 |
|
Nuclear fusion research key to advancing computer chips
August 19, 2009Researchers are adapting the same methods used in fusion-energy research to create extremely thin plasma beams for a new class of "nanolithography" required to make future computer chips.
Current technology uses ultraviolet light to create the fine features in computer chips in a process called photolithography, which involves projecting the image of a mask onto a light-sensitive material, then chemically etching the resulting pattern.
New nanolithography will be needed to continue advances in computer technology and to extend Moore's law, an unofficial rule stating that the number of transistors on integrated circuits, or chips, doubles about every 18 months.
"We can't make devices much smaller using conventional lithography, so we have to find ways of creating beams having more narrow wavelengths," said Ahmed Hassanein, the Paul L. Wattelet Professor of Nuclear Engineering and head of Purdue's School of Nuclear Engineering.
The new plasma-based lithography under development generates "extreme ultraviolet" light having a wavelength of 13.5 nanometers, less than one-tenth the size of current lithography, Hassanein said.
Nuclear engineers and scientists at Purdue and the U.S. Department of Energy's Argonne National Laboratory are working to improve the efficiency of two techniques for producing the plasma: One approach uses a laser and the other "discharge-produced" method uses an electric current.
"In either case, only about 1 to 2 percent of the energy spent is converted into plasma," Hassanein said. "That conversion efficiency means you'd need greater than 100 kilowatts of power for this lithography, which poses all sorts of engineering problems. We are involved in optimizing conversion efficiency - reducing the energy requirements - and solving various design problems for the next-generation lithography."
Findings are detailed in a research paper scheduled to appear in the October-December 2009 issue of the Journal of Micro/Nanolithography, MEMS, and MOEMS. The paper was written by Hassanein, senior research scientist Valeryi Sizyuk, computer analyst Tatyana Sizyuk, and research assistant professor Sivanandan Harilal, all in the School of Nuclear Engineering.
Critical to the research is a computer simulation, called HEIGHTS - for high-energy interaction with general heterogeneous target systems - developed by Hassanein's team. Computations for a single HEIGHTS simulation using Argonne supercomputers can take several months to finish, said Hassanein, a former Argonne senior scientist who led work there to develop HEIGHTS.
The laser method creates plasma by heating xenon, tin or lithium. The plasma produces high-energy packets of light, called photons, of extreme ultraviolet light.
Plasma is a partially ionized gaslike material that conducts electricity. Because of this electrical conductivity, researchers are able to use magnetic fields to shape and control plasmas, forming beams, filaments and other structures. In experimental fusion reactors, magnetic fields are used to keep plasma-based nuclear fuel from touching the metal walls of the containment vessel, enabling the plasma to be heated to the extreme temperatures required to maintain fusion reactions.
HEIGHTS simulates the entire process of the plasma evolution: the laser interacting with the target, and the target evaporating, ionizing and turning into a plasma. The simulation also shows what happens when the magnetic forces "pinch" the plasma cloud into a smaller diameter spot needed to generate the photons.
Findings in the paper detail the laser-produced plasma beams, showing that simulations match data from laboratory experiments recently built at Purdue, Hassanein said.
"It was very exciting to see this match because it means we are on the right track," Hassanein said. "The computer simulations tell us how to optimize the entire system and where to go next with the experiments to verify that."
One design challenge stems from the fact that lenses absorb the photons that make up light, meaning they cannot be used to focus the beam. Instead, mirrors are used in the design. However, plasma condenses on the mirrors, reducing their reflectivity and limiting the efficiency of the process.
"We are trying to help find innovative ways of producing these photons, optimizing the production and mitigating the effects of the plasma on the mirrors," Hassanein said. "So we are trying to improve the entire system."
The simulation tool combines computations in plasma physics, radiation transport, atomic physics, plasma-material interactions and magnetohydrodynamics, or what happens when a target is heated, melts and turns into a plasma.
