Rice model offers help for new hips

January 11, 2021

HOUSTON - (Jan. 11, 2021) - Rice University engineers hope to make life better for those with replacement joints by modeling how artificial hips are likely to rub them the wrong way.

The computational study by the Brown School of Engineering lab of mechanical engineer Fred Higgs simulates and tracks how hips evolve, uniquely incorporating fluid dynamics and roughness of the joint surfaces as well as factors clinicians typically use to predict how well implants will stand up over their expected 15-year lifetime.

The team's immediate goal is to advance the design of more robust prostheses.

Ultimately, they say the model could help clinicians personalize hip joints for patients depending on gender, weight, age and gait variations.

Higgs and co-lead authors Nia Christian, a Rice graduate student, and Gagan Srivastava, a mechanical engineering lecturer at Rice and now a research scientist at Dow Chemical, reported their results in Biotribology.

The researchers saw a need to look beyond the limitations of earlier mechanical studies and standard clinical practices that use simple walking as a baseline to evaluate artificial hips without incorporating higher-impact activities.

"When we talk to surgeons, they tell us a lot of their decisions are based on their wealth of experience," Christian said. "But some have expressed a desire for better diagnostic tools to predict how long an implant is going to last.

"Fifteen years sounds like a long time but if you need to put an artificial hip into someone who's young and active, you want it to last longer so they don't have multiple surgeries," she said.

Higgs' Particle Flow and Tribology Lab was invited by Rice mechanical and bioengineer B.J. Fregly, to collaborate on his work to model human motion to improve life for patients with neurologic and orthopedic impairments.

"He wanted to know if we could predict how long their best candidate hip joints would last," said Higgs, Rice's John and Ann Doerr Professor in Mechanical Engineering and a joint professor of Bioengineering, whose own father's knee replacement partially inspired the study. "So our model uses walking motion of real patients."

Physical simulators need to run millions of cycles to predict wear and failure points, and can take months to get results. Higgs' model seeks to speed up and simplify the process by analyzing real motion capture data like that produced by the Fregly lab along with data from "instrumented" hip implants studied by Georg Bergmann at the Free University of Berlin.

The new study incorporates the four distinct modes of physics -- contact mechanics, fluid dynamics, wear and particle dynamics -- at play in hip motion. No previous studies considered all four simultaneously, according to the researchers.

One issue others didn't consider was the changing makeup of the lubricant between bones. Natural joints contain synovial fluid, an extracellular liquid with a consistency similar to egg whites and secreted by the synovial membrane, connective tissue that lines the joint. When a hip is replaced, the membrane is preserved and continues to express the fluid.

"In healthy natural joints, the fluid generates enough pressure so that you don't have contact, so we all walk without pain," Higgs said. "But an artificial hip joint generally undergoes partial contact, which increasingly wears and deteriorates your implanted joint over time. We call this kind of rubbing mixed lubrication."

That rubbing can lead to increased generation of wear debris, especially from the plastic material -- an ultrahigh molecular weight polyethylene -- commonly used as the socket (the acetabular cup) in artificial joints. These particles, estimated at up to 5 microns in size, mix with the synovial fluid can sometimes escape the joint.

"Eventually, they can loosen the implant or cause the surrounding tissue to break down," Christian said. "And they often get carried to other parts of the body, where they can cause osteolysis. There's a lot of debate over where they end up but you want to avoid having them irritate the rest of your body."

She noted the use of metal sockets rather than plastic is a topic of interest. "There's been a strong push toward metal-on-metal hips because metal is durable," Christian said. "But some of these cause metal shavings to break off. As they build up over time, they seem to be much more damaging than polyethylene particles."

Further inspiration for the new study came from two previous works by Higgs and colleagues that had nothing to do with bioengineering. The first looked at chemical mechanical polishing of semiconductor wafers used in integrated circuit manufacturing. The second pushed their predictive modeling from micro-scale to full wafer-scale interfaces.

