 |
|
Harvard scientists bend nanowires into 2-D and 3-D structures
October 22, 2009Taking nanomaterials to a new level of structural complexity, scientists have determined how to introduce kinks into arrow-straight nanowires, transforming them into zigzagging two- and three-dimensional structures with correspondingly advanced functions.
The work is described this week in the journal Nature Nanotechnology by Harvard University researchers led by Bozhi Tian and Charles M. Lieber.
Among other possible applications, the authors say, the new technology could foster a new nanoscale approach to detecting electrical currents in cells and tissues.
"We are very excited about the prospects this research opens up for nanotechnology," says Lieber, Mark Hyman, Jr. Professor of Chemistry in Harvard's Faculty of Arts and Sciences. "For example, our nanostructures make possible integration of active devices in nanoelectronic and photonic circuits, as well as totally new approaches for extra- and intracellular biological sensors. This latter area is one where we already have exciting new results, and one we believe can change the way much electrical recording in biology and medicine is carried out."
Lieber and Tian's approach involves the controlled introduction of triangular "stereocenters" -- essentially, fixed 120° joints -- into nanowires, structures that have previously been rigidly linear. These stereocenters, analogous to the chemical hubs found in many complex organic molecules, introduce kinks into 1-D nanostructures, transforming them into more complex forms.
The researchers were able to introduce stereocenters as nanowires self-assembled. They halted growth of the 1-D nanostructures for 15 seconds by removing key gaseous reactants from the chemical brew in which the process was taking place, replacing these reactants after joints had been introduced into the nanostructures. This approach resulted in a 40 percent yield of bent nanowires, which can then be purified to achieve higher yields.
"The stereocenters appear as 'kinks,' and the distance between kinks is completely controlled," says Tian, a research assistant in Harvard's Department of Chemistry and Chemical Biology. "Moreover, we demonstrated the generality of our approach through synthesis of 2-D silicon, germanium, and cadmium sulfide nanowire structures."
The research by Lieber and Tian is the latest in a years-long effort by scientists to control the composition and structure of nanowires during synthesis. Despite advances in these areas, the ability to control the design and growth of self-assembling nanostructures has been limited.
Lieber and Tian's work takes the formation of 2-D nanostructures a step further by enabling the introduction of electronic devices at the stereocenters.
"An important concept that emerged from these studies is that of introducing functionality at defined nanoscale points for the first time -- in other words, nanodevices that can 'self-label,'" Lieber says. "We illustrated this novel capability by the insertion of p-n diodes and field-effect transistors precisely at the stereocenters."
Such self-labeled structures could open up the possibility of introducing nanoelectronics, photodetectors, or biological sensors into complex nanoscale structures.
Harvard University
"We are very excited about the prospects this research opens up for nanotechnology," says Lieber, Mark Hyman, Jr. Professor of Chemistry in Harvard's Faculty of Arts and Sciences. "For example, our nanostructures make possible integration of active devices in nanoelectronic and photonic circuits, as well as totally new approaches for extra- and intracellular biological sensors. This latter area is one where we already have exciting new results, and one we believe can change the way much electrical recording in biology and medicine is carried out."
Lieber and Tian's approach involves the controlled introduction of triangular "stereocenters" -- essentially, fixed 120° joints -- into nanowires, structures that have previously been rigidly linear. These stereocenters, analogous to the chemical hubs found in many complex organic molecules, introduce kinks into 1-D nanostructures, transforming them into more complex forms.
The researchers were able to introduce stereocenters as nanowires self-assembled. They halted growth of the 1-D nanostructures for 15 seconds by removing key gaseous reactants from the chemical brew in which the process was taking place, replacing these reactants after joints had been introduced into the nanostructures. This approach resulted in a 40 percent yield of bent nanowires, which can then be purified to achieve higher yields.
"The stereocenters appear as 'kinks,' and the distance between kinks is completely controlled," says Tian, a research assistant in Harvard's Department of Chemistry and Chemical Biology. "Moreover, we demonstrated the generality of our approach through synthesis of 2-D silicon, germanium, and cadmium sulfide nanowire structures."
The research by Lieber and Tian is the latest in a years-long effort by scientists to control the composition and structure of nanowires during synthesis. Despite advances in these areas, the ability to control the design and growth of self-assembling nanostructures has been limited.
Lieber and Tian's work takes the formation of 2-D nanostructures a step further by enabling the introduction of electronic devices at the stereocenters.
"An important concept that emerged from these studies is that of introducing functionality at defined nanoscale points for the first time -- in other words, nanodevices that can 'self-label,'" Lieber says. "We illustrated this novel capability by the insertion of p-n diodes and field-effect transistors precisely at the stereocenters."