The work is based at the Center for Materials Under Extreme Environments at Purdue. Previous support came from Intel Corp and Sematech, an industry consortium formed to advance computer technology.
Purdue University
"We can't make devices much smaller using conventional lithography, so we have to find ways of creating beams having more narrow wavelengths," said Ahmed Hassanein, the Paul L. Wattelet Professor of Nuclear Engineering and head of Purdue's School of Nuclear Engineering.
The new plasma-based lithography under development generates "extreme ultraviolet" light having a wavelength of 13.5 nanometers, less than one-tenth the size of current lithography, Hassanein said.
Nuclear engineers and scientists at Purdue and the U.S. Department of Energy's Argonne National Laboratory are working to improve the efficiency of two techniques for producing the plasma: One approach uses a laser and the other "discharge-produced" method uses an electric current.
"In either case, only about 1 to 2 percent of the energy spent is converted into plasma," Hassanein said. "That conversion efficiency means you'd need greater than 100 kilowatts of power for this lithography, which poses all sorts of engineering problems. We are involved in optimizing conversion efficiency - reducing the energy requirements - and solving various design problems for the next-generation lithography."
Findings are detailed in a research paper scheduled to appear in the October-December 2009 issue of the Journal of Micro/Nanolithography, MEMS, and MOEMS. The paper was written by Hassanein, senior research scientist Valeryi Sizyuk, computer analyst Tatyana Sizyuk, and research assistant professor Sivanandan Harilal, all in the School of Nuclear Engineering.
Critical to the research is a computer simulation, called HEIGHTS - for high-energy interaction with general heterogeneous target systems - developed by Hassanein's team. Computations for a single HEIGHTS simulation using Argonne supercomputers can take several months to finish, said Hassanein, a former Argonne senior scientist who led work there to develop HEIGHTS.
The laser method creates plasma by heating xenon, tin or lithium. The plasma produces high-energy packets of light, called photons, of extreme ultraviolet light.
Plasma is a partially ionized gaslike material that conducts electricity. Because of this electrical conductivity, researchers are able to use magnetic fields to shape and control plasmas, forming beams, filaments and other structures. In experimental fusion reactors, magnetic fields are used to keep plasma-based nuclear fuel from touching the metal walls of the containment vessel, enabling the plasma to be heated to the extreme temperatures required to maintain fusion reactions.
HEIGHTS simulates the entire process of the plasma evolution: the laser interacting with the target, and the target evaporating, ionizing and turning into a plasma. The simulation also shows what happens when the magnetic forces "pinch" the plasma cloud into a smaller diameter spot needed to generate the photons.
Findings in the paper detail the laser-produced plasma beams, showing that simulations match data from laboratory experiments recently built at Purdue, Hassanein said.
"It was very exciting to see this match because it means we are on the right track," Hassanein said. "The computer simulations tell us how to optimize the entire system and where to go next with the experiments to verify that."
One design challenge stems from the fact that lenses absorb the photons that make up light, meaning they cannot be used to focus the beam. Instead, mirrors are used in the design. However, plasma condenses on the mirrors, reducing their reflectivity and limiting the efficiency of the process.
"We are trying to help find innovative ways of producing these photons, optimizing the production and mitigating the effects of the plasma on the mirrors," Hassanein said. "So we are trying to improve the entire system."
The simulation tool combines computations in plasma physics, radiation transport, atomic physics, plasma-material interactions and magnetohydrodynamics, or what happens when a target is heated, melts and turns into a plasma.
The work is based at the Center for Materials Under Extreme Environments at Purdue. Previous support came from Intel Corp and Sematech, an industry consortium formed to advance computer technology.
Purdue University
Nuclear Fusion Current Events and Nuclear Fusion News RSSHigh-performance plasmas may make reliable, efficient fusion power a reality
In the quest to produce nuclear fusion energy, researchers from the DIII-D National Fusion Facility have recently confirmed long-standing theoretical predictions that performance, efficiency and reliability are simultaneously obtained in tokamaks, the leading magnetic confinement fusion device, operating at their performance limits.
