Nav: Home

Next generation photonic memory devices are light-written, ultrafast and energy efficient

January 14, 2019

Light is the most energy-efficient way of moving information. Yet, light shows one big limitation: it is difficult to store. As a matter of fact, data centers rely primarily on magnetic hard drives. However, in these hard drives, information is transferred at an energy cost that is nowadays exploding. Researchers of the Institute of Photonic Integration of the Eindhoven University of Technology (TU/e) have developed a 'hybrid technology' which shows the advantages of both light and magnetic hard drives. Ultra-short (femtosecond) light pulses allows data to be directly written in a magnetic memory in a fast and highly energy-efficient way. Moreover, as soon as the information is written (and stored), it moves forward leaving space to empty memory domains to be filled in with new data. This research, published in Nature Communications, promises to revolutionize the process of data storage in future photonic integrated circuits.

Data are stored in hard drives in the form of 'bits', tiny magnetic domains with a North and a South pole. The direction of these poles ('magnetization'), determines whether the bits contain a digital 0 or a 1. Writing the data is achieved by 'switching' the direction of the magnetization of the associated bits.

Synthetic ferrimagnets

Conventionally, the switching occurs when an external magnetic field is applied, which would force the direction of the poles either up (1) or down (0). Alternatively, switching can be achieved via the application of a short (femtosecond) laser pulse, which is called all-optical switching, and results in a more efficient and much faster storage of data.

Mark Lalieu, PhD candidate at the Applied Physics Department of TU/e: 'All-optical switching for data storage has been known for about a decade. When all-optical switching was first observed in ferromagnetic materials - amongst the most promising materials for magnetic memory devices - this research field gained a great boost'. However, the switching of the magnetization in these materials requires multiple laser pulses and, thus, long data writing times.

Storing data a thousand times faster

Lalieu, under the guidance of Reinoud Lavrijsen and Bert Koopmans, was able to achieve all-optical switching in synthetic ferrimagnets - a material system highly suitable for spintronic data applications - using single femtosecond laser pulses, thus exploiting the high velocity of data writing and reduced energy consumption.

So how does all-optical switching compare to modern magnetic storage technologies? Lalieu: "The switching of the magnetization direction using the single-pulse all-optical switching is in the order of picoseconds, which is about a 100 to 1000 times faster than what is possible with today's technology. Moreover, as the optical information is stored in magnetic bits without the need of energy-costly electronics, it holds enormous potential for future use in photonic integrated circuits."

'On-the-fly' data writing

In addition, Lalieu integrated all-optical switching with the so-called racetrack memory - a magnetic wire through which the data, in the form of magnetic bits, is efficiently transported using an electrical current. In this system, magnetic bits are continuously written using light, and immediately transported along the wire by the electrical current, leaving space to empty magnetic bits and, thus, new data to be stored.

Koopmans: "This 'on the fly' copying of information between light and magnetic racetracks, without any intermediate electronic steps, is like jumping out of a moving high-speed train to another one. From a 'photonic Thalys' to a 'magnetic ICE', without any intermediate stops. You will understand the enormous increase in speed and reduction in energy consumption that can be achieved in this way".

What's next? This research was performed on micrometric wires. In the future, smaller devices in the nanometer scale should be designed for better integration on chips. In addition, working towards the final integration of the photonic memory device, the Physics of Nanostructure group is currently also busy with the investigation on the read-out of the (magnetic) data, which can be done all-optically as well.
-end-
Reference

'Integrating optical switching with spintronics' by M.L.M. Lalieu, R. Lavrijsen and B. Koopmans is published online in Nature Communications. Lalieu is a PhD candidate in the Physics of Nanostructures group of the Department of Applied Physics. Lalieu will defend his PhD thesis on March 11th 2019.