Such self-labeled structures could open up the possibility of introducing nanoelectronics, photodetectors, or biological sensors into complex nanoscale structures.
Harvard University
Nanostructures Current Events and Nanostructures News RSSUnderstanding mechanical properties of silicon nanowires paves way for nanodevices
Silicon nanowires are attracting significant attention from the electronics industry due to the drive for ever-smaller electronic devices, from cell phones to computers.
Engineers image nanostructure of a solid acid catalyst and boost its catalytic activity
The catalytic processes that facilitate the production of many chemicals and fuels could become much more environmentally friendly thanks to a breakthrough achieved by researchers from Lehigh and Rice Universities.
LANL Roadrunner simulates nanoscale material failure
Very tiny wires, called nanowires, made from such metals as silver and gold, may play a crucial role as electrical or mechanical switches in the development of future-generation ultrasmall nanodevices.
Transforming Nanowires Into Nano-Tools Using Cation Exchange Reactions
A team of engineers from the University of Pennsylvania has transformed simple nanowires into reconfigurable materials and circuits, demonstrating a novel, self-assembling method for chemically creating nanoscale structures that are not possible to grow or obtain otherwise.
Berkeley Researchers Find New Route to Nano Self-Assembly
If the promise of nanotechnology is to be fulfilled, nanoparticles will have to be able to make something of themselves. An important advance towards this goal has been achieved by researchers with the U.S. Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) who have found a simple and yet powerfully robust way to induce nanoparticles to assemble themselves into complex arrays.
Caltech scientists solve decade-long mystery of nanopillar formations
Scientists at the California Institute of Technology (Caltech) have uncovered the physical mechanism by which arrays of nanoscale (billionths-of-a-meter) pillars can be grown on polymer films with very high precision, in potentially limitless patterns.
Smallest Nanoantennas for High-speed Data Networks
More than 120 years after the discovery of the electromagnetic character of radio waves by Heinrich Hertz, wireless data transmission dominates information technology.
Penn team uses self-assembly to make molecule-sized particles with patches of charge
Physicists, chemists and engineers at the University of Pennsylvania have demonstrated a novel method for the controlled formation of patchy particles, using charged, self-assembling molecules that may one day serve as drug-delivery vehicles to combat disease and perhaps be used in small batteries that store and release charge.
'NanoPen' may write new chapter in nanotechnology manufacturing
Researchers in California are reporting development of a so-called "NanoPen" that could provide a quick, convenient way of laying down patterns of nanoparticles - from wires to circuits - for making futuristic electronic devices, medical diagnostic tests, and other much-anticipated nanotech applications.
Caltech and IBM scientists use self-assembled DNA scaffolding to build tiny circuit boards
Scientists at the California Institute of Technology (Caltech) and IBM's Almaden Research Center have developed a new technique to orient and position self-assembled DNA shapes and patterns-or "DNA origami"-on surfaces that are compatible with today's semiconductor manufacturing equipment.
More Nanostructures Current Events and Nanostructures News Articles
 |
Transport in Nanostructures by David K. Ferry (Author), Stephen M. Goodnick (Author), Jonathan Bird (Author) The advent of semiconductor structures whose characteristic dimensions are smaller than the mean free path of carriers has led to the development of novel devices, and advances in theoretical understanding of mesoscopic systems or nanostructures. This book has been thoroughly revised and provides a much-needed update on the very latest experimental research into mesoscopic devices and develops a detailed theoretical framework for understanding their behavior. Beginning with the key observable phenomena in nanostructures, the authors describe quantum confined systems, transmission in nanostructures, quantum dots, and single electron phenomena. Separate chapters are devoted to interference in diffusive transport, temperature decay of fluctuations, and non-equilibrium transport and... |
 |
Nanostructures and Nanomaterials: Synthesis, Properties & Applications by Guozhong Cao (Author) This important book focuses on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study... |
 |
Mesoscopic Electronics in Solid State Nanostructures by Thomas Heinzel (Author) This text treats electronic transport in the regime where conventional textbook models are no longer applicable, including the effect of electronic phase coherence, energy quantization and single-electron charging. This second edition is completely updated and expanded, and now comprises new chapters on spin electronics and quantum information processing, transport in inhomogeneous magnetic fields, organic/molecular electronics, and applications of field effect transistors. The book also provides an overview of semiconductor processing technologies and experimental techniques. With a number of examples and problems with solutions, this is an ideal introduction for students and beginning researchers in the field. "This book is a useful tool, too, for the experienced researcher to... |
 |
