 |
|
Electrical circuit runs entirely off power in trees
September 09, 2009You've heard about flower power. What about tree power? It turns out that it's there, in small but measurable quantities. There's enough power in trees for University of Washington researchers to run an electronic circuit, according to results to be published in an upcoming issue of the Institute of Electrical and Electronics Engineers' Transactions on Nanotechnology.
"As far as we know this is the first peer-reviewed paper of someone powering something entirely by sticking electrodes into a tree," said co-author Babak Parviz, a UW associate professor of electrical engineering.
A study last year from the Massachusetts Institute of Technology found that plants generate a voltage of up to 200 millivolts when one electrode is placed in a plant and the other in the surrounding soil. Those researchers have since started a company developing forest sensors that exploit this new power source.
The UW team sought to further academic research in the field of tree power by building circuits to run off that energy. They successfully ran a circuit solely off tree power for the first time.
Co-author Carlton Himes, a UW undergraduate student, spent last summer exploring likely sites. Hooking nails to trees and connecting a voltmeter, he found that bigleaf maples, common on the UW campus, generate a steady voltage of up to a few hundred millivolts.
The UW team next built a device that could run on the available power. Co-author Brian Otis, a UW assistant professor of electrical engineering, led the development of a boost converter, a device that takes a low incoming voltage and stores it to produce a greater output. His team's custom boost converter works for input voltages of as little as 20 millivolts (a millivolt is one-thousandth of a volt), an input voltage lower than any existing such device. It produces an output voltage of 1.1 volts, enough to run low-power sensors.
The UW circuit is built from parts measuring 130 nanometers and it consumes on average just 10 nanowatts of power during operation (a nanowatt is one billionth of a watt).
"Normal electronics are not going to run on the types of voltages and currents that we get out of a tree. But the nanoscale is not just in size, but also in the energy and power consumption," Parviz said.
"As new generations of technology come online," he added, "I think it's warranted to look back at what's doable or what's not doable in terms of a power source."
Despite using special low-power devices, the boost converter and other electronics would spend most of their time in sleep mode in order to conserve energy, creating a complication.
"If everything goes to sleep, the system will never wake up," Otis said.
To solve this problem Otis' team built a clock that runs continuously on 1 nanowatt, about a thousandth the power required to run a wristwatch, and when turned on operates at 350 millivolts, about a quarter the voltage in an AA battery. The low-power clock produces an electrical pulse once every few seconds, allowing a periodic wakeup of the system.
The tree-power phenomenon is different from the popular potato or lemon experiment, in which two different metals react with the food to create an electric potential difference that causes a current to flow.
"We specifically didn't want to confuse this effect with the potato effect, so we used the same metal for both electrodes," Parviz said.
Tree power is unlikely to replace solar power for most applications, Parviz admits. But the system could provide a low-cost option for powering tree sensors that might be used to detect environmental conditions or forest fires. The electronic output could also be used to gauge a tree's health.
"It's not exactly established where these voltages come from. But there seems to be some signaling in trees, similar to what happens in the human body but with slower speed," Parviz said. "I'm interested in applying our results as a way of investigating what the tree is doing. When you go to the doctor, the first thing that they measure is your pulse. We don't really have something similar for trees."
Other co-authors are Eric Carlson and Ryan Ricchiuti of the UW. The research was funded in part by the National Science Foundation.
University of Washington
The UW team sought to further academic research in the field of tree power by building circuits to run off that energy. They successfully ran a circuit solely off tree power for the first time.
Co-author Carlton Himes, a UW undergraduate student, spent last summer exploring likely sites. Hooking nails to trees and connecting a voltmeter, he found that bigleaf maples, common on the UW campus, generate a steady voltage of up to a few hundred millivolts.
The UW team next built a device that could run on the available power. Co-author Brian Otis, a UW assistant professor of electrical engineering, led the development of a boost converter, a device that takes a low incoming voltage and stores it to produce a greater output. His team's custom boost converter works for input voltages of as little as 20 millivolts (a millivolt is one-thousandth of a volt), an input voltage lower than any existing such device. It produces an output voltage of 1.1 volts, enough to run low-power sensors.
The UW circuit is built from parts measuring 130 nanometers and it consumes on average just 10 nanowatts of power during operation (a nanowatt is one billionth of a watt).
"Normal electronics are not going to run on the types of voltages and currents that we get out of a tree. But the nanoscale is not just in size, but also in the energy and power consumption," Parviz said.
"As new generations of technology come online," he added, "I think it's warranted to look back at what's doable or what's not doable in terms of a power source."
Despite using special low-power devices, the boost converter and other electronics would spend most of their time in sleep mode in order to conserve energy, creating a complication.
"If everything goes to sleep, the system will never wake up," Otis said.