New research shows water present across the moon's surface
It turns out the moon is a lot wetter than we ever thought. When Apollo astronauts returned from the moon 40 years ago, they brought back souvenirs in the form of moon rocks to be used for scientific analysis, and one of the chief questions was whether there was water to be found in the lunar rocks and soils.
Magnetic Fields Play Larger Role in Star Formation than Previously Thought
he simple picture of star formation calls for giant clouds of gas and dust to collapse inward due to gravity, growing denser and hotter until igniting nuclear fusion. In reality, forces other than gravity also influence the birth of stars. New research shows that cosmic magnetic fields play a more important role in star formation than previously thought.
University of Nevada, Reno researcher uses 100,000 degree heat to study plasma
Using one of the greatest sources of radiation energy created by man, University of Nevada, Reno researcher and faculty member Roberto Mancini is studying ultra-high temperature and non-equilibrium plasmas to mimic what happens to matter in accretion disks around black holes.
Birth of a star predicted
The astrophysicist João Alves, director of the Calar Alto Observatory in Almeria, and his colleague Andreas Bürkert, from the German observatory in the University of Munich, believe that "the inevitable future of the starless cloud Barnard 68" is to collapse and give rise to a new star, according to an article which has been published recently in The Astrophysical Journal.
Star crust 10 billion times stronger than steel, IU physicist finds
Research by a theoretical physicist at Indiana University shows that the crusts of neutron stars are 10 billion times stronger than steel or any other of the earth's strongest metal alloys.
Turbulence May Promote the Birth of Massive Stars
On long, dark winter nights, the constellation of Orion the Hunter dominates the sky. Within the Hunter's sword, the Orion Nebula swaddles a cluster of newborn stars called the Trapezium. These stars are young but powerful, each one shining with the brilliance of 100,000 Suns. They are also massive, containing 15 to 30 times as much material as the Sun.
Huge pressures that melt diamond on planet Neptune determined by Sandia researchers
The enormous pressures needed to melt diamond to slush and then to a completely liquid state have been determined ten times more accurately by Sandia National Laboratories researchers than ever before.
Nuclear fusion-fission hybrid could contribute to carbon-free energy future
Physicists at The University of Texas at Austin have designed a new system that, when fully developed, would use fusion to eliminate most of the transuranic waste produced by nuclear power plants.
Mystery of missing hydrogen
Something vital is missing in the far distant reaches of the Universe: hydrogen - the raw material for stars, planets and possible life.
More Nuclear Fusion Current Events and Nuclear Fusion News Articles
 |
Principles of Fusion Energy: An Introduction to Fusion Energy for Students of Science and Engineering by A. A. Harms (Author), K. F. Schoepf (Author), G. H. Miley (Author), D. R. Kingdon (Author) This textbook accommodates the two divergent developmental paths which have become solidly established in the field of fusion energy: the process of sequential tokamak development toward a prototype and the need for a more fundamental and integrative research approach before costly design choices are made. Emphasis is placed on the development of physically coherent and mathematically clear characterizations of the scientific and technological foundations of fusion energy which are specifically suitable for a first course on the subject. Of interest, therefore, are selected aspects of nuclear physics, electromagnetics, plasma physics, reaction dynamics, materials science, and engineering systems, all brought together to form an integrated perspective on nuclear fusion and its... |
 |
Sun in a Bottle: The Strange History of Fusion and the Science of Wishful Thinking by Charles Seife (Author) The author of Zero looks at the messy history of the struggle to harness fusion energy . When weapons builders detonated the first hydrogen bomb in 1952, they tapped into the vastest source of energy in our solar system--the very same phenomenon that makes the sun shine. Nuclear fusion was a virtually unlimited source of power that became the center of a tragic and comic quest that has left scores of scientists battered and disgraced. For the past half-century, governments and research teams have tried to bottle the sun with lasers, magnets, sound waves, particle beams, and chunks of meta. (The latest venture, a giant, multi-billion-dollar, international fusion project called ITER, is just now getting underway.) Again and again, they have failed, disgracing generations of... |
