each other have to be just right in terms of the chemical composition, the orientation of the molecules, how well they adhere to each of the underlying surfaces. And if I go in and change just one molecule layer, the composition - that's at the level of 1 nanometer in thickness - I can take a good device and turn it into a bad device; I can take a bad device and turn it into a good device. That's the kind of level of control that we need. And we don't fully understand it."
But the equipment available now - optical microscopes capable of imaging individual molecules and revealing their electrical properties and spatial orientation - are helping his team understand. His goal is to figure out how to have the molecules arrange themselves - every time - in a way to produce lots of electricity. "They have to all line up like little soldiers," he said.
"We have to give you a technology that is going to look like an ink, like a blue ink, that you can spray down on one of these surfaces and the molecules at the nanometer level are going to say, 'OK, we're going to get organized this way,' and in doing so, when I put that top electrode on and shine a light, I'll get lots and lots of electricity out of there," Armstrong said.
A high vacuum photoelectron spectrometer allows them to build each molecular layer, moving it within the vacuum to study it, and then continue with another molecular layer. Other tools, like a silicon microtip, which looks like a tiny phonograph needle, can be positioned to +/- 0.01 nanometers. "Well inside the diameter of a molecule," he said. Bouncing a laser off the back of the tip yields an image. Passing current through the tip, they can map the electrical properties of molecules. All this can help them build a template to create the ideal array of the molecule assemblies.
Erin Ratcliff joined the team as a postdoctoral electrochemist with a doctorate from Iowa State. "My background wasn't in solar cells at all," she said. "I had to come here and had to learn everything, where grad students get it from Day One at the UA."
She spoke of the business school curve, resembling a hockey stick, when progress begins to accelerate rapidly. "We're right at the magic moment when the hockey stick starts to take off, when you go from flat to hockey stick. We're right there. It's exciting to read the literature and hope that, yes, we will take off. It will be exciting to look back and say 'I was there for that.'"
University of Arizona
The sun is clean and free. "Here it is," he said. "Why not use it?"
Across the University, professors, researchers, students and others involved in policy planning and economic analysis are working to make that question moot. In a region noted for abundant sunlight, they are chipping away at problems like how to employ solar at the utility-generating plant level, how to harness it to charge the newly indispensable products of the day - cell phones, MP3 players, laptops - what to do at night and when clouds halt the energy giveaway from the sky.
The research proceeds in labs amid state-of-the-art equipment funded by multimillion-dollar federal grants. It's the product of students' hunches and long careers spent unlocking the mysteries of science. Along the way, students are being immersed in a nascent industry that many hope will be the economic engine of the next decade.
"Looking at renewable energy is a perfect place to emphasize that we don't know where the next breakthrough is going to be," said Leslie P. Tolbert, UA vice president for research, graduate studies and economic development. "Somewhere in a lab someplace, there's somebody figuring out a whole new way to capture sunlight. In fact, there are many people doing that. And even they are depending on knowing that there is, behind them, a cadre of basic science researchers producing new information that will feed their thoughts."
Armstrong, a professor of chemistry and optical sciences at the UA, occasionally teaches freshman chemistry. He decided one day near the end of the semester to try to make the material even more relevant. "I said to myself, well, lithium ion batteries in my cell phone, in my iPod," - his daughter had given him one - "I wonder how much coal we burn to charge those guys up at the end of the day. Because that's one of the big drivers for portable power, to get all this stuff off the grid." After making some very conservative calculations, he arrived at an answer, which he shared with the class: "You burn about a quarter of a pound of coal per charge of your lithium ion battery, and you generate about half a pound of CO2 per charge, per battery, per day .... The room got really quiet."
The next time, he intends to calculate how much coal is burned per Twitter tweet.
"It really is chilling," Armstrong said. "You start doing the math and thinking about the number of consumer electronic devices that you and I have added to our lives in the last decade that I charge up typically once every night - my laptop computer and my cell phone. Then you start thinking about, 'What if I do buy an electric car, and I come home at night and plug that sucker in,' and you do the same thing. We'll shut this grid down in no time."
