 |
|
LEGO toy helps researchers learn what happens on nanoscale
August 26, 2009Johns Hopkins engineers are using a popular children's toy to visualize the behavior of particles, cells and molecules in environments too small to see with the naked eye. These researchers are arranging little LEGO pieces shaped like pegs to re-create microscopic activity taking place inside lab-on-a-chip devices at a scale they can more easily observe.
These lab-on-a-chip devices, also known as microfluidic arrays, are commonly used to sort tiny samples by size, shape or composition, but the minuscule forces at work at such a small magnitude are difficult to measure. To solve this small problem, the Johns Hopkins engineers decided to think big.
Led by Joelle Frechette and German Drazer, both assistant professors of chemical and biomolecular engineering in the university's Whiting School of Engineering, the team used beads just a few millimeters in diameter, an aquarium filled with goopy glycerol and the LEGO pieces arranged on a LEGO board to unlock mysteries occurring at the micro- or nanoscale level. Their observations could offer clues on how to improve the design and fabrication of lab-on-a-chip technology. Their study concerning this technique was published in the Aug. 14 issue of Physical Review Letters.
The idea for this project comes from the concept of "dimensional analysis," in which a process is studied at a different size and time scale while keeping the governing principles the same.
"Microfluidic arrays are like miniature chemical plants," Frechette says. "One of the key components of these devices is the ability to separate one type of constituent from another. We investigated a microfluidic separation method that we suspected would remain the same when you scale it up from micrometers or nanometers to something as large as the size of billiard balls."
With this goal in mind, Frechette and Drazer constructed an array using cylindrical LEGO pegs stacked two high and arranged in rows and columns on a LEGO board to create a lattice of obstacles. The board was attached to a Plexiglas sheet to improve its stiffness and pressed up against one wall of a Plexiglas tank filled with glycerol. Stainless steel balls of three different sizes, as well as plastic balls, were manually released from the top of the array; their paths to the bottom were tracked and timed with a camera.
The entire setup, Drazer said, cost a few hundred dollars and could easily be replicated as a science fair experiment.
Graduate students Manuel Balvin and Tara Iracki, and undergraduate Eunkyung Sohn, all from the Department of Chemical and Biomolecular Engineering, performed multiple trials using each type of bead. They progressively rotated the board, increasing the relative angle between gravity and the columns of the array (that is, altering the forcing angle). In doing so, they saw that the large particles did not move through the array in a diffuse or random manner as their small counterparts usually did in a microfluidic array. Instead, their paths were deterministic, meaning that they could be predicted with precision, Drazer said.
The researchers also noticed that the path followed by the balls was periodic once the balls were in motion and coincided with the direction of the lattice. As the forcing angle increased, some of the balls tended to shift over one, two, three or as many as four pegs before continuing their vertical fall.
"Our experiment shows that if you know one single parameter-a measure of the asymmetry in the motion of a particle around a single obstacle-you can predict the path that particles will follow in a microfluidic array at any forcing angle, simply by doing geometry." Drazer said.
The fact that the balls moved in the same direction inside the array for different forcing angles is referred to as phase locking. If the array were to be scaled down to micro- or nanosize, the researchers said they would expect these phenomena to still be present and even increase depending on the factors such as the unavoidable irregularities of particle size or surface roughness.
"There are forces present between a particle and an obstacle when they get really close to each other which are present whether the system is at the micro- or nanoscale or as large as the LEGO board," Frechette said. "In this separation method, the periodic arrangement of the obstacles allows the small effect of these forces to accumulate, and amplify, which we suspect is the mechanism for particle separation."
This principle could be applied to the design of micro- or nanofluidic arrays, she added, so that they could be fabricated to "sort particles that had a different roughness, different charge or different size. They should follow a different path in an array and could be collected separately."
Phase locking is likely to become less important, Drazer cautioned, as the number of particles in solution becomes more concentrated. "Next," he said, "we have to look at how concentrated your suspension can be before this principle is destroyed by particle-particle interactions."
Johns Hopkins University
The idea for this project comes from the concept of "dimensional analysis," in which a process is studied at a different size and time scale while keeping the governing principles the same.
"Microfluidic arrays are like miniature chemical plants," Frechette says. "One of the key components of these devices is the ability to separate one type of constituent from another. We investigated a microfluidic separation method that we suspected would remain the same when you scale it up from micrometers or nanometers to something as large as the size of billiard balls."
With this goal in mind, Frechette and Drazer constructed an array using cylindrical LEGO pegs stacked two high and arranged in rows and columns on a LEGO board to create a lattice of obstacles. The board was attached to a Plexiglas sheet to improve its stiffness and pressed up against one wall of a Plexiglas tank filled with glycerol. Stainless steel balls of three different sizes, as well as plastic balls, were manually released from the top of the array; their paths to the bottom were tracked and timed with a camera.
The entire setup, Drazer said, cost a few hundred dollars and could easily be replicated as a science fair experiment.
