 |
|
Installed cost of solar photovoltaic systems in the US fell in 2008
October 22, 2009Researchers at the Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) released a new study on the installed costs of solar photovoltaic (PV) power systems in the U.S., showing that the average cost of these systems declined by more than 30 percent from 1998 to 2008. Within the last year of this period, costs fell by more than 4 percent.
The number of solar PV systems in the U.S. has been growing at a rapid rate in recent years, as governments at the national, state, and local levels have offered various incentives to expand the solar market. With this growth comes a greater need to track and understand trends in the installed cost of PV.
"A goal of government incentive programs is to help drive the cost of PV systems lower. One purpose of this study is to provide reliable information about the costs of installed systems over time," says report co-author Ryan Wiser.
According to the report, the most recent decline in costs is primarily the result of a decrease in PV module costs. "The reduction in installed costs from 2007 to 2008 marks an important departure from the trend of the preceding three years, during which costs remained flat as rapidly expanding U.S. and global PV markets put upward pressure on both module prices and non-module costs. This dynamic began to shift in 2008, as expanded manufacturing capacity in the solar industry, in combination with the global financial crisis, led to a decline in wholesale module prices," states the report, which was written by Wiser, Galen Barbose, Carla Peterman, and Naim Darghouth of Berkeley Lab's Environmental Energy Technologies Division.
In contrast, cost reductions from 1998 through 2007 were largely due to a decline in non-module costs, such as the cost of labor, marketing, overhead, inverters, and the balance of systems.
The study-the second in an ongoing series that tracks the installed cost of PV-examined 52,000 grid-connected PV systems installed between 1998 and 2008 in 16 states. It found that average installed costs, in terms of real 2008 dollars, declined from $10.80 per watt (W) in 1998 to $7.50/W in 2008, equivalent to an average annual reduction of $0.30/W, or 3.6 percent per year in real dollars.
Costs Differ by Region and Type of System
Other information about differences in costs by region and by installation type emerged from the study. The cost reduction over time was largest for smaller PV systems, such as those used to power individual households. Also, installed costs show significant economies of scale-small residential PV systems completed in 2008 that were less than 2 kilowatts (kW) in size averaged $9.20/W, while large commercial systems in the range of 500 to 750 kW averaged $6.50/W.
Installed costs were also found to vary widely across states. Among systems completed in 2008 and less than 10 kW in size, average costs range from a low of $7.30/W in Arizona, followed by California, which had average installed costs of $8.20/W, to a high of $9.90/W in Pennsylvania and Ohio. Based on these data, and on installed cost data from the sizable German and Japanese PV markets, the authors suggest that PV costs can be driven lower through large-scale deployment programs.
The study also found that the new construction market offers cost advantages for residential PV systems. Among small residential PV systems in California completed in 2008, those systems installed in residential new construction cost $0.80/W less than comparably-sized systems installed in rooftop retrofit applications.
Cash Incentives Declined
The study also found that the average size of direct cash incentives provided by state and local PV incentive programs declined over the 1998-2008 study period. Other sources of incentives, however, such as federal investment tax credits (ITCs), have become more significant. For commercial PV systems, the average combined after-tax value of federal and state ITCs, plus direct cash incentives provided by state and local incentive programs, was $4.00/W in 2008, down slightly from its peak in 2006 but still a near-record-high. Total after-tax incentives for residential systems, on the other hand, were at an historic low in 2008, averaging $2.90/W, their lowest level within the 11-year study period.
The drop in total after-tax incentives for both commercial and residential PV from 2007 to 2008 more than offset the cost reduction over this period, leading to a slight rise in the net installed cost, or the installed cost facing a customer after receipt of financial incentives. For residential PV, net installed costs in 2008 averaged $5.40/W, up 1% from the previous year. Net installed costs for commercial PV averaged $4.20/W, a 5% rise from 2007.
DOE/Lawrence Berkeley National Laboratory
According to the report, the most recent decline in costs is primarily the result of a decrease in PV module costs. "The reduction in installed costs from 2007 to 2008 marks an important departure from the trend of the preceding three years, during which costs remained flat as rapidly expanding U.S. and global PV markets put upward pressure on both module prices and non-module costs. This dynamic began to shift in 2008, as expanded manufacturing capacity in the solar industry, in combination with the global financial crisis, led to a decline in wholesale module prices," states the report, which was written by Wiser, Galen Barbose, Carla Peterman, and Naim Darghouth of Berkeley Lab's Environmental Energy Technologies Division.
