Email a Friend
Printer Friendly
Slashdot It!
Submit to Reddit
Add to Facebook

MIT researchers discover new way of producing electricity

March 08, 2010

Phenomenon causes powerful waves of energy to shoot through carbon nanotubes

CAMBRIDGE, Mass. -- A team of scientists at MIT have discovered a previously unknown phenomenon that can cause powerful waves of energy to shoot through minuscule wires known as carbon nanotubes. The discovery could lead to a new way of producing electricity, the researchers say.

The phenomenon, described as thermopower waves, "opens up a new area of energy research, which is rare," says Michael Strano, MIT's Charles and Hilda Roddey Associate Professor of Chemical Engineering, who was the senior author of a paper describing the new findings that appeared in Nature Materials on March 7. The lead author was Wonjoon Choi, a doctoral student in mechanical engineering.

Like a collection of flotsam propelled along the surface by waves traveling across the ocean, it turns out that a thermal wave - a moving pulse of heat - traveling along a microscopic wire can drive electrons along, creating an electrical current.

The key ingredient in the recipe is carbon nanotubes - submicroscopic hollow tubes made of a chicken-wire-like lattice of carbon atoms. These tubes, just a few billionths of a meter (nanometers) in diameter, are part of a family of novel carbon molecules, including buckyballs and graphene sheets, that have been the subject of intensive worldwide research over the last two decades.

In the new experiments, each of these electrically and thermally conductive nanotubes was coated with a layer of a highly reactive fuel that can produce heat by decomposing. This fuel was then ignited at one end of the nanotube using either a laser beam or a high-voltage spark, and the result was a fast-moving thermal wave traveling along the length of the carbon nanotube like a flame speeding along the length of a lit fuse. Heat from the fuel goes into the nanotube where it travels thousands of times faster than in the fuel itself. As the heat feeds back to the fuel coating, a thermal wave is created that is guided along the nanotube. With a temperature of 3,000 kelvins, this ring of heat speads along the tube 10,000 times faster than the normal spread of this chemical reaction. The heating produced by that combustion, it turns out, also pushes electrons along the tube, creating a substantial electrical current.

Combustion waves - like this pulse of heat hurtling along a wire - "have been studied mathematically for more than 100 years," Strano says, but he was the first to predict that such waves could be guided by a nanotube or nanowire and that this wave of heat could push an electrical current along that wire.

In the group's initial experiments, Strano says, when they wired up the carbon nanotubes with their fuel coating in order to study the reaction, "lo and behold, we were really surprised by the size of the resulting voltage peak" that propagated along the wire.

After further development, the system now puts out energy, in proportion to its weight, about 100 times greater than an equivalent weight of lithium-ion battery.

The amount of power released, he says, is much greater than that predicted by thermoelectric calculations. While many semiconductor materials can produce an electric potential when heated, through something called the Seebeck effect, that effect is very weak in carbon. "There's something else happening here," he says. "We call it electron entrainment since part of the current appears to scale with wave velocity."

The thermal wave, he explains, appears to be entraining the electrical charge carriers (either electrons or electron holes) just as an ocean wave can pick up and carry a collection of debris along the surface. This important property is responsible for the high power produced by the system, Strano says.

Because this is such a new discovery, he says, it's hard to predict yet exactly what the practical applications will be. But he suggests that one possible application would be in enabling new kinds of ultra-small electronic devices - for example, a devices the size of grains of rice, perhaps a sensor or treatment device that could be injected into the body. Or it could lead to "environmental sensors that could be scattered like dust in the air," he says.

In theory, he says, such devices could maintain their power indefinitely until used, unlike batteries whose charge leaks away gradually as they sit unused. And while the individual nanowires are tiny, Strano suggests that they could be made in large arrays in order to supply significant amounts of power for larger devices.

One area the researchers plan to pursue is the fact that their theory predicts that using different kinds of reactive materials for the coating, the wave front could oscillate, thus producing an alternating current. That opens up a variety of possibilities, Strano says, because alternating current is the basis for radio waves such as cell phone transmissions, but present energy-storage systems all produce direct current. "Our theory predicted these oscillations before we began to observe them in our data," he says.

Also, the present versions of the system have low efficiency, because much power is being given off as heat and light. The team plans to work on improving that efficiency.

Massachusetts Institute of Technology

Related Carbon Nanotubes Current Events and Carbon Nanotubes News Articles

Carbon Nanotubes Current Events and Carbon Nanotubes News RSS

Nanotechnology for water purification
Nanotechnology refers to a broad range of tools, techniques and applications that simply involve particles on the approximate size scale of a few to hundreds of nanometers in diameter.

Nanoblasts from laser-activated nanoparticles move molecules, proteins and DNA into cells
Using chemical "nanoblasts" that punch tiny holes in the protective membranes of cells, researchers have demonstrated a new technique for getting therapeutic small molecules, proteins and DNA directly into living cells.

Nanowick at heart of new system to cool 'power electronics'
Researchers have shown that an advanced cooling technology being developed for high-power electronics in military and automotive systems is capable of handling roughly 10 times the heat generated by conventional computer chips.

Nanoribbons for graphene transistors
In the recent issue of Nature, scientists from Empa and the Max Planck Institute for Polymer Research report how they have managed for the first time to grow graphene ribbons that are just a few nanometres wide using a simple surface-based chemical method.

Researchers use nanoparticles as destructive beacons to zap tumors
A group of researchers from Wake Forest University Baptist Medical Center (WFUBMC) is developing a way to treat cancer by using lasers to light up tiny nanoparticles and destroy tumors with the ensuing heat.