Eindhoven University of Technology

Related Data Storage Articles:

Discrimination, lack of diversity, & societal risks of data mining highlighted in big data
A special issue of Big Data presents a series of insightful articles that focus on Big Data and Social and Technical Trade-Offs.
CWRU researchers find a chemical solution to shrink digital data storage
Chemists at Case Western Reserve University found that commonly used polymer films containing two dyes can optically store data in a quaternary (four-symbol) code, potentially requiring about half as much space as binary code storage.
Journal AAS publishes first data description paper: Data collection and sharing
AAS published its first data description paper on June 8, 2017.
Magnetoelectric memory cell increases energy efficiency for data storage
A team of researchers has now developed a magnetoelectric random access memory (MELRAM) cell that has the potential to increase power efficiency, and thereby decrease heat waste, by orders of magnitude for read operations at room temperature.
New NIST data to aid production and storage of 'fascinating' medication
Amantadine hydrochloride may be the most common medication you've never heard of.
Ultra-thin multilayer film for next-generation data storage and processing
A team of scientists led by Associate Professor Yang Hyunsoo from the Department of Electrical and Computer Engineering at the National University of Singapore's Faculty of Engineering has invented a novel ultra-thin multilayer film which could harness the properties of skyrmions as information carriers for storing and processing data on magnetic media.
73 percent of academics say access to research data helps them in their work; 34 percent do not publish their data
Combining results from bibliometric analyses, a global sample of researcher opinions and case-study interviews, a new report reveals that although the benefits of open research data are well known, in practice, confusion remains within the researcher community around when and how to share research data.
Nanomagnets for future data storage
An international team of researchers led by chemists from ETH Zurich have developed a method for depositing single magnetizable atoms onto a surface.
Stabilizing energy storage
University of Utah and University of Michigan chemists, participating in a US Department of Energy consortium, predict a better future for these types of batteries, called redox flow batteries.
A new perovskite could lead the next generation of data storage
EPFL scientists have developed a new perovskite material with unique properties that can be used to build next-generation hard drives.

Related Data Storage Reading:

Data Storage Networking: Real World Skills for the CompTIA Storage+ Certification and Beyond
by Nigel Poulton (Author)

Software-Defined Data Infrastructure Essentials: Cloud, Converged, and Virtual Fundamental Server Storage I/O Tradecraft
by Greg Schulz (Author)

Holographic Data Storage (Springer Series in Optical Sciences)
by Hans J. Coufal (Editor), Demetri Psaltis (Editor), Glenn T. Sincerbox (Editor), A.M. Glass (Editor), M.J. Cardillo (Editor)

Information Storage and Management: Storing, Managing, and Protecting Digital Information in Classic, Virtualized, and Cloud Environments
by EMC Education Services (Editor)

Cloud and Virtual Data Storage Networking
by Greg Schulz (Author)

Core Data in Swift: Data Storage and Management for iOS and OS X
by Marcus S. Zarra (Author)

Holographic Data Storage: From Theory to Practical Systems
by Kevin Curtis (Author), Lisa Dhar (Author), Adrian Hill (Author), William Wilson (Author), Mark Ayres (Author)

Building Cloud Apps with Microsoft Azure: Best Practices for DevOps, Data Storage, High Availability, and More (Developer Reference)
by Microsoft Press

Computer Engineering, Data Storage, Networking and Security (Book)
by Nikola Zlatanov (Author)

MongoDB: The Definitive Guide: Powerful and Scalable Data Storage
by Kristina Chodorow (Author)

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Approaching With Kindness
We often forget to say the words "thank you." But can those two words change how you — and those around you — look at the world? This hour, TED speakers on the power of gratitude and appreciation. Guests include author AJ Jacobs, author and former baseball player Mike Robbins, Dr. Laura Trice, Professor of Management Christine Porath, and former Danish politician Özlem Cekic.
Now Playing: Science for the People

#509 Anisogamy: The Beginning of Male and Female
This week we discuss how the sperm and egg came to be, and how a difference of reproductive interest has led to sexual conflict in bed bugs. We'll be speaking with Dr. Geoff Parker, an evolutionary biologist credited with developing a theory to explain the evolution of two sexes, about anisogamy, sexual reproduction through the fusion of two different gametes: the egg and the sperm. Then we'll speak with Dr. Roberto Pereira, research scientist in urban entomology at the University of Florida, about traumatic insemination in bed bugs.