In contrast, cost reductions from 1998 through 2007 were largely due to a decline in non-module costs, such as the cost of labor, marketing, overhead, inverters, and the balance of systems.
The study-the second in an ongoing series that tracks the installed cost of PV-examined 52,000 grid-connected PV systems installed between 1998 and 2008 in 16 states. It found that average installed costs, in terms of real 2008 dollars, declined from $10.80 per watt (W) in 1998 to $7.50/W in 2008, equivalent to an average annual reduction of $0.30/W, or 3.6 percent per year in real dollars.
Costs Differ by Region and Type of System
Other information about differences in costs by region and by installation type emerged from the study. The cost reduction over time was largest for smaller PV systems, such as those used to power individual households. Also, installed costs show significant economies of scale-small residential PV systems completed in 2008 that were less than 2 kilowatts (kW) in size averaged $9.20/W, while large commercial systems in the range of 500 to 750 kW averaged $6.50/W.
Installed costs were also found to vary widely across states. Among systems completed in 2008 and less than 10 kW in size, average costs range from a low of $7.30/W in Arizona, followed by California, which had average installed costs of $8.20/W, to a high of $9.90/W in Pennsylvania and Ohio. Based on these data, and on installed cost data from the sizable German and Japanese PV markets, the authors suggest that PV costs can be driven lower through large-scale deployment programs.
The study also found that the new construction market offers cost advantages for residential PV systems. Among small residential PV systems in California completed in 2008, those systems installed in residential new construction cost $0.80/W less than comparably-sized systems installed in rooftop retrofit applications.
Cash Incentives Declined
The study also found that the average size of direct cash incentives provided by state and local PV incentive programs declined over the 1998-2008 study period. Other sources of incentives, however, such as federal investment tax credits (ITCs), have become more significant. For commercial PV systems, the average combined after-tax value of federal and state ITCs, plus direct cash incentives provided by state and local incentive programs, was $4.00/W in 2008, down slightly from its peak in 2006 but still a near-record-high. Total after-tax incentives for residential systems, on the other hand, were at an historic low in 2008, averaging $2.90/W, their lowest level within the 11-year study period.
The drop in total after-tax incentives for both commercial and residential PV from 2007 to 2008 more than offset the cost reduction over this period, leading to a slight rise in the net installed cost, or the installed cost facing a customer after receipt of financial incentives. For residential PV, net installed costs in 2008 averaged $5.40/W, up 1% from the previous year. Net installed costs for commercial PV averaged $4.20/W, a 5% rise from 2007.
DOE/Lawrence Berkeley National Laboratory
Europe, the bright spark in converting sunlight into electricity: First ever calibration laboratory accreditation.
Solar Photovoltaic Systems converting sunlight into electricity are a key technology in reaching Europe's objectives of safe, secure and sustainable energy supply. World-wide production of solar electricity has continued to increase by more than 30% per year, reaching 1000 megawatts (enough to meet the domestic needs of 660.000 European citizens) in 2004 and has become one of Europe's foremost growth industries. Certified power measurements are crucial to guaranteeing the competitiveness of solar electricity, as any measurement uncertainty could translate directly into lost revenue. In Germany alone, where over 400 megawatts are installed, representing over 2 billion Euro, a measurement erro
PRESS CONFERENCE - Presentation of the UnivERsol project to promote the development of photovoltaic energy in Europe
On Monday 14th January at the Barcelona Science Park, a press conference will be held to mark the public presentation of the "UnivERsol" project (Universities, Renewable Energies, solar), which is co-financed by the Directorate General for Transport and Energy (DGTREN) of the European Commission. This project aims to promote the use of solar photovoltaic systems to generate electricity. Large photovoltaic electricity generators will be installed in 25 university buildings or cultural centres in Great Britain, France, the Netherlands and Spain, thereby promoting the development of "green campuses" and "green municipalities", the forerunners of sustainable cities. In
More Solar Photovoltaic Systems Current Events and Solar Photovoltaic Systems News Articles
 |
The 2009 Report on 5 MW Utility-Owned Large Solar Photovoltaic Systems: World Market Segmentation by City by Icon Group International (Author) This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a "borderless world", cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market. In performing various economic analyses for its clients, I have been occasionally asked... |
 |