Nanotubes pass acid test
Rice University scientists have found the "ultimate" solvent for all kinds of carbon nanotubes (CNTs), a breakthrough that brings the creation of a highly conductive quantum nanowire ever closer.

Magnets trump metallics
Metallic carbon nanotubes show great promise for applications from microelectronics to power lines because of their ballistic transmission of electrons. But who knew magnets could stop those electrons in their tracks?

Carbon nanotubes form ultrasensitive biosensor to detect proteins
A cluster of carbon nanotubes coated with a thin layer of protein-recognizing polymer form a biosensor capable of using electrochemical signals to detect minute amounts of proteins, which could provide a crucial new diagnostic tool for the detection of a range of illnesses, a team of Boston College researchers report in the journal Nature Nanotechnology.

Depth Charge: Using Atomic Force Microscopy to Study Subsurface Structures
Over the past couple of decades, atomic force microscopy (AFM) has emerged as a powerful tool for imaging surfaces at astonishing resolutions-fractions of a nanometer in some cases.

Researchers at Rensselaer Polytechnic Institute Develop New Method for Mass-Producing Graphene
Researchers at Rensselaer Polytechnic Institute have developed a simple new method for producing large quantities of the promising nanomaterial graphene. The new technique works at room temperature, needs little processing, and paves the way for cost-effective mass production of graphene.

More Carbon Nanotubes Current Events and Carbon Nanotubes News Articles

	Carbon Nanotube Science: Synthesis, Properties and Applications by Peter J. F. Harris (Author) Carbon nanotubes represent one of the most exciting research areas in modern science. These molecular-scale carbon tubes are the stiffest and strongest fibres known, with remarkable electronic properties, and potential applications in a wide range of fields. Carbon Nanotube Science is the most concise, accessible book for the field, presenting the basic knowledge that graduates and researchers need to know. Based on the successful Carbon Nanotubes and Related Structures, this new book focuses solely on carbon nanotubes, covering the major advances made in recent years in this rapidly developing field. Chapters focus on electronic properties, chemical and bimolecular functionalisation, nanotube composites and nanotube-based probes and sensors. The book begins with a comprehensive...
	Physical Properties of Carbon Nanotubes by R. Saito (Author) This text is intended for researchers who want to perform theoretical analysis of carbon nanotubes. It can be used by graduate students in a solid state physics to learn how to investigate the structure of carbon nanotubes, its electronic and vibrational properties.
	Physics of Carbon Nanotube Devices by William Andrew This book provides insights into modern grinding technology based on wide research and experience. It provides a concise treatment of the principles involved and shows how these lead on to the latest technology developments. The reader learns how to achieve high precision, fast removal rates, and reduced costs. Every aspect of the grinding process and machine comes under the searchlight to show step improvements. Superb grinding machines now produce optical quality finishes due to developments in process control and machine design. It is the same for extremely high removal rates. This book shows how best quality can be improved and costs brought down at the same time as output is increased. The book is aimed at practitioners, engineers, researchers, students, and teachers. The...
	Easton MonkeyLite XC CNT Carbon Fiber MTB Riser Bicycle Handlebar (685mm Wide, 20mm Rise) by Easton Low and high rise (8° sweep \| 4° upsweep)
	Carbon Nanotubes: Properties and Applications by Michael J. OConnell (Author) Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the...
	Carbon Nanotubes: Advanced Topics in the Synthesis, Structure, Properties and Applications (Topics in Applied Physics) by Springer The carbon nanotubes field has evolved substantially since the publication of the bestseller Carbon Nanotubes: Synthesis, Structure, Properties and Applications . The present volume builds on the generic aspects of the aforementioned book, which emphasizes the fundamentals, with the new volume emphasizing areas that have grown rapidly since the first volume, guiding future directions where research is needed and highlighting applications. The volume also includes an emphasis on areas like graphene, other carbon-like and other tube-like materials because these fields are likely to affect and influence developments in nanotubes in the next 5 years.
	Carbon Nanotubes: Basic Concepts and Physical Properties by Stephanie Reich (Author), Christian Thomsen (Author), Janina Maultzsch (Author) Carbon nanotubes are exceptionally interesting from a fundamental research point of view. Many concepts of one-dimensional physics have been verified experimentally such as electron and phonon confinement or the one-dimensional singularities in the density of states; other 1D signatures are still under debate, such as Luttinger-liquid behavior. Carbon nanotubes are chemically stable, mechanically very strong, and conduct electricity. For this reason, they open up new perspectives for various applications, such as nano-transistors in circuits, field-emission displays, artificial muscles, or added reinforcements in alloys. This text is an introduction to the physical concepts needed for investigating carbon nanotubes and other one-dimensional solid-state systems. Written for...
	Carbon Nanotubes: Advanced Topics in the Synthesis, Structure, Properties and Applications (Topics in Applied Physics) by Ado Jorio (Author), Ado Jorio (Editor), Gene Dresselhaus (Editor), Mildred S. Dresselhaus (Editor) The carbon nanotubes field has evolved substantially since the publication of the bestseller Carbon Nanotubes: Synthesis, Structure, Properties and Applications . The present volume builds on the generic aspects of the aforementioned book, which emphasizes the fundamentals, with the new volume emphasizing areas that have grown rapidly since the first volume, guiding future directions where research is needed and highlighting applications. The volume also includes an emphasis on areas like graphene, other carbon-like and other tube-like materials because these fields are likely to affect and influence developments in nanotubes in the next 5 years.
	Easton MonkeyLite DH CNT Carbon Fiber MTB Riser Bicycle Handlebar (31.8mm Diameter, 711mm Wide, 40mm Rise) by Easton New carbon unidirectional design
	Carbon Nanotubes: Science and Applications by CRC Press No description available