A mineral way to catalysis?

February 13, 2012

Fool's gold may prove an unlikely alternative to overexploited catalytic materials

Catalytic materials, which lower the energy barriers for chemical reactions, are used in everything from the commercial production of chemicals to catalytic converters in car engines. However, with current catalytic materials becoming increasingly expensive, scientists are exploring viable alternatives.

Researchers at the University of Cambridge have now discovered that the sulphide material iron pyrite, commonly known as 'Fool's Gold', may hold the answer. Their findings were published online today, 10 February, in Physical Chemistry Chemical Physics.

In the past, sulphur was believed to be one of the most detrimental elements for surface chemical reactions, able to decrease dramatically the reactivity of a catalyst by occupying (poisoning) the "active sites" on the material, but more recently some sulphur materials (for example, molybdenum sulphides) have actually shown interesting catalytic properties of their own.

Using state-of-the-art electronic structure calculations, researchers led by Stephen Jenkins at the University's Department of Chemistry, explored the potential catalytic activity of iron pyrite, the most abundant sulphur mineral on Earth. In their study, the Cambridge researchers focused on the reactions between iron pyrite and nitrogen oxides (NOx), an extremely poisonous class of compounds produced (among other sources) by car engines and industrial power plants.

Dr Marco Sacchi, the first author on the paper, said: "Recent European legislation has proposed increasingly strict legislative limits on the concentration of NOx that can be emitted by vehicles; therefore the search for new and more efficient catalysts that can capture these molecules and transform them into innocuous gases such as nitrogen and water vapour, is urgently relevant."

Developing new catalysts derived from inexpensive minerals, instead of increasingly costly (and rare) precious metals, is an important area of research that involves several groups around the world. The next steps for the Cambridge researchers will be to investigate the activity of pyrite surfaces for strategically important industrial reactions, such as the manufacture of ammonia for fertilisers, the production of synthetic hydrocarbon fuels from renewable biomass, and the extraction of hydrogen for use in future fuel cell electric vehicles.

Dr Sacchi added: "The necessity of finding reliable alternatives to overexploited catalytic materials - such as platinum, rhodium and gold - will soon become unavoidable. Experimental work is currently underway in our group, and we hope that our work will ultimately allow us to test the potential for catalytic application of a wide range of sulphidic and carbidic materials. In future, we aim to develop fruitful scientific collaborations with chemical engineering groups and with industrial partners."

University of Cambridge

Catalysis by Ceria and Related Materials (Catalytic Science Series)
by Alessandro Trovarelli (Author)

The use of CeO2-based materials in catalysis has attracted considerable attention in recent years, particularly in applications like environmental catalysis, where ceria has shown great potential. This volume critically reviews advances in the field, with the focus on both fundamental and applied issues. The first few chapters cover structural and chemical properties of ceria and related materials, such as phase stability, reduction behaviour, synthesis, interaction with probe molecules (CO, O2, NO), and metal-support interaction - all presented from the viewpoint of catalytic applications. The use of computational techniques and ceria surfaces and films for model catalytic studies are also reviewed. The second part of the work provides a critical evaluation of the role of ceria in the...

Advances in New Catalytic Materials: Selected, Peer Reviewed Papers from the Second International Symposium on New Catalytic Materials, Cancun, Mexico, 16-20 August, 2009 (Advanced Materials Research)
by Jin-An, Dr. Wang (Editor), Cao, Dr. Guozhong (Editor), Jose Manuel Dominguez (Editor)

Synthesis and Properties of Advanced Catalytic Materials: Symposium Held November 29-December 1, 1994, Boston, Massachusetts, U.S.A (Materials Research Society Symposium Proceedings)
by Enrique Iglesia (Editor), Peter W. Lednor (Editor), Dick A. Nagaki (Editor), Levi T. Thompson (Editor)

Advanced Catalytic Materials - 1996: Volume 454 (MRS Proceedings)
by D. A. Nagaki (Author), L. T. Thompson (Author), P. W. Lednor (Editor), M. J. Ledoux (Editor)

Efforts to develop new, highly active and selective catalytic materials benefit significantly from the interface between materials science and catalysis. To that end, materials scientists, chemists, chemical engineers, physicists and theorists from around the world come together in this book to discuss not the application of known catalysts to new reactions, but rather to explore new catalytic materials. These new materials continue to yield improvements in the selectivity, energy efficiency, and reliability of refining, petrochemical and chemical processes. Catalysts are also increasingly used to solve environmental problems. All papers in the book were peer-reviewed and are grouped by topic. The focus moves from classes of materials to nanostructure control and modification, to...