Graduate students Manuel Balvin and Tara Iracki, and undergraduate Eunkyung Sohn, all from the Department of Chemical and Biomolecular Engineering, performed multiple trials using each type of bead. They progressively rotated the board, increasing the relative angle between gravity and the columns of the array (that is, altering the forcing angle). In doing so, they saw that the large particles did not move through the array in a diffuse or random manner as their small counterparts usually did in a microfluidic array. Instead, their paths were deterministic, meaning that they could be predicted with precision, Drazer said.
The researchers also noticed that the path followed by the balls was periodic once the balls were in motion and coincided with the direction of the lattice. As the forcing angle increased, some of the balls tended to shift over one, two, three or as many as four pegs before continuing their vertical fall.
"Our experiment shows that if you know one single parameter-a measure of the asymmetry in the motion of a particle around a single obstacle-you can predict the path that particles will follow in a microfluidic array at any forcing angle, simply by doing geometry." Drazer said.
The fact that the balls moved in the same direction inside the array for different forcing angles is referred to as phase locking. If the array were to be scaled down to micro- or nanosize, the researchers said they would expect these phenomena to still be present and even increase depending on the factors such as the unavoidable irregularities of particle size or surface roughness.
"There are forces present between a particle and an obstacle when they get really close to each other which are present whether the system is at the micro- or nanoscale or as large as the LEGO board," Frechette said. "In this separation method, the periodic arrangement of the obstacles allows the small effect of these forces to accumulate, and amplify, which we suspect is the mechanism for particle separation."
This principle could be applied to the design of micro- or nanofluidic arrays, she added, so that they could be fabricated to "sort particles that had a different roughness, different charge or different size. They should follow a different path in an array and could be collected separately."
Phase locking is likely to become less important, Drazer cautioned, as the number of particles in solution becomes more concentrated. "Next," he said, "we have to look at how concentrated your suspension can be before this principle is destroyed by particle-particle interactions."
Johns Hopkins University
Microfluidic Current Events and Microfluidic News RSS'No muss, no fuss' miniaturized analysis for complex samples developed
The goal of an integrated, miniaturized laboratory analysis system, also known as a "lab-on-a-chip," is simple: sample in, answer out.
Novel NIST connector uses magnets for leak-free microfluidic devices
Like other users of microfluidic systems, National Institute of Standards and Technology (NIST) researcher Javier Atencia was faced with an annoying engineering problem: how to simply, reliably and most of all, tightly, connect his tiny devices to the external pumps and reservoirs delivering liquids into the system.
Tiny injector to speed development of new, safer, cheaper drugs
It's no bigger than a stamp packet but it has the potential to allow rapid development of a new generation of drugs and genetic engineering organisms, and to better control in-vitro fertilization.
Caltech scientists solve decade-long mystery of nanopillar formations
Scientists at the California Institute of Technology (Caltech) have uncovered the physical mechanism by which arrays of nanoscale (billionths-of-a-meter) pillars can be grown on polymer films with very high precision, in potentially limitless patterns.
Team finds a better way to watch bacteria swim
Researchers have developed a new method for studying bacterial swimming, one that allows them to trap Escherichia coli bacteria and modify the microbes' environment without hindering the way they move.
New nanochemistry technique encases single molecules in microdroplets
Inventing a useful new tool for creating chemical reactions between single molecules, scientists at the National Institute of Standards and Technology (NIST) have employed microfluidics-the manipulation of fluids at the microscopic scale-to make microdroplets that contain single molecules of interest.
NIST calculations may improve temperature measures for microfluidics
If you wanted to know if your child had a fever or be certain that the roast in the oven was thoroughly cooked, you would, of course, use a thermometer that you trusted to give accurate readings at any temperature within its range.
'Microfluidic palette' may paint clearer picture of biological processes
The masterpieces that spring from the talents of Rembrandt, Van Gogh and other artists often begin with the creation of a gradient of colors on a palette.
Music is the engine of new U-M lab-on-a-chip device
Music, rather than electromechanical valves, can drive experimental samples through a lab-on-a-chip in a new system developed at the University of Michigan. This development could significantly simplify the process of conducting experiments in microfluidic devices.
New lab-on-a-chip measures mechanics of bacteria colonies
Researchers at the University of Michigan have devised a microscale tool to help them understand the mechanical behavior of biofilms, slimy colonies of bacteria involved in most human infectious diseases.