In April, the U.S. Department of Energy announced it was funding Armstrong's Center for Interface Science as one of 46 Energy Frontier Research Centers. The mission of these centers, which will receive $2 million to $5 million a year for five years, is "to address current fundamental scientific roadblocks to clean energy and energy security," according to the DOE.
Ever since Armstrong was a graduate student during the first Arab oil embargo in 1973, he's experienced a succession of government distress calls over energy. One such emergency led him to discover the work of Heinz Gerischer and Frank Willig in Germany. They had figured out how to adsorb dye molecules to the surface of oxides and split water with light from the sun. "I thought, 'That's it. That's what I'm going to do my career on.'"
He moved to the UA in 1978, attracted by a program in photo-thermal solar energy conversion. In the 1980s, with gas cheap and plentiful again, solar went back on the back burner.
The next call came about four years ago. "DOE was beginning to sense that the tides were about to shift again, big-time," Armstrong said. "And they were really concerned that they didn't know what to do - how to present this to Congress in a way that would lead to new funding and which would have a rationale associated with it so that by the middle of this century we had someplace to go."
Armstrong realized it was time to come back to the problem that he wanted to work on 30 years before. "This time, we were really well-equipped," he said. "We've learned how to image molecules at the molecular level, we've learned how to measure energies of incredibly thin films, we've learned how to make devices, we've collaborated with physicists and material sciences and that sort of thing, we've done a lot of interesting other stuff and I suddenly realized I could bring it all back together here."
In his office, he displays a sample of his work: a 1-inch square of glass on which is deposited a thin film of indium tin oxide, a conducting transparent oxide commonly found in display technologies like computer screens. On top of that is a thin film of organic dyes. The last layer is an aluminum electrode.
"You'd have a roll of plastic with these cells laid out on it," he explained. "The idea is for you to go to Target or something like that and buy this roll of plastic and roll it out. It's got two wires connected to it, and you plug in your battery or your laptop and charge it up."
"The grand total in terms of the thickness is about 400 nanometers, which is one ten-thousandth the thickness of a human hair. And yet, shine a light on it and you get electricity out of it. Now we'd like it to be a bit thicker. We have to keep them thin in order to get all of the electrical charge out of the device. But if you think about this as a sandwich structure, we've made this incredibly thin sandwich and then each of the layers in contact with each other have to be just right in terms of the chemical composition, the orientation of the molecules, how well they adhere to each of the underlying surfaces. And if I go in and change just one molecule layer, the composition - that's at the level of 1 nanometer in thickness - I can take a good device and turn it into a bad device; I can take a bad device and turn it into a good device. That's the kind of level of control that we need. And we don't fully understand it."
But the equipment available now - optical microscopes capable of imaging individual molecules and revealing their electrical properties and spatial orientation - are helping his team understand. His goal is to figure out how to have the molecules arrange themselves - every time - in a way to produce lots of electricity. "They have to all line up like little soldiers," he said.
"We have to give you a technology that is going to look like an ink, like a blue ink, that you can spray down on one of these surfaces and the molecules at the nanometer level are going to say, 'OK, we're going to get organized this way,' and in doing so, when I put that top electrode on and shine a light, I'll get lots and lots of electricity out of there," Armstrong said.
A high vacuum photoelectron spectrometer allows them to build each molecular layer, moving it within the vacuum to study it, and then continue with another molecular layer. Other tools, like a silicon microtip, which looks like a tiny phonograph needle, can be positioned to +/- 0.01 nanometers. "Well inside the diameter of a molecule," he said. Bouncing a laser off the back of the tip yields an image. Passing current through the tip, they can map the electrical properties of molecules. All this can help them build a template to create the ideal array of the molecule assemblies.
Erin Ratcliff joined the team as a postdoctoral electrochemist with a doctorate from Iowa State. "My background wasn't in solar cells at all," she said. "I had to come here and had to learn everything, where grad students get it from Day One at the UA."
She spoke of the business school curve, resembling a hockey stick, when progress begins to accelerate rapidly. "We're right at the magic moment when the hockey stick starts to take off, when you go from flat to hockey stick. We're right there. It's exciting to read the literature and hope that, yes, we will take off. It will be exciting to look back and say 'I was there for that.'"