The Solar Electricity Handbook 2009: A Simple, Practical Guide to Using Electric Solar Panels and Designing and Installing Photovoltaic Solar PV Systems by Michael Boxwell (Author) The Solar Electricity Handbook is a practical and straightforward guide to using electric solar panels. Assuming no previous knowledge of solar panels, the book explains how solar panels work, how they can be used and explains the steps you need to take to successfully design and install a solar electric system from scratch using photovoltaic solar panels. Accompanying this book is a solar resource website containing lots of useful information, lists of suppliers and on-line solar energy calculators that will simplify the cost analysis and design processes. Why buy the Solar Electricity Handbook? * The Handbook is a simple, practical guide to using electric photovoltaic panels. |
 |
A Practical Guide to Solar Photovoltaic Systems for Technicians: Sizing, Installation and Maintenance by Jean-Paul Louineau (Author) An ideal addition to the toolkit of anyone involved in the installation of solar powered photovoltaic systems, this practical guide provides step by step explanations of the process by which technicians can estimate the requirements of PV systems and guides the reader through the set-up and running of such systems. Produced in a durable paperback edition and heavily illustrated with photos and charts, the guide is specifically designed for use in the field and has been extensively tested in training centres in Africa and other regions. A list of references to further reading and web resources is also provided. Published in association with ETC Energy/TTP, Netherlands |
 |
40 Watt Solar Power Panel Model GP-40-12 Battery Charger Polycrystalline Photovoltaic by Global Energy LLC The GP-40-12 40 Watt Solar Electric Power Panel features ploy-crystalline photovoltic cell technology. The 36 square solar cells are encapsulated beneath high transmission tempered glass using an advanced, UV resistant thermal setting plastic. The encapsulant ethylene vinyl acetate (EVA) cushions the solar cells within the laminate and ensures the operating characteristics of the solar cells under virtually any climatic conditions. The rear surface of the module is completely sealed from moisture and mechanical damage by a continuous high strength polymer sheet. The glass/tedlar construction of the module minimizes weight while providing a durable, protective environment for the solar cells. APPLICATIONS Grid-Connected Systems: Residential Solar Power Systems Public and Industrial Solar... |
 |
Photovoltaics for Professionals: Solar Electric Systems Marketing, Design and Installation by Falk Antony (Author), Christian Dürschner (Author), Karl-Heinz Remmers (Author) * Provides essential guidance for electricians, technicians, builders, architects and building engineers who want to get involved in this expanding industry. * Describes the practicalities of marketing, designing and installing photovoltaic systems * Contains over 100 full-color illustrations, numerous case studies and examples of best practice The installation of photovoltaic systems has become a new and rapidly expanding field of activity for the building industry as interest in solar energy grows, providing excellent business prospects. Photovoltaics for Professionals describes the practicalities of working with photovoltaics, from marketing and selling photovoltaic products to designing and installing photovoltaic systems (both grid-tied and stand-alone). The book... |
 |
Photovoltaics: Design and Installation Manual by Solar Energy International (Author) Producing electricity from the sun using photovoltaic (PV) systems has become a major industry worldwide. But designing, installing and maintaining such systems requires knowledge and training, and there have been few easily accessible, comprehensive guides to the subject. Now, with Photovoltaics: Design and Installation Manual, a world-class solar energy training and education provider-Solar Energy International (SEI)-has made available the critical information to successfully design, install and maintain PV systems. The book contains an overview of photovoltaic electricity and a detailed description of PV system components, including PV modules, batteries, controllers and inverters. It also includes chapters on sizing photovoltaic systems, analyzing sites and installing PV... |
|
Solar Photovoltaic Systems Technical Training Manual (Solar Photovoltaic Systems: Technical Training Manual and So) by Herbert A. Wode (Author), Herbert A. Wade (Author), Gloria McConnaghy (Illustrator) | |
 |
The 2007-2012 World Outlook for 16 Megawatt Off-Grid Industrial and Commercial Solar Photovoltaic Systems by Philip M. Parker (Author) This study covers the world outlook for 16 megawatt off-grid industrial and commercial solar photovoltaic systems across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term... |
 |
The 2009 Report on 16 Megawatt Off-Grid Industrial and Commercial Solar Photovoltaic Systems: World Market Segmentation by City by Icon Group International (Author) This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a "borderless world", cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market. In performing various economic analyses for its clients, I have been occasionally asked... |
 |
The 2007 Report on 5 MW Utility-Owned Large Solar Photovoltaic Systems: World Market Segmentation by City by Philip M. Parker (Author) This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a “borderless world”, cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market. In performing various economic analyses for its clients, I have been occasionally asked to... |
| © 2009 BrightSurf.com |