The researchers noted future iterations of the model will incorporate more novel materials being used in joint replacement.
-end-
Philip and Marsha Dowd and the Cancer Prevention and Research Institute of Texas (CPRIT) supported the research. Higgs is also Rice's vice provost for academic affairs and faculty director of the Rice Center for Engineering Leadership.

Read the abstract at https://doi.org/10.1016/j.biotri.2020.100156

This news release can be found online at https://news.rice.edu/2021/01/11/rice-model-offers-help-for-new-hips/

Follow Rice News and Media Relations via Twitter @RiceUNews

Related materials:

Particle Flow & Tribology Lab (Higgs group): https://higgslab.org

Department of Mechanical Engineering: https://mech.rice.edu

Department of Bioengineering: https://bioengineering.rice.edu

George R. Brown School of Engineering: https://engineering.rice.edu

Images for download:

https://news-network.rice.edu/news/files/2021/01/0111_HIP-1-web.jpg

Rice University engineers have designed a computational model that will ultimately serve as the engine to predict how long a hip implant could last for a specific patient. It incorporates fluid dynamics and the physics of implant wear and aims to streamline trial-and-error in the design of future implants. (Credit: Wikipedia)

https://news-network.rice.edu/news/files/2021/01/0111_HIP-3-web.jpg

CAPTION: Fred Higgs. (Credit: Rice University)

https://news-network.rice.edu/news/files/2021/01/0111_HIP-4-web.jpg

CAPTION: Nia Christian. (Credit: Duke Pratt)

https://news-network.rice.edu/news/files/2021/01/0111_HIP-5-web.jpg

CAPTION: Gagan Srivastava. (Credit: Rice University)

Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation's top 20 universities by U.S. News & World Report. Rice has highly respected schools of Architecture, Business, Continuing Studies, Engineering, Humanities, Music, Natural Sciences and Social Sciences and is home to the Baker Institute for Public Policy. With 3,978 undergraduates and 3,192 graduate students, Rice's undergraduate student-to-faculty ratio is just under 6-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice is ranked No. 1 for lots of race/class interaction and No. 1 for quality of life by the Princeton Review. Rice is also rated as a best value among private universities by Kiplinger's Personal Finance.

Rice University

Related Rice Articles from Brightsurf:

C4 rice's first wobbly steps towards reality
An international long-term research collaboration aimed at creating high yielding and water use efficient rice varieties, has successfully installed part of the photosynthetic machinery from maize into rice.

Rice has many fathers but only two mothers
University of Queensland scientists studied more than 3000 rice genotypes and found diversity was inherited through two maternal genomes identified in all rice varieties.

Rice rolls out next-gen nanocars
Rice University researchers continue to advance the science of single-molecule machines with a new lineup of nanocars, in anticipation of the next international Nanocar Race in 2022.

3D camera earns its stripes at Rice
The Hyperspectral Stripe Projector captures spectroscopic and 3D imaging data for applications like machine vision, crop monitoring, self-driving cars and corrosion detection.

Climate change could increase rice yields
Research reveals how rice ratooning practices can help Japanese farmers increase rice yields.

Breeding new rice varieties will help farmers in Asia
New research shows enormous potential for developing improved short-duration rice varieties.

High-protein rice brings value, nutrition
A new advanced line of rice, with higher yield, is ready for final field testing prior to release.

Rice plants engineered to be better at photosynthesis make more rice
A new bioengineering approach for boosting photosynthesis in rice plants could increase grain yield by up to 27 percent, according to a study publishing January 10, 2019 in the journal Molecular Plant.

Can rice filter water from ag fields?
While it's an important part of our diets, new research shows that rice plants can be used in a different way, too: to clean runoff from farms before it gets into rivers, lakes, and streams.

Rice plants evolve to adapt to flooding
Although water is essential for plant growth, excessive amounts can waterlog and kill a plant.

Read More: Rice News and Rice Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.