To solve this problem Otis' team built a clock that runs continuously on 1 nanowatt, about a thousandth the power required to run a wristwatch, and when turned on operates at 350 millivolts, about a quarter the voltage in an AA battery. The low-power clock produces an electrical pulse once every few seconds, allowing a periodic wakeup of the system.
The tree-power phenomenon is different from the popular potato or lemon experiment, in which two different metals react with the food to create an electric potential difference that causes a current to flow.
"We specifically didn't want to confuse this effect with the potato effect, so we used the same metal for both electrodes," Parviz said.
Tree power is unlikely to replace solar power for most applications, Parviz admits. But the system could provide a low-cost option for powering tree sensors that might be used to detect environmental conditions or forest fires. The electronic output could also be used to gauge a tree's health.
"It's not exactly established where these voltages come from. But there seems to be some signaling in trees, similar to what happens in the human body but with slower speed," Parviz said. "I'm interested in applying our results as a way of investigating what the tree is doing. When you go to the doctor, the first thing that they measure is your pulse. We don't really have something similar for trees."
Other co-authors are Eric Carlson and Ryan Ricchiuti of the UW. The research was funded in part by the National Science Foundation.
University of Washington
Electronic Circuit Current Events and Electronic Circuit News RSSScientists create first working model of a 2-qubit electronic quantum processor
A team led by Yale University researchers has successfully implemented simple algorithms using a quantum processor based on microwave solid-state technology--similar to that found in computers and cell phones.
Scientists create metal that pumps liquid uphill
In nature, trees pull vast amounts of water from their roots up to their leaves hundreds of feet above the ground through capillary action, but now scientists at the University of Rochester have created a simple slab of metal that lifts liquid using the same principle-but does so at a speed that would make nature envious.
UCSB researchers describe breakthrough in the quantum control of light
Researchers at UC Santa Barbara have recently demonstrated a breakthrough in the quantum control of photons, the energy quanta of light.
Quantum dance: Discovery led by Princeton researchers could revolutionize computing
An international team of scientists, led by a Princeton University group, has observed an exciting and strange behavior in electrons' spin within a new material that could be harnessed to transform computing and electronics.
Decrease-radix design principle for multi-valued logic units and its application
The DRD theory, proposed by Prof. Yi Jin, Dr. Jun-Yong Yan and Dr.Kai-zhong Zuo, presents a theoretical and technological guide for the design of multi-valued computers.
MIT: Computer model reveals cells' inner workings
After spending years developing a computational model to help illuminate cell signaling pathways, a team of MIT researchers decided to see what would happen if they "broke" the model.
UCSB researchers make milestone discovery in quantum mechanics
Researchers at UC Santa Barbara have recently reached what they are calling a milestone in experimental quantum mechanics.
Contact lenses with circuits, lights a possible platform for superhuman vision
Movie characters from the Terminator to the Bionic Woman use bionic eyes to zoom in on far-off scenes, have useful facts pop into their field of view, or create virtual crosshairs. Off the screen, virtual displays have been proposed for more practical purposes -- visual aids to help vision-impaired people, holographic driving control panels and even as a way to surf the Web on the go.
Chalmers first with integrated receiver for high frequency applications
As the first research group in the world, researchers at Chalmers have succeeded in combining a receiver for high frequencies with an antenna on a small chip.
Artificial atoms make microwave photons countable
Using artificial atoms on a chip, Yale physicists have taken the next step toward quantum computing by demonstrating that the particle nature of microwave photons can now be detected, according to a report spotlighted in the February 1 issue of the journal Nature.
More Electronic Circuit Current Events and Electronic Circuit News Articles
 |
Electronic Circuits - Fundamentals & Applications, Third Edition by Mike Tooley BA; Advanced Technological and Higher National Certificates Kingston University (Author) Electronic Circuits is a unique combination of a comprehensive reference text and a practical electronics handbook in one volume. Mike Tooley provides all the essential information required to get to grips with the fundamentals of electronics, detailing the underpinning knowledge necessary to appreciate the operation of a wide range of electronic circuits, including amplifiers, logic circuits, power supplies and oscillators. The third edition now offers an even more extensive range of topics, with extended coverage of practical areas such as circuit construction and fault finding, and new topics including circuit simulation, electronic CAD and a brand new chapter devoted to the PIC microcontroller. A new companion website at http://www.key2electronics.com offers the... |
 |
Encyclopedia of Electronic Circuits, Volume 7 by Rudolf Graf (Author), William Sheets (Author) An extensive library of 1,000 circuits from the bestselling, six-volume Encyclopedia of Electronic Circuits. Praise for previous volumes: "Looking for a good electronic circuit cookbook? This is it."--Modern Times. "A treasurehouse...an invaluable reference tool for every hobbyist, technician, student, and design professional,"--Electronics For You. "...a ready source to which to turn for just about any type of circuit you can imagine...--Modern Electronics. New in the bestselling series! One thousand more leading-edge circuit designs! Designed for quick reference and on-the-job use, the Encyclopedia of Electronic Circuits, Volume 7, puts over 1000 state-of-the-art electronic and integrated circuit designs at your fingertips. Organized alphabetically by circuit type, this all-new... |
