Nav: Home

Sandia forms Spray Combustion Consortium to improve engine design

January 03, 2017

LIVERMORE, Calif. - Sandia National Laboratories has formed an industry-funded Spray Combustion Consortium to better understand fuel injection by developing modeling tools. Control of fuel sprays is key to the development of clean, affordable fuel-efficient engines.

Consortium participants include Sandia and Argonne national laboratories, the University of Massachusetts at Amherst, Toyota Motor Corp., Renault, Convergent Science, Cummins, Hino Motors, Isuzu and Ford Motor Co. Data, understanding of the critical physical processes involved and initial computer model formulations are being developed and provided to all participants.

Sandia researcher Lyle Pickett, who serves as Sandia's lead for the consortium, said predictive spray modeling is critical in the development of advanced engines.

"Most pathways to higher engine efficiency rely on fuel injection directly into the engine cylinder," Pickett said. "While industry is moving toward improved direct-injection strategies, they often encounter uncertainties associated with fuel injection equipment and in-cylinder mixing driven by fuel sprays. Characterizing fuel injector performance for all operating conditions becomes a time-consuming and expensive proposition that seriously hinders engine development."

Industry has consequently identified predictive models for fuel sprays as a high research priority supporting the development and optimization of higher-efficiency engines. Sprays affect fuel-air mixing, combustion and emission formation processes in the engine cylinder; understanding and modeling the spray requires detailed knowledge about flow within the fuel injector nozzle as well as the dispersion of liquid outside of the nozzle. However, nozzle flow processes are poorly understood and quantitative data for model development and validation are extremely sparse.

"The Office of Energy Efficiency and Renewable Energy Vehicle Technologies Office supports the unique research facility utilized by the consortium to elucidate sprays and also supports scientists at Sandia in performing experiments and developing predictive models that will enable industry to bring more efficient engines to market," said Gurpreet Singh, program manager at the DOE's Vehicle Technologies Office.

Consortium participants already are conducting several experiments using different nozzle shapes, transparent and metal nozzles and gasoline and diesel type fuels. The experiments provide quantitative data and a better understanding of the critical physics of internal nozzle flows, using advanced techniques like high-speed optical microscopy, X-ray radiography and phase-contrast imaging.

The experiments and detailed simulations of the internal flow, cavitation, flash-boiling and liquid breakup processes are used as validation information for engineering-level modeling that is ultimately used by software vendors and industry for the design and control of fuel injection equipment.

The goals of the research are to reveal the physics that are general to all injectors and to develop predictive spray models that will ultimately be used for combustion design.

"Predictive spray modeling is a critical part of achieving accurate simulations of direct injection engines," said Kelly Senecal, co-founder of Convergent Science. "As a software vendor specializing in computational fluid dynamics of reactive flows, the knowledge gained from the data produced by the consortium is invaluable to our future code-development efforts."

Consortium participants meet on a quarterly basis where information is shared and updates are provided.

"The consortium addresses a critical need impacting the design and optimization of direct injection engines," Pickett said. "The deliverables of the consortium will offer a distinct competitive advantage to both engine companies and software vendors."
Sandia National Laboratories is a multi-mission laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corp., for the U.S. Department of Energy's National Nuclear Security Administration. With main facilities in Albuquerque, N.M., and Livermore, Calif., Sandia has major R&D responsibilities in national security, energy and environmental technologies and economic competitiveness.

DOE/Sandia National Laboratories

Related Combustion Articles:

Engines fire without smoke
Car manufacturers could clean up vehicle exhausts using a new model of gasoline combustion developed using experimental data.
Sandia forms Spray Combustion Consortium to improve engine design
Sandia National Laboratories has formed an industry-funded Spray Combustion Consortium to better understand fuel injection by developing modeling tools.
The promise of greener power generation
The characterization of compounds produced in combustion could lead to cleaner, more efficient power stations.
New In-Situ Combustion advancements researched by Kazan University
New results in in-situ combustion technologies have been achieved at the In-Situ Combustion Lab of Kazan Federal University.
Newly discovered 'blue whirl' fire tornado burns cleaner for reduced emissions
University of Maryland researchers say their discovery of a type of fire tornado they call a 'blue whirl' could lead to beneficial new approaches for reduced carbon emissions and improved oil spill cleanup.
Fossil fuel combustion endangers children's health in two significant ways: A scientist reviews the evidence
Writing in a commentary in Environmental Health Perspectives, Frederica Perera, director of the Columbia Center for Children's Environmental Health (CCCEH), identifies fossil fuel combustion and associated air pollution and carbon dioxide (CO2) as the root cause of much of the ill health of children today.
Better combustion for power generation
As US utility companies replace coal-fired power plants with natural gas, a collaboration between GE and Oak Ridge National Laboratory is contributing to efficiency gains in GE's H-class gas turbines.
Global data shows inverse relationship, shift in human use of fire
Humans use fire for heating, cooking, managing lands and, more recently, fueling industrial processes.
Catalysts for heavy oil extraction developed at Kazan University
The catalysts speed up heavy oil extraction under the conditions of in-situ combustion.
Jumping robots blend the best of both worlds
Researchers have designed a more efficient jumping robot with three-dimensional (3-D) printing techniques and a combination of hard and soft materials.

Related Combustion Reading:

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Climate Crisis
There's no greater threat to humanity than climate change. What can we do to stop the worst consequences? This hour, TED speakers explore how we can save our planet and whether we can do it in time. Guests include climate activist Greta Thunberg, chemical engineer Jennifer Wilcox, research scientist Sean Davis, food innovator Bruce Friedrich, and psychologist Per Espen Stoknes.
Now Playing: Science for the People

#527 Honey I CRISPR'd the Kids
This week we're coming to you from Awesome Con in Washington, D.C. There, host Bethany Brookshire led a panel of three amazing guests to talk about the promise and perils of CRISPR, and what happens now that CRISPR babies have (maybe?) been born. Featuring science writer Tina Saey, molecular biologist Anne Simon, and bioethicist Alan Regenberg. A Nobel Prize winner argues banning CRISPR babies won’t work Geneticists push for a 5-year global ban on gene-edited babies A CRISPR spin-off causes unintended typos in DNA News of the first gene-edited babies ignited a firestorm The researcher who created CRISPR twins defends...