University of Arizona
Solar Power Current Events and Solar Power News RSSChemists describe solar energy progress and challenges, including the 'artificial leaf'
Scientists are making progress toward development of an "artificial leaf" that mimics a real leaf's chemical magic with photosynthesis - but instead converts sunlight and water into a liquid fuel such as methanol for cars and trucks.
Shifting the world to 100 percent clean, renewable energy as early as 2030 -- here are the numbers
Most of the technology needed to shift the world from fossil fuel to clean, renewable energy already exists. Implementing that technology requires overcoming obstacles in planning and politics, but doing so could result in a 30 percent decrease in global power demand.
Report examines hidden costs of energy production and use
A new report from the National Research Council examines and, when possible, estimates "hidden" costs of energy production and use -- such as the damage air pollution imposes on human health -- that are not reflected in market prices of coal, oil, other energy sources, or the electricity and gasoline produced from them.
Smaller isn't always better: Catalyst simulations could lower fuel cell cost
Imagine a car that runs on hydrogen from solar power and produces water instead of carbon emissions. While vehicles like this won't be on the market anytime soon, University of Wisconsin-Madison researchers are making incremental but important strides in the fuel cell technology that could make clean cars a reality.
Electrical circuit runs entirely off power in trees
You've heard about flower power. What about tree power? It turns out that it's there, in small but measurable quantities. There's enough power in trees for University of Washington researchers to run an electronic circuit.
Plastics that convert light to electricity could have a big impact
Researchers the world over are striving to develop organic solar cells that can be produced easily and inexpensively as thin films that could be widely used to generate electricity.
NIST scientists study how to stack the deck for organic solar power
A new class of economically viable solar power cells-cheap, flexible and easy to make-has come a step closer to reality as a result of recent work* at the National Institute of Standards and Technology (NIST), where scientists have deepened their understanding of the complex organic films at the heart of the devices.
Composites for energy
Advanced composite materials are playing a vital role in improved design and reduced operating costs for renewable energy technologies.
Flexible Solar Strips Light Up Campus Bus Shelter
There won't be anymore waiting in the dark at this campus bus shelter. New flexible solar cell technology developed by a group of engineering researchers at McMaster University has been installed to power lighting for night-time transit users.
Nanocups brim with potential
Researchers at Rice University have created a metamaterial that could light the way toward high-powered optics, ultra-efficient solar cells and even cloaking devices.
More Solar Power Current Events and Solar Power News Articles
 |
Solar Power Your Home For Dummies (For Dummies (Home & Garden)) by Rik DeGunther (Author) Solar Power Your Home For Dummies is the bestselling consumer guide to solar power in North America. Updates for the second edition ensure that this title continues to provide readers with accurate and timely information on a subject that is constantly evolving. Solar Power Your Home For Dummies, 2nd Edition, includes updates on changes to federal, state, and local regulations, laws, and tax incentives that seek to make solar-power adoption more feasible. Expanded coverage of the technology that underpins full-scale solar-power systems for the home have been added in direct response to consumer demand. With this information, readers are better positioned to weigh the pros and cons of embarking on what can be an expensive undertaking. New small and mid-sized solar... |
 |
The Solar Electricity Handbook 2009: A Simple, Practical Guide to Using Electric Solar Panels and Designing and Installing Photovoltaic Solar PV Systems by Michael Boxwell (Author) The Solar Electricity Handbook is a practical and straightforward guide to using electric solar panels. Assuming no previous knowledge of solar panels, the book explains how solar panels work, how they can be used and explains the steps you need to take to successfully design and install a solar electric system from scratch using photovoltaic solar panels. Accompanying this book is a solar resource website containing lots of useful information, lists of suppliers and on-line solar energy calculators that will simplify the cost analysis and design processes. Why buy the Solar Electricity Handbook? * The Handbook is a simple, practical guide to using electric photovoltaic panels. |