More Microfluidic Current Events and Microfluidic News Articles
 |
Fundamentals And Applications of Microfluidics, Second Edition (Integrated Microsystems) by Nam-Trung Nguyen (Author), Steven T. Wereley (Author) Updating the Artech House bestseller, Fundamentals and Applications of Microfluidics, this newly revised second edition provides electrical and mechanical engineers with complete and current coverage of microfluidics – an emerging field involving fluid flow and devices in microscale and nanoscale. The second edition offers a greatly expanded treatment of nanotechnology, electrokinetics and flow theory. The book shows engineers how to take advantage of the performance benefits of microfluidics and serves as an instant reference for state-of-the-art microfluidics technology and applications. The wide range of applications discussed includes fluid control devices, gas and fluid measurement devices, medical testing equipment, and implantable drug pumps. This cutting-edge resource... |
 |
Electrokinetically-Driven Microfluidics and Nanofluidics by Hsueh-Chia Chang (Author), Leslie Yeo (Author) Electrokinetics is currently the mechanism of choice for fluid actuation and bioparticle manipulation at microscale and nanoscale dimensions. There has recently been widespread interest in the use of AC electric fields, given the many advantages it offers over DC electrokinetics. Nevertheless, a fundamental understanding of the governing mechanisms underlying the complex and nonlinear physicochemical hydrodynamics associated with these systems is required before practical microfluidic and nanofluidic devices can be engineered. This text aims to provide a comprehensive treatise on both classical equilibrium electrokinetic phenomena as well as the more recent non-equilibrium phenomena associated with both DC and AC electrokinetics in the context of their application to the design of... |
 |
Introduction to Microfluidics by Patrick Tabeling (Author), Suelin Chen (Translator) Microfluidics deals with fluids flowing in miniaturized systems. It is a young discipline, which is expected to substantially expand over the next few years, stimulated by the considerable development of applications in the pharmaceutical, biomedical and chemical engineering domains. The book is an introduction to this discipline. In the first chapter, it presents a short historical background and discusses the main perspectives of the domain, at economical and scientific levels. Then the physics of miniaturization and the fluid mechanics of microflows are discussed. In the following three chapters, dispersion, electrical and thermal phenomena in miniaturized devices are presented. A brief introduction to microfabrication techniques is given in chapter six and the book concludes... |
|
Microfabrication Techniques for Microfluidics and BioMEMS [VHS] Starring: Marc J. Madou | |
 |
Biological Applications of Microfluidics by Frank A. Gomez (Editor) Microfluidics has numerous potential applications in biotechnology, pharmaceuticals, the life sciences, defense, public health, and agriculture. This book details recent advances in the biological applications of microfluidics, including cell sorting, DNA sequencing on-a-chip, microchip capillary electrophoresis, and synthesis on a microfluidic format. It covers microfabricated LOC technologies, advanced microfluidic tools, microfluidic culture platforms for stem cell and neuroscience research, and more. This is an all-in-one, hands-on resource for analytical chemists and researchers and an excellent text for students. |
 |
Theoretical Microfluidics (Oxford Master Series in Physics) by Henrik Bruus (Author) Microfluidics is a young and rapidly expanding scientific discipline, which deals with fluids and solutions in miniaturized systems, the so-called lab-on-a-chip systems. It has applications in chemical engineering, pharmaceutics, biotechnology and medicine. As the lab-on-a-chip systems grow in complexity, a proper theoretical understanding becomes increasingly important. The basic idea of the book is to provide a self-contained formulation of the theoretical framework of microfluidics, and at the same time give physical motivation and example from lab-on-a-chip technology. After three chapters introducing microfluidics, the governing questions for mass, momentum and energy, and some basic flow solutions, the following 14 chapters treat hydraulic resistance/compliance,... |
 |
Microdrops and Digital Microfluidics by Jean Berthier (Author) After spending over 12 years developing new microsystems for biotechnology û especially concerned with the microfluidic aspects of these devices û Jean Berthier is considered a leading authority in the field. Now, following the success of his book, Microfluidics for Biotechnology, Dr. Berthier returns to explain how new miniaturization techniques have dramatically expanded the area of microfluidic applications and microsystems into microdrops and digital microfluidics. Engineers interested in designing more versatile microsystems and students who seek to learn the fundamentals of microfluidics will all appreciate the wide-range of information found within Microdrops and Digital Microfluidics. The most recent developments in digital microfluidics are described in clear... |
|
Microfluidics for Biotechnology by Jean Berthier (Author), Pascal Silberzan (Author) The application of microfluidics to biotechnology is an exciting new area that has already begun to revolutionize how researchers study and manipulate macromolecules like DNA, proteins and cells in vitro and within living organisms. Now in a newly revised and expanded second edition, the Artech House bestseller, "Microfluidics for Biotechnology" brings professionals and students to the cutting edge of this burgeoning field. Featuring numerous updates and including three entirely new chapters, this book provides a detailed look at the mechanical behavior of the different types of micro/nano particles and macromolecules that are used in biotechnology. Engineers and laboratory researchers involved with the conception and design of bio-tech microdevices, as well as graduate and post-graduate... | |
 |
Fluid Mechanics for Chemical Engineers with Microfluidics and CFD (2nd Edition) by James O. Wilkes (Author) The Chemical Engineer's Practical Guide to Contemporary Fluid Mechanics Since most chemical processing applications are conducted either partially or totally in the fluid phase, chemical engineers need a strong understanding of fluid mechanics. Such knowledge is especially valuable for solving problems in the biochemical, chemical, energy, fermentation, materials, mining, petroleum, pharmaceuticals, polymer, and waste-processing industries. Fluid Mechanics for Chemical Engineers, Second Edition, with Microfluidics and CFD, systematically introduces fluid mechanics from the perspective of the chemical engineer who must understand actual physical behavior and solve real-world problems. Building on a first edition that earned Choice Magazine's Outstanding Academic Title award, this edition... |
 |
Lab on a Chip Technology: Fabrication and Microfluidics by Keith E. Herold (Editor), Avraham Rasooly (Editor) |
| © 2009 BrightSurf.com |