Mechanical Properties of Polymers based on Nanostructure and Morphology by G. H. Michler (Editor), F. J. Baltá-Calleja (Editor) The improvement of strength and durability in polymers has implications relevant to industrial, medical, and household applications. Enhanced by the improved knowledge of the interactions between complex hierarchical structures and functional requirements, Mechanical Properties of Polymers Based on Nanostructure and Morphology focuses on new polymer materials that possess a combination of improved mechanical and other physical properties. This book specifies techniques used in structural and morphological characterization, discusses crazing and molecular variables of fracture behavior, and clarifies various modes of deformation mechanisms and orientation processes for semicrystalline polymers, block copolymers, and composites. The volume examines microindentation hardness studies... |
 |
Alternative Lithography: Unleashing the Potentials of Nanotechnology (Nanostructure Science and Technology) by C.M. Sotomayor Torres (Editor) This book intended for academic and industrial research scientists and engineers, as well as industrial laboratories working on sensors, biotechnology and opto/electronics details in 17 chapters state-of-the-art technologies and the prospects for micro-contact printing and nanoimprint lithography. |
 |
Introduction to Nanoscale Science and Technology (Nanostructure Science and Technology) by Massimiliano Di Ventra (Editor), Stephane Evoy (Editor), James R. Heflin (Editor) Nanoscale science and technology is a young, promising field that encompasses a wide range of disciplines including physics, chemistry, biology, electrical engineering, chemical engineering, and materials science. With rapid advances in areas such as molecular electronics, synthetic biomolecular motors, DNA-based self-assembly, and manipulation of individual atoms, nanotechnology has captured the attention and imagination of researchers and the general public. Introduction to Nanoscale Science and Technology provides a broad and thorough introduction that is aimed specifically at undergraduate seniors and early graduate students in all of the disciplines enumerated above. It will also be of value to academic, industrial, and government researchers interested in a primer in the field. ... |
 |
Self-Assembled Nanostructures (Nanostructure Science and Technology) by Jin Zhang (Author), Zhong-lin Wang (Author), Jun Liu (Author), Shaowei Chen (Author), Gang-yu Liu (Author) Nanostructures refer to materials that have relevant dimensions on the nanometer length scales and reside in the mesoscopic regime between isolated atoms and molecules in bulk matter. These materials have unique physical properties that are distinctly different from bulk materials. "Self-Assembled Nanostructures" provides systematic coverage of basic nanomaterials science, including materials assembly and synthesis, characterization, and application. Suitable for both beginners and experts, it balances the chemistry aspects of nanomaterials with physical principles. It also highlights nanomaterial-based architectures including assembled or self-assembled systems. Filled with in-depth discussion of important applications of nano-architectures as well as potential applications ranging from... |
 |
Composites with Micro- and Nano-Structure: Computational Modeling and Experiments (Computational Methods in Applied Sciences) by Vladimir Kompis (Editor) This book contains selected, extended papers presented in the thematic ECCOMAS conference on Composites with Micro- and Nano-Structure (CMNS) â Computational Modelling and Experiments held in Liptovský MikuláÅ¡, Slovakia, in May 28 to 31, 2007, as well as three other papers. Recent experimental and computational results demonstrate that materials reinforced with stiff particles and fibres can obtain substantial improvements in stiffness, thermal conductivity and electro-magnetic properties. Materials reinforced with fibres can have very different properties in different directions. With these new materials the importance of computational simulations and experimental verifications also increases. The book contains atomistic and continuum numerical methods and... |
 |
Zinc Oxide Bulk, Thin Films and Nanostructures: Processing, Properties, and Applications by Chennupati Jagadish (Editor), Stephen J. Pearton (Editor) With an in-depth exploration of the following topics, this book covers the broad uses of zinc oxide within the fields of materials science and engineering: - Recent advances in bulk , thin film and nanowire growth of ZnO (including MBE, MOCVD and PLD), - The characterization of the resulting material (including the related ternary systems ZgMgO and ZnCdO), - Improvements in device processing modules (including ion implantation for doping and isolation ,Ohmic and Schottky contacts , wet and dry etching), - The role of impurities and defects on materials properties - Applications of ZnO in UV light emitters/detectors, gas, biological and chemical-sensing, transparent electronics, spintronics and thin film |
 |
Quantum Wells, Wires and Dots: Theoretical and Computational Physics of Semiconductor Nanostructures by Paul Harrison (Author) As with the successful second edition, Quantum Wells, Wires and Dots, Third Edition provides all the essential information, both theoretical and computational, so the reader can, starting from essentially nothing, understand how the electronic, optical, and transport properties of semiconductor heterostructures are calculated. This text leads the reader through a series of simple theoretical and computational implementations, to slowly build from solid foundations, to a level where the reader can begin to initiate theoretical investigations or explanations of their own. |
| © 2009 BrightSurf.com |