 |
Xantrex Technologies 852-2071 Xpower AC/DC Powerpack Solar With 400 Watt Inverter, Two AC Outlets, USB Port, And Digital Display by Xantrex Technologies The XPower Powerpack Solar is the first portable power pack that incorporates solar power in a compact, portable power source. It's completely self-renewing, which means the detachable 5-watt solar panel has the ability to recharge the power pack's 10 amp-hour battery.The 5-watt solar panel captures stores and converts the sun's renewable energy, replenishes the XPower Powerpack Solar's battery, and extends the runtime of many devices by up to 25 percent. |
 |
The Complete Idiot's Guide to Solar Power for your Home, 2nd Edition by Dan Ramsey (Author), David Hughes (Author) The perfect source for solar power—fully illustrated. Solar Power (photovoltaics) is now a one-billion-dollar industry, and it’s poised to grow rapidly in the near future as more pressure is placed on limited fossil fuel resources and as advances in solar technology drive down the costs of residential solar systems. This book helps readers understand the basics of solar power and other renewable energy sources, explore whether solar power makes sense for them, what their options are, and what’s involved with installing various on and off-grid systems. —Fully illustrated —Covers every conceivable solar-power topic and concern, including updated information on the increasing number of state rebate and incentive programs |
 |
Sunforce 50044 60-Watt Solar Charging Kit by Sunforce The Sunforce 50044 60 Watt Solar Charging Kit gives you another reason to love the sun -- it'll help keep your batteries charged. This kit is excellent for cabins, remote power, back-up power, and 12-volt battery charging. The kit includes a PVC mounting frame, 7 Amp charge controller, 200-watt inverter, and wiring/connection cables. And with the built-in blocking diode technology, this charger kit is designed to protect against battery discharge at night. You can also use this kit to maintain the charge on any 12-volt battery for clean, silent operation of various electronics, such as deer feeders and landscaping pumps. The 50044 features a built-in ultra-bright blue LED charging indicator, and is a great choice for automobiles, recreational vehicles (RV), tractors, all terrain vehicles... |
 |
Got Sun? Go Solar: Get Free Renewable Energy to Power Your Grid-Tied Home by Rex A. Ewing; Doug Pratt (Author) A straight-talking book tells grid-connected homeowners how to use free energy from the sun and wind to reduce or even eliminate their electric bills, and what to expect from this independent, thoughtful lifestyle. Whether you live in the sun-soaked Southwest, or windy North Dakota, alternative energy has come of age with affordable modern technology. Now with rebates and incentives from most states, installing a home system is an economically-attractive and environmentally-responsible option. Chapters include: - Why invest in alternative energy for your home? - Is it legal and safe? - How solar electricity really works - Batteries or not? - Sizing a system to fit your home and your needs - Got Wind? - What does it cost? - Does your state offer rebates or incentives? -... |
 |
Solar 2 in 1 Folding Panel, Power supply, AA and AAA battery charger. by Everestep This is a Folding Pocket Solar Charger. It comes with a battery charging unit for charging 4 AA or 4 AAA rechargeable batteries at a time. The power cord has a pre wired multiplug connector. It will fit common power supply ports on your electronic devises. It has a blocking diode to prevent reverse flow at night. The rugid housing unfolds to expose the solar panel to the sun. It also comes with a belt clip that will alow you to clip it to your backpack, purse or belt. The omni plug fits the Nokia Cell phone pictured, but it may not be suitable for all cell phones. Rechargable batteries and cell phone pictured are not included. What you get: 6 volt, 200 mA folding solar panel. AA, AAA battery charger unit (batteries not included) Power cord with Omni plug Belt clip Wire junction (to... |
 |
12 Volt Solar Power: A Do it Yourself Guide (Simple Living) by Michel Daniek (Author) |
 |
Thames & Kosmos Physics Solar Workshop by Thames & Kosmos Physics is about motion and if you like to move it, you can move lots of things with this cool 320-pc. set. Build a variety of vehicles and machines that demonstrate how gears can convert and transform power for different needs. Includes a 64-page booklet that provide detailed instruction on a variety of experiments and projects. Ages 8+. |
 |
Solar Power (Energy for Today) by Tea Benduhn (Author) |
| © 2009 BrightSurf.com |