 |
Electronic Circuit Guidebook, Vol 1: Sensors by Joseph Carr (Author) Includes information about typical sensors, along with a large amount of information about analog sensor circuitry. Amplifier circuits are especially well covered, along with differential amplifiers, analog signal processing circuits and more. |
 |
Electronic Circuits for the Evil Genius: 57 Lessons with Projects by Dave Cutcher (Author) There is truly a lack of good, basic hardwire electronic "how-to" books. The market seems interested in this type of fun project compilation. This is another book in our extremely successful "Evil Genius" series. So far, each of the books has sold about $50,000 in less than 3 months. With this book and another (Scrap Electronics for the Evil Genius), we should have a nice "cluster" for our next catalog. The perfect addition to our "Evil Genius" series, this book details everything an electronics hobbyist would want to know about circuits and circuit design through 57 Lessons. Readers work through 5 distinct, useful projects to reinforce their learning. |
 |
Elenco Electronics Snap Circuits Extreme SC-750 by Elenco Electronics Inc The SC-750 is packed with action, featuring more than 750 experiments including 73 computer-interfaced experiments. Young builders will learn about electromagnets, solar-powered experiments and vibration switches. Projects involve Strobe Lights, Transistor AM Radio, Electromagnetism and Rechargeable Battery. Kit contains over 80 parts. Requires 4 "AA" batteries, not included. |
 |
Introduction to Electronic Circuit Design by Richard Spencer (Author), Mohammed Ghausi (Author) For two-semester/three-quarter, upper-level courses in Electronic Circuit Design. A basic understanding of circuit design is useful for many engineers-even those who may never actually design a circuit-because it is likely that they will fabricate, test, or use these circuits in some way during their careers. This text provides a thorough and rigorous explanation of both analog and digital transistor-level circuit design with a focus on the underlying principles of how different circuits work-instead of relying completely on design procedures or "rules of thumb." In this way, students develop the intuition that is essential to understanding and solving design problems. |
 |
The Circuit Designer's Companion, Second Edition (EDN Series for Design Engineers) by Tim Williams (Author) Tim Williams' Circuit Designer's Companion provides a unique masterclass in practical electronic design that draws on his considerable experience as a consultant and design engineer. As well as introducing key areas of design with insider's knowledge, Tim focuses on the art of designing circuits so that every production model will perform its specified function - and no other unwanted function - reliably over its lifetime. The combination of design alchemy and awareness of commercial and manufacturing factors makes this an essential companion for the professional electronics designer. Topics covered include analog and digital circuits, component types, power supplies and printed circuit board design. The second edition includes new material on microcontrollers, surface... |
 |
All New Electronics Self-Teaching Guide (Wiley Self Teaching Guides) by Harry Kybett (Author), Mr. Earl Boysen (Author) For almost 30 years, this book has been a classic text for electronics enthusiasts. Now completely updated for todays technology with easy explanations and presented in a more user-friendly format, this third edition helps you learn the essentials you need to work with electronic circuits. All you need is a general understanding of electronics concepts such as Ohms law and current flow, and an acquaintance with first-year algebra. The question-and-answer format, illustrative experiments, and self-tests at the end of each chapter make it easy for you to learn at your own speed. |
 |
The Art of Electronics by Paul Horowitz (Author), Winfield Hill (Author) This is the thoroughly revised and updated Second Edition of the hugely successful The Art of Electronics. Widely accepted as the single, authoritative text and reference on electronic circuit design, both analog and digital, this book has sold over 120,000 copies, and has been translated into eight languages. This book revolutionized the teaching of electronics by emphasizing the methods actually used by circuit designers--a combination of some basic laws, rules of thumb, and a large bag of tricks. The result is a largely nonmathematical treatment that encourages circuit intuition, brain storming, and simplified calculations of circuit values and performance. This completely new edition responds to the breakneck pace of change in electronics with totally rewritten chapters on... |
 |
Electric Circuits (8th Edition) by James W. Nilsson (Author), Susan Riedel (Author) Electric Circuits, Eighth Edition features a new design,a four-color format, and 80% of chapter problems have been updated. In the midst of these changes, the book retains the goals that have made it a best-seller: 1) To build an understanding of concepts and ideas explicitly in terms of previous learning; 2) To emphasize the relationship between conceptual understanding and problem solving approaches; 3) To provide readers with a strong foundation of engineering practices. Chapter topics include Circuit Variables; Circuit Elements; Simple Resistive Circuits; Techniques of Circuit Analysis; The Operational Amplifier; Inductors, Capacitors, and Mutual Inductance; Response of First-Order RL and RC Circuits; Natural and Step Responses of RLC Circuits; Sinusoidal Steady-State Analysis;... |
| © 2009 BrightSurf.com |