Eye-catching electronics

January 09, 2014

Niko Münzenrieder submerges a ficus leaf in water containing pieces of a shiny metallic membrane. Using tweezers, he carefully moves one of these pieces on to the leaf of the houseplant. On lifting the leaf, the film sticks to it like glue. The post-doctoral researcher is demonstrating the special characteristics of this electronic component in the form of an ultra-thin membrane, which he has helped to develop. "These new thin-film transistors adhere to a wide range of surfaces and adapt perfectly," explains the physicist.

In Professor Gerhard Tröster's Electronics Lab, scientists have been researching flexible electronic components, such as transistors and sensors, for some time now. The aim is to weave these types of components into textiles or apply them to the skin in order to make objects 'smart', or develop unobtrusive, comfortable sensors that can monitor various functions of the body.

Supple but functional

The researchers have now taken a big step towards this goal and their work has recently been published in the journal Nature Communications. With this new form of thin-film technology, they have created a very flexible and functional electronics. Within a year, Münzenrieder, together with Giovanni Salvatore, has developed a procedure to fabricate these thin-film components. The membrane consists of the polymer parylene, which the researchers evaporate layer by layer into a conventional two-inch wafer. The parylene film has a maximum thickness of 0.001 mm, making it 50 times thinner than a human hair. In subsequent steps, they used standardised methods to build transistors and sensors from semiconductor materials, such as indium gallium zinc oxide, and conductors, such as gold. The researchers then released the parylene film with its attached electronic components from the wafer.

An electronic component fabricated in this way is extremely flexible, adaptable and - depending on the material used for the transistors - transparent. The researchers confirmed the theoretically determined bending radius of 50 micrometers during experiments in which they placed the electronic membrane on human hair and found that the membrane wrapped itself around the hair with perfect conformability. The transistors, which are less flexible than the substrate due to the ceramic materials used in their construction, still worked perfectly despite the strong bend.

Smart contact lens measures intraocular pressure

Münzenrieder and Salvatore see 'smart' contact lenses as a potential area of application for their flexible electronics. In the initial tests, the researchers attached the thin-film transistors, along with strain gauges, to standard contact lenses. They placed these on an artificial eye and were able to examine whether the membrane, and particularly the electronics, could withstand the bending radius of the eye and continue to function. The tests showed, in fact, that this type of smart contact lens could be used to measure intraocular pressure, a key risk factor in the development of glaucoma.

However, the researchers must still overcome a few technical obstacles before a commercially viable solution can be considered. For instance, the way in which the electronics are attached to the contact lens has to be optimised to take into account the effects of the aqueous ocular environment. In addition, sensors and transistors require energy, albeit only a small amount, which currently has to be provided from an external source. "In the lab, the film can be easily connected to the energy supply under a microscope. However, a different solution would need to be found for a unit attached to the actual eye," says Münzenrieder.

Professor Tröster's laboratory has already attracted attention in the past with some unusual ideas for wearable electronics. For example, the researchers have developed textiles with electronic components woven into them and they have also used sensors to monitor the bodily functions of Swiss ski jumping star Simon Ammann during his jumps.
-end-
Reference

Salvatore GA, Münzenrieder N, Kinkeldei T, Petti L, Zysset C, Strebel I, Büthe L & Tröster G. Wafer-scale design of lightweight and transparent eletronics that wraps around hairs. Nature Communications, published online 7th January 2014. doi: 10.1038/ncomms3982

ETH Zurich

Related Contact Lenses Articles from Brightsurf:

Contact lenses for diagnostic and therapeutic use
A collaborative team, which includes a group from the Terasaki Institute for Biomedical Innovation, has developed a fabrication method to meet all the challenges in making a hydrogel contact lens for biomarker sensing.

Graphene microbubbles make perfect lenses
Jia and fellow researchers from Swinburne University of Technology recently teamed up with researchers from National University of Singapore, Rutgers University, University of Melbourne, and Monash University, to develop a method to generate precisely controlled graphene microbubbles on a glass surface using laser pulses.

Multifocal contact lenses slow myopia progression in children
Children wearing multifocal contact lenses had slower progression of their myopia, according to results from a clinical trial funded by the National Eye Institute, part of the National Institutes of Health.

Young nearsighted kids benefit from bifocal contact lenses, study shows
Bifocal contact lenses aren't just for aging eyes anymore. In nearsighted kids as young as 7 years old, multifocal contact lenses with a heavy dose of added reading power can dramatically slow further progression of myopia, new research has found.

Spider silk can create lenses useful for biological imaging
Spider silk is useful for a variety of biomedical applications: It exhibits mechanical properties superior to synthetic fibers for tissue engineering, and it is not toxic or harmful to living cells.

Ultra-thin camera lenses of the future could see the light of day
In the future, camera lenses could be thousands of times thinner and significantly less resource-intensive to manufacture.

What do ants and light rays have in common when they pass through lenses?
Foraging trails of ants across a lens-shaped substrate that slows them (Velcro) down diverge away from the ''lens'' center more for the convex than for the concave lens, similar to the behavior of light.

Seeing the universe through new lenses
A new study by an international team of scientists revealed hundreds of new strong gravitational lensing candidates based on a deep dive into data collected for a US Department of Energy-supported telescope project in Arizona called the Dark Energy Spectroscopic Instrument.

Smart contact lenses that diagnose and treat diabetes
Professor Sei Kwang Hahn's team at POSTECH develops wireless smart contact lenses for diagnosis and treatment of diabetes

High-tech contact lenses correct color blindness
Researchers have incorporated ultra-thin optical devices known as metasurfaces into off-the-shelf contact lenses to correct deuteranomaly, a form of red-green color blindness.

Read More: Contact Lenses News and Contact Lenses Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.