Recent Advances in Catalytic Materials: Volume 497 (MRS Proceedings)
by J. Hrbek (Editor), N. M. Rodriguez (Editor), S. L. Soled (Editor)

Heterogeneous catalysis is undergoing a dramatic change driven by the need to develop more efficient catalyst systems for the production of specialty chemicals and the development of new high-tech materials. The traditional concept of a catalyst system consisting of finely divided metal particles dispersed on an inert amorphous ceramic support has encountered increased challenges. The chemical and physical phenomena that occur at the metal particle/support interface are looked at together with the detailed structural and crystallographic features of both components. Also of interest is the study of catalytic materials and the notion that the electronic properties of the substrate can be of extreme importance since they can influence not only the activity, but also the selectivity, of the...

Advanced Catalytic Materials - 1998: Volume 549 (MRS Proceedings)
by P. W. Lednor (Editor), D. A. Nagaki (Editor), L. T. Thompson (Editor)

Progress in materials science and engineering continues to have a significant impact on the development of new or improved catalysts, in particular in the areas of synthesis, manufacture, characterization and shaping. Catalysts, in turn, are of crucial importance in increasing the selectivity and energy efficiency of the many conversion processes used in the oil refining, petrochemical, natural gas and fine-chemical industries. In addition, catalysts play an important role in solving environmental problems. This volume focuses on advanced materials for catalysis and provides a multidisciplinary forum for chemists, chemical engineers, materials scientists, physicists and theorists to present and discuss the results in the field. Emphasis is on advanced catalytic materials rather than the...

Characterization of Catalytic Materials (Materials Characterization)
by Israel E. Wachs (Author)

Catalytic materials are essential to nearly every commercial and industrial chemical process in order to make reaction times faster and more efficient. Understanding the microstructure of such materials is essential to designing improved catalytic propert

Catalytic Methods in Asymmetric Synthesis: Advanced Materials, Techniques, and Applications
by Michelangelo Gruttadauria (Editor), Francesco Giacalone (Editor)

This book covers advances in the methods of catalytic asymmetric synthesis and their applications. Coverage moves from new materials and technologies to homogeneous metal-free catalysts and homogeneous metal catalysts. The applications of several methodologies for the synthesis of biologically active molecules are discussed. Part I addresses recent advances in new materials and technologies such as supported catalysts, supports, self-supported catalysts, chiral ionic liquids, supercritical fluids, flow reactors and microwaves related to asymmetric catalysis. Part II covers advances and milestones in organocatalytic, enzymatic and metal-based mediated asymmetric synthesis, including applications for the synthesis of biologically active molecules. Written by leading international experts,...

Fluid Catalytic Cracking VII:, Volume 166: Materials, Methods and Process Innovations (Studies in Surface Science and Catalysis) (v. 7)
by Mario L. Occelli (Editor)

Since 1987, the Petroleum Division of the American Chemical Society (ACS) has sponsored at 3 year intervals an international symposium on fluid cracking catalysts (FCC) technology. This volume collects the recent progress of this technology as reported in the papers presented during the 232th National Meeting of the ACS in San Francisco, September 10-14, 2006.
Sixty-six years after the introduction of the fluid cracking catalyst process, it remains the main process of gasoline generation for the estimated 237 millions cars on US roads. Catalysts testing and evaluation still remains a subject of interest, debate and controversy. Lambda sweep testing, testing of SOx, NOx and combustion promoters have been discussed in details together with catalyst evaluation for atmospheric residues and...

Carbon Materials for Catalysis
by Philippe Serp (Editor), José Luis Figueiredo (Editor)

This is the first comprehensive book covering all aspects of the use of carbonaceous materials in heterogeneous catalysis. It covers the preparation and characterization of carbon supports and carbon-supported catalysts; carbon surface chemistry in catalysis; the description of catalytic, photo-catalytic, or electro-catalytic reactions, including the development of new carbon materials such as carbon xerogels, aerogels, or carbon nanotubes; and new carbon-based materials in catalytic or adsorption processes. This is a premier reference for carbon, inorganic, and physical chemists, materials scientists and engineers, chemical engineers, and others.