|
Live at the Zinc Bar by Richie Goods and Nuclear Fusion | |
 |
Nuclear Fusion Mat Zo (Primary Contributor) |
|
He Jubian Yu Dengliziti Wuli= Nuclear Fusion and Plasma by China Intl Book Trading Corp | |
 |
Garbage-Nuclear Garbage Sports Performance Drink, 14servings Citrus Fusion by Garbage Individual packets. Hardcore anabolic pre-workout reactor. Stage3 Nuclear Technology: The foundation of Nuclear Garbage is Stage3 Nuclear Technology. This exclusive science breakthrough makes Nuclear Garbage significantly more powerful and advanced than any other pre-training product in existence. Nuclear-G Stage 1: Within minutes, of drinking Nuclear Garbage, you'll feel the neurological surge that prepares your system for insane physical exertion. Your blood is pumping, your pupils are dilated, you're hyper-alert and ready to attack the weights with a ferocity like you've never experienced before. The gym is now your battleground. Nuclear-G Stage 2: Time for extreme exertion. A bioenergetics reaction is triggered supplying your muscles with everything needed to conquer the most brutal... |
 |
Fusion: The Energy of the Universe (Complementary Science) by Garry M McCracken (Author), Peter Stott (Author) Unraveling the role of fusion in the universe has taken almost a century since Einstein's proof of the equivalence of energy and matter in 1905. The discovery that fusion reactions are responsible for the building of the light elements in the "Big Bang" and the subsequent development of the heavier elements in the stars and in exploding supernovae is one of the field's most exciting successes. In this engaging book, McCracken and Stott reexamine these discoveries in astrophysics and discuss the possibility that fusion reactions are not only our sun's source of power, but may also be induced for our use on earth. * Details the initial discovery of nuclear fusion, all related research, and today's concern over future energy supply *... |
 |
1956 General Dynamics Nuclear Fission Solar Energy Atomic Fusion Power Print Ad by AdsPast.com An original vintage magazine ad print from the year published. Print ads make unique gift items that can be framed as artwork. Shipped flat un-framed in plastic sleeve with backing board. |
 |
Operation Upshot/Knothole Nuclear Testing Program on DVD - Operation Upshot/Knothole Fission and Fusion Atomic Weapon Testing Operation Upshot-Knothole - 1953 - 35 minutes - Color This operation conducted at the Nevada Test Site consisted of 11 atmospheric tests. There were three airdrops, seven tower tests, and one airburst. Conducted between March 17 and June 4, 1953, this operation involved the testing of new theories, using both fission and fusion devices. A new and revolutionary method of producing deliverable thermonuclear weapons was successfully tested. Approximately 21,000 Department of Defense military and civilian personnel participated in Operation Upshot-Knothole as part of the Desert Rock V exercise. Unfortunately, Operation Upshot-Knothole, particularly the HARRY test, drew a great deal of criticism as resultant fallout levels produced increased offsite radiation exposures. The tests... |
 |
Nuclear Fusion by Keishiro Niu (Author), K. Sugiura (Foreword) Nuclear Fusion describes the state and ultimate goals of nuclear fusion research. The book concentrates on the energy problem in the near future, the role of nuclear fusion reactions for a solution of the energy problem, the requirements for releasing fusion energy and the methods likely to lead to fusion reactions. The book is organised into four sections. In turn these cover the fundamentals of nuclear fusion, methods of magnetic confinement, methods of innertial confinement and the fusion reactor itself. The book has a strong theoretical content, covering those areas of plasma physics which are necessary for an understanding of the confinement problem. This book was first published in Japanese. This edition in English has been thoroughly revised by Keishiro Niu. |
| © 2009 